
At Mon, 23 Apr 2007 11:05:19 +0000, Ben DiDonc wrote:
Takashi, I did try passing model=auto to all 14 release candidates,
Did you already try the HG version (or daily snapshot), right?
but without success. the codec is never detected (see my previous posts for alsa-info.sh outputs with both 2.6.20 and 2.6.17). My problem is I cant get my sound card to work with kernel 2.6.20, when it used to work with 2.6.17.
The codec mask probed is 0x09, so you can pass either probe_mask=8 or probe_mask=1 to skip the modem detection (if it matters).
Takashi
Ben
On 4/23/07, Takashi Iwai tiwai@suse.de wrote:
At Mon, 23 Apr 2007 10:50:18 +0000, Ben DiDonc wrote:
Tobin, Unfortunately, ACPI was on at all times. My laptop hardly ever boots without ACPI (randomly, the SATA driver fails before it can even mount the root partition). I ran some more tests today: I loaded Ubuntu Edgy from the live CD where the sound chip used to work (kernel 2.6.17, alsa driver 1.0.12rc1). Obviously the sound works straight away. From there , I ran the same series of test: download and build (--with-debug=detect) the next version of alsa-driver, run a capture from mic and try playing it back, check syslog and run alsa-info.sh. I did this for successive versions of alsa-driver (starting with 1.0.12) until it fails. Here are the results:
Alsa driver 1.0.12rc1(shipped with edgy): capture: working, playback working, alsa-info.sh at http://pastebin.ca/453947
Alsa driver 1.0.12: (alsa-info.sh at http://pastebin.ca/453971 ) syslog lines after modprobe: ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 233 ALSA alsa-driver-1.0.12/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:663: codec_mask = 0x9 hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... ALSA alsa-driver-1.0.12/pci/hda/hda_codec.c:2150: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) ALSA alsa-driver-1.0.12/pci/hda/hda_codec.c:2154: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA alsa-driver-1.0.12/pci/hda/hda_codec.c:2156: hp=0x0, dig_out=0x0, din_in=0x0 ALSA alsa-driver-1.0.12/pci/hda/hda_codec.c:2164: inputs: mic=0xd, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0
capture: working //capture starting hda_intel.c:1124: azx_pcm_prepare: bufsize=0x10000, fragsize=0x1000, format=0x11 hda_codec.c:628: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x11 //capture stopping hda_codec.c:628: hda_codec_setup_stream: NID=0x8, stream=0x0, channel=0, format=0x0
playback: working //starting ALSA hda_intel.c:1124: azx_pcm_prepare: bufsize=0x10000, fragsize=0x1000, format=0x11 ALSA hda_codec.c:628: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x11 //stopping ALSA hda_codec.c:628: hda_codec_setup_stream: NID=0x3, stream=0x0, channel=0, format=0x0
alsa-driver-1.0.13 (alsa-info.sh at http://pastebin.ca/453975 ) modprobe snd-hda-intel: hda_intel.c:680: codec_mask = 0x9 hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... hda_codec.c:2164: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) hda_codec.c:2168: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) hda_codec.c:2172: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) hda_codec.c:2180: inputs: mic=0xd, fmic=0x0, line=0x0, fline=0x0, cd=0x11, aux=0x0 capture works fine, syslog output similar to 1.0.12 plus an extra "hda-intel: Invalid position buffer, using LPIB read method instead" in the middle of the capture. Playback works fine too, with the same syslog entries as 1.0.12
alsa-driver-1.0.14rc1 (alsa-info.sh at http://pastebin.ca/453991 ) modprobe: ALSA hda_intel.c:696: codec_mask = 0x9 ALSA hda_codec.c:1768: hda_codec: model 'toshiba' is selected for config 1179:ff10 (Toshiba) Capture works (output similar to 1.0.12) Playback does NOT work this time: syslog shows a call to azx_pcm_prepare: and 4 calls to hda_codec_setup_stream with different nids (3, 6 ,5, 4 as pointed out my previous post)
alsa-driver-1.0.14rc2 (alsa-info.sh at http://pastebin.ca/453799 ) modprobe: the codec is correctly detected ALSA hda_intel.c:696: codec_mask = 0x9 ALSA hda_codec.c:1764: hda_codec: model 'toshiba' is selected for config 1179:ff10 (Toshiba) Capture works. Playback does NOT work, same syslog entries as 1.0.14rc1 with multiple calls to hda_codec_setup_stream
alsa-driver-1.0.14rc3 (alsa-info.sh at http://pastebin.ca/453785 ) modprobe: the codec isnt detected. ALSA hda_intel.c:696: codec_mask = 0x9 capture and playback dont work.
Summary: I tried alsa-driver 1.012 through to 1.0.14rc3 on ubuntu edgy (kernel 2.6.17). 12 and 13 work fine, 14rc1 and 2 capture works but not playback, 14rc3 doesnt detect the codec. What next ? not sure, maybe make a diff of alsa-kernel/pci/hda-intel between releases 13 and 14 ...
Try to pass model=auto to snd-hda-intel module, and check whether it works (make sure that you have unmuted/adjusted mixer elements before that). Then get /proc/asound/card0/codec#* files, and compare with the files without model option.
Takashi