From: Dmitry Baryshkov dbaryshkov@gmail.com
Support building of pxa2xx-ac97-lib for several CPUs by making code run-time selected, not only compile-time.
[Fixed 3XX->3xx typos in ifdef checks -- broonie.]
Signed-off-by: Dmitry Baryshkov dbaryshkov@gmail.com Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/arm/pxa2xx-ac97-lib.c | 215 +++++++++++++++++++++++++++---------------- 1 files changed, 137 insertions(+), 78 deletions(-)
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 95f8ead..99026df 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -30,9 +30,7 @@ static DEFINE_MUTEX(car_mutex); static DECLARE_WAIT_QUEUE_HEAD(gsr_wq); static volatile long gsr_bits; static struct clk *ac97_clk; -#ifdef CONFIG_PXA27x static struct clk *ac97conf_clk; -#endif
/* * Beware PXA27x bugs: @@ -52,14 +50,10 @@ unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97, unsigned short reg) mutex_lock(&car_mutex);
/* set up primary or secondary codec space */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE; -#else - if (reg == AC97_GPIO_STATUS) + if ((cpu_is_pxa21x() || cpu_is_pxa25x()) && reg == AC97_GPIO_STATUS) reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; else reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; -#endif reg_addr += (reg >> 1);
/* start read access across the ac97 link */ @@ -96,14 +90,10 @@ void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, mutex_lock(&car_mutex);
/* set up primary or secondary codec space */ -#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) - reg_addr = (ac97->num & 1) ? &SAC_REG_BASE : &PAC_REG_BASE; -#else - if (reg == AC97_GPIO_STATUS) + if ((cpu_is_pxa21x() || cpu_is_pxa25x()) && reg == AC97_GPIO_STATUS) reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE; else reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE; -#endif reg_addr += (reg >> 1);
GSR = GSR_CDONE | GSR_SDONE; @@ -118,14 +108,33 @@ void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg, } EXPORT_SYMBOL_GPL(pxa2xx_ac97_write);
-bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) +#ifdef CONFIG_PXA25x +static inline void pxa_ac97_warm_pxa25x(void) { -#ifdef CONFIG_PXA3xx - int timeout = 100; -#endif gsr_bits = 0;
+ GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; + wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +} + +static inline void pxa_ac97_cold_pxa25x(void) +{ + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; + + GCR = GCR_COLD_RST; + GCR |= GCR_CDONE_IE|GCR_SDONE_IE; + wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +} +#endif + #ifdef CONFIG_PXA27x +static inline void pxa_ac97_warm_pxa27x(void) +{ + gsr_bits = 0; + /* warm reset broken on Bulverde, so manually keep AC97 reset high */ pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH); @@ -133,30 +142,39 @@ bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) GCR |= GCR_WARM_RST; pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); udelay(500); -#elif defined(CONFIG_PXA3xx) - /* Can't use interrupts */ - GCR |= GCR_WARM_RST; - while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) - mdelay(1); -#else - GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +} + +static inline void pxa_ac97_cold_pxa27x(void) +{ + GCR &= GCR_COLD_RST; /* clear everything but nCRST */ + GCR &= ~GCR_COLD_RST; /* then assert nCRST */ + + gsr_bits = 0; + + /* PXA27x Developers Manual section 13.5.2.2.1 */ + clk_enable(ac97conf_clk); + udelay(5); + clk_disable(ac97conf_clk); + GCR = GCR_COLD_RST; + udelay(50); +} #endif
- if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) { - printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", - __func__, gsr_bits); +#ifdef CONFIG_PXA3xx +static inline void pxa_ac97_warm_pxa3xx(void) +{ + int timeout = 100;
- return false; - } + gsr_bits = 0;
- return true; + /* Can't use interrupts */ + GCR |= GCR_WARM_RST; + while (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)) && timeout--) + mdelay(1); } -EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset);
-bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) +static inline void pxa_ac97_cold_pxa3xx(void) { -#ifdef CONFIG_PXA3xx int timeout = 1000;
/* Hold CLKBPB for 100us */ @@ -164,31 +182,69 @@ bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) GCR = GCR_CLKBPB; udelay(100); GCR = 0; -#endif
GCR &= GCR_COLD_RST; /* clear everything but nCRST */ GCR &= ~GCR_COLD_RST; /* then assert nCRST */
