Hi David,
-----Original Message----- From: alsa-devel-bounces@alsa-project.org [mailto:alsa-devel-bounces@alsa-project.org] On Behalf Of David Henningsson Sent: Tuesday, June 25, 2013 5:02 PM To: Wang, Xingchao Cc: Takashi Iwai; alsa-devel@alsa-project.org Subject: Re: [alsa-devel] [PATCH 2/2] ALSA: hda - get realtime ELD info when codec suspended
On 06/25/2013 09:55 AM, Takashi Iwai wrote:
At Tue, 25 Jun 2013 09:45:04 +0200, David Henningsson wrote:
There is a low power mode that allows the jack detection, but this is different from the aggressive power-saving with runtime D3.
If "aggressive power-saving with runtime D3" is the same as AZX_DCAPS_PM_RUNTIME, this is also enabled for analog codecs connected to a Lynx point controller.
It looks like userspace have problems getting notifications for e g headphone insertion on Lynx point controllers, so this is not only an HDMI/DP problem?
Yes.
Trying to read up a little on this, there seem to be an option to set the WAKEEN register to have jack detection working even when the controller is in D3. (refer HDA specification 4.5.9.2: Codec Wake From System S0, Controller D3.) But it seems we do not (yet) use this feature. Is this something that could/should be implemented to fix the jack detection problems that seems to be happening otherwise?
It sounds feasible, at least for traditional jack detection of analog pins. But I'm not sure whether this would help for the Intel graphics case. Just need testing.
Xingchao, what are your thoughts about using WAKEEN to wakeup both Lynx point and Haswell HDMI?
That's okay for me, I would do some test on that. do you have some test cases? That would help me verify them when enable WAKEEN feature.
Thanks --xingchao
-- David Henningsson, Canonical Ltd. https://launchpad.net/~diwic _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel