Jacks are created but only enabled when the external TI chip is present, this probably never worked as well. Forklift the gpio-based code from the legacy byt-max98090 driver, with however a less strict error check. It's fine to let users enjoy their device even if jack detection doesn't work - it almost never does without quirks...
Tested on Lenovo100s
CC: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 56 +++++++++++++++++++++++++++- 1 file changed, 55 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/cht_bsw_max98090_ti.c b/sound/soc/intel/boards/cht_bsw_max98090_ti.c index a1502c7..74c047a 100644 --- a/sound/soc/intel/boards/cht_bsw_max98090_ti.c +++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c @@ -159,6 +159,40 @@ static struct notifier_block cht_jack_nb = { .notifier_call = cht_ti_jack_event, };
+static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static struct snd_soc_jack_gpio hs_jack_gpios[] = { + { + .name = "hp", + .report = SND_JACK_HEADPHONE | SND_JACK_LINEOUT, + .debounce_time = 200, + }, + { + .name = "mic", + .invert = 1, + .report = SND_JACK_MICROPHONE, + .debounce_time = 200, + }, +}; + +static const struct acpi_gpio_params hp_gpios = { 0, 0, false }; +static const struct acpi_gpio_params mic_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_max98090_gpios[] = { + { "hp-gpios", &hp_gpios, 1 }, + { "mic-gpios", &mic_gpios, 1 }, + {}, +}; + static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) { int ret; @@ -178,15 +212,29 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE;
ret = snd_soc_card_jack_new(runtime->card, "Headset Jack", - jack_type, jack, NULL, 0); + jack_type, jack, + hs_jack_pins, ARRAY_SIZE(hs_jack_pins)); if (ret) { dev_err(runtime->dev, "Headset Jack creation failed %d\n", ret); return ret; }
+ if (ctx->ts3a227e_present) snd_soc_jack_notifier_register(jack, &cht_jack_nb);
+ ret = snd_soc_jack_add_gpiods(runtime->card->dev->parent, jack, + ARRAY_SIZE(hs_jack_gpios), + hs_jack_gpios); + if (ret) { + /* + * flag error but don't bail if jack detect is broken + * due to platform issues or bad BIOS/configuration + */ + dev_err(runtime->dev, + "jack detection gpios not added, error %d\n", ret); + } + /* * The firmware might enable the clock at * boot (this information may or may not @@ -363,6 +411,7 @@ static struct snd_soc_card snd_soc_card_cht = {
static int snd_cht_mc_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; int ret_val = 0; struct cht_mc_private *drv;
@@ -375,6 +424,11 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* no need probe TI jack detection chip */ snd_soc_card_cht.aux_dev = NULL; snd_soc_card_cht.num_aux_devs = 0; + + ret_val = devm_acpi_dev_add_driver_gpios(dev->parent, + acpi_max98090_gpios); + if (ret_val) + dev_dbg(dev, "Unable to add GPIO mapping table\n"); }
/* register the soc card */