In order to make sure that the sample rate is in the supported range of both components the maximum rate of the card should be the minimum of the maximum rate of each components. There is one special case to consider though, if max_rate is set to 0 this means there is no maximum specified, so use min_not_zero() macro which will give use the desired result.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/soc-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 170ff96..c4ef880 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -220,7 +220,7 @@ static void soc_pcm_init_runtime_hw(struct snd_pcm_hardware *hw, struct snd_soc_pcm_stream *cpu_stream) { hw->rate_min = max(codec_stream->rate_min, cpu_stream->rate_min); - hw->rate_max = max(codec_stream->rate_max, cpu_stream->rate_max); + hw->rate_max = min_not_zero(codec_stream->rate_max, cpu_stream->rate_max); hw->channels_min = max(codec_stream->channels_min, cpu_stream->channels_min); hw->channels_max = min(codec_stream->channels_max,