gsr_bits = 0; -#ifdef CONFIG_PXA27x - /* PXA27x Developers Manual section 13.5.2.2.1 */ - clk_enable(ac97conf_clk); - udelay(5); - clk_disable(ac97conf_clk); - GCR = GCR_COLD_RST; - udelay(50); -#elif defined(CONFIG_PXA3xx) + /* Can't use interrupts on PXA3xx */ GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR = GCR_WARM_RST | GCR_COLD_RST; while (!(GSR & (GSR_PCR | GSR_SCR)) && timeout--) mdelay(10); -#else - GCR = GCR_COLD_RST; - GCR |= GCR_CDONE_IE|GCR_SDONE_IE; - wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1); +} +#endif + +bool pxa2xx_ac97_try_warm_reset(struct snd_ac97 *ac97) +{ +#ifdef CONFIG_PXA25x + if (cpu_is_pxa21x() || cpu_is_pxa25x()) + pxa_ac97_warm_pxa25x(); + else #endif +#ifdef CONFIG_PXA27x + if (cpu_is_pxa27x()) + pxa_ac97_warm_pxa27x(); + else +#endif +#ifdef CONFIG_PXA3xx + if (cpu_is_pxa3xx()) + pxa_ac97_warm_pxa3xx(); + else +#endif + BUG(); + + if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) { + printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n", + __func__, gsr_bits); + + return false; + } + + return true; +} +EXPORT_SYMBOL_GPL(pxa2xx_ac97_try_warm_reset); + +bool pxa2xx_ac97_try_cold_reset(struct snd_ac97 *ac97) +{ +#ifdef CONFIG_PXA25x + if (cpu_is_pxa21x() || cpu_is_pxa25x()) + pxa_ac97_cold_pxa25x(); + else +#endif +#ifdef CONFIG_PXA27x + if (cpu_is_pxa27x()) + pxa_ac97_cold_pxa27x(); + else +#endif +#ifdef CONFIG_PXA3xx + if (cpu_is_pxa3xx()) + pxa_ac97_cold_pxa3xx(); + else +#endif + BUG();
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR))) { printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n", @@ -219,14 +275,14 @@ static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id) gsr_bits |= status; wake_up(&gsr_wq);
-#ifdef CONFIG_PXA27x /* Although we don't use those we still need to clear them since they tend to spuriously trigger when MMC is used (hardware bug? go figure)... */ - MISR = MISR_EOC; - PISR = PISR_EOC; - MCSR = MCSR_EOC; -#endif + if (cpu_is_pxa27x()) { + MISR = MISR_EOC; + PISR = PISR_EOC; + MCSR = MCSR_EOC; + }
return IRQ_HANDLED; } @@ -245,14 +301,16 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_suspend);
int pxa2xx_ac97_hw_resume(void) { - pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); -#ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); -#endif + if (cpu_is_pxa21x() || cpu_is_pxa25x() || cpu_is_pxa27x()) { + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); + } + if (cpu_is_pxa27x()) { + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + } clk_enable(ac97_clk); return 0; } @@ -267,20 +325,23 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) if (ret < 0) goto err;
- pxa_gpio_mode(GPIO31_SYNC_AC97_MD); - pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); - pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); - pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); -#ifdef CONFIG_PXA27x - /* Use GPIO 113 as AC97 Reset on Bulverde */ - pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); - ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); - if (IS_ERR(ac97conf_clk)) { - ret = PTR_ERR(ac97conf_clk); - ac97conf_clk = NULL; - goto err_irq; + if (cpu_is_pxa21x() || cpu_is_pxa25x() || cpu_is_pxa27x()) { + pxa_gpio_mode(GPIO31_SYNC_AC97_MD); + pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD); + pxa_gpio_mode(GPIO28_BITCLK_AC97_MD); + pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD); + } + + if (cpu_is_pxa27x()) { + /* Use GPIO 113 as AC97 Reset on Bulverde */ + pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT); + ac97conf_clk = clk_get(&dev->dev, "AC97CONFCLK"); + if (IS_ERR(ac97conf_clk)) { + ret = PTR_ERR(ac97conf_clk); + ac97conf_clk = NULL; + goto err_irq; + } } -#endif
ac97_clk = clk_get(&dev->dev, "AC97CLK"); if (IS_ERR(ac97_clk)) { @@ -293,12 +354,10 @@ int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
err_irq: GCR |= GCR_ACLINK_OFF; -#ifdef CONFIG_PXA27x if (ac97conf_clk) { clk_put(ac97conf_clk); ac97conf_clk = NULL; } -#endif free_irq(IRQ_AC97, NULL); err: return ret; @@ -309,10 +368,10 @@ void pxa2xx_ac97_hw_remove(struct platform_device *dev) { GCR |= GCR_ACLINK_OFF; free_irq(IRQ_AC97, NULL); -#ifdef CONFIG_PXA27x - clk_put(ac97conf_clk); - ac97conf_clk = NULL; -#endif + if (ac97conf_clk) { + clk_put(ac97conf_clk); + ac97conf_clk = NULL; + } clk_disable(ac97_clk); clk_put(ac97_clk); ac97_clk = NULL;