On Fri, 21 May 2021 19:14:14 +0200 Hans de Goede hdegoede@redhat.com wrote:
The Lenovo Yoga 300-11IBR has a ACPI fwnode with a HID of DUAL250E which contains I2C and IRQ resources for 2 accelerometers, 1 in the display and one in the base of the device. Add support for this.
Signed-off-by: Hans de Goede hdegoede@redhat.com
drivers/iio/accel/bmc150-accel-i2c.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c index e24ce28a4660..b81e4005788e 100644 --- a/drivers/iio/accel/bmc150-accel-i2c.c +++ b/drivers/iio/accel/bmc150-accel-i2c.c @@ -24,6 +24,7 @@ #ifdef CONFIG_ACPI static const struct acpi_device_id bmc150_acpi_dual_accel_ids[] = { {"BOSC0200"},
- {"DUAL250E"}, { },
};
@@ -35,21 +36,24 @@ static void bmc150_acpi_dual_accel_probe(struct i2c_client *client) { struct acpi_device *adev = ACPI_COMPANION(&client->dev); struct i2c_client *second_dev;
- char dev_name[16];
I'm a bit in two minds about having a fixed length array for this. Obviously this is always big enough (I think a bit too big), but it might be a place where a future bug is introduced. Perhaps it's worth the dance of a kasprintf and kfree, to avoid that possibility?
struct i2c_board_info board_info = { .type = "bmc150_accel",
/** The 2nd accel sits in the base of 2-in-1s. Note this* name is static, as there should never be more then 1* BOSC0200 ACPI node with 2 accelerometers in it.*/.dev_name = "BOSC0200:base",
.dev_name = dev_name,
.irq = -ENOENT,};
if (acpi_match_device_ids(adev, bmc150_acpi_dual_accel_ids)) return;
- /*
* The 2nd accel sits in the base of 2-in-1s. The suffix is static, as* there should never be more then 1 ACPI node with 2 accelerometers in it.*/- snprintf(dev_name, sizeof(dev_name), "%s:base", acpi_device_hid(adev));
- board_info.irq = acpi_dev_gpio_irq_get_by(adev, NULL, 1);
- second_dev = i2c_acpi_new_device(&client->dev, 1, &board_info); if (!IS_ERR(second_dev)) bmc150_set_second_device(client, second_dev);
@@ -114,6 +118,7 @@ static const struct acpi_device_id bmc150_accel_acpi_match[] = { {"BMA222E", bma222e}, {"BMA0280", bma280}, {"BOSC0200"},
- {"DUAL250E"}, { },
}; MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);