
On Mon, Apr 25, 2022 at 02:16:02PM -0500, Daniel Kaehn wrote:
Adds dt-binding for snd-serial-generic serial MIDI driver
Bindings are for h/w and there's no such thing as generic h/w. There are some exceptions but you'll have to justify why this is special.
Signed-off-by: Daniel Kaehn kaehndan@gmail.com
.../devicetree/bindings/sound/serialmidi.yaml | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/serialmidi.yaml
diff --git a/Documentation/devicetree/bindings/sound/serialmidi.yaml b/Documentation/devicetree/bindings/sound/serialmidi.yaml new file mode 100644 index 000000000000..38ef49a0c2f9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/serialmidi.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/serialmidi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Generic Serial MIDI Device
+maintainers:
- Daniel Kaehn kaehndan@gmail.com
+description: |
Don't need '|' unless there is formatting to preserve.
- Generic MIDI interface using a serial device. Can only be set to use standard speeds
- corresponding to supported baud rates of the underlying serial device. If standard MIDI
- speed of 31.25 kBaud is needed, configure the clocks of the underlying serial device
- so that a requested speed of 38.4 kBaud resuts in the standard MIDI baud rate.
+properties:
- compatible:
- const: serialmidi
- speed:
Not a standard property and we already have 2 of them concerning baud rate.
- maxItems: 1
- description: |
Speed to set the serial port to when the MIDI device is opened.
If not specified, the underlying serial device is allowed to use its configured default speed.
+required:
- compatible
+additionalProperties: false
+examples:
- |
- serial {
midi {
compatible = "serialmidi";
speed = <38400>;
};
- };
-- 2.33.0