According to i.MX Reference Manual, the bit-clock frequency generated by SSI must be never greater than 1/5 of the peripheral clock frequency.
This peripheral clock, however, is not baudclk but the IPG clock (i.e. ssi_private->clk in the fsl_ssi driver).
So this patch just simply fixes the incorrect limitation applied to the bit clock (baudclk) rate.
Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com --- sound/soc/fsl/fsl_ssi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 059496e..d7365c5 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -603,10 +603,6 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, factor = (div2 + 1) * (7 * psr + 1) * 2;
for (i = 0; i < 255; i++) { - /* The bclk rate must be smaller than 1/5 sysclk rate */ - if (factor * (i + 1) < 5) - continue; - tmprate = freq * factor * (i + 2);
if (baudclk_is_used) @@ -614,6 +610,13 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, else clkrate = clk_round_rate(ssi_private->baudclk, tmprate);
+ /* + * Hardware limitation: The bclk rate must be + * never greater than 1/5 IPG clock rate + */ + if (clkrate * 5 > clk_get_rate(ssi_private->clk)) + continue; + clkrate /= factor; afreq = clkrate / (i + 1);