Currently we set hdac_stream.fifo_size field only for the playback stream by some odd reason I forgot, while this field isn't referred in any places. Actually this fifo_size field would have been required in the position report correction for VIA chipset, but due to the lack of the fifo_size set for capture streams, snd-hda-intel driver fetches the register by itself.
This patch straightens and simplifies the code by setting the fifo_size field for both playback and capture streams, and use it in the HD-audio controller driver.
Signed-off-by: Takashi Iwai tiwai@suse.de --- sound/hda/hdac_stream.c | 6 +----- sound/pci/hda/hda_intel.c | 8 +------- 2 files changed, 2 insertions(+), 12 deletions(-)
diff --git a/sound/hda/hdac_stream.c b/sound/hda/hdac_stream.c index fc68d4ce0a37..d8fe7ff0cd58 100644 --- a/sound/hda/hdac_stream.c +++ b/sound/hda/hdac_stream.c @@ -229,11 +229,7 @@ int snd_hdac_stream_setup(struct hdac_stream *azx_dev) /* set the interrupt enable bits in the descriptor control register */ snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK);
- if (azx_dev->direction == SNDRV_PCM_STREAM_PLAYBACK) - azx_dev->fifo_size = - snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1; - else - azx_dev->fifo_size = 0; + azx_dev->fifo_size = snd_hdac_stream_readw(azx_dev, SD_FIFOSIZE) + 1;
/* when LPIB delay correction gives a small negative value, * we ignore it; currently set the threshold statically to diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 3a209e07d5d8..dc8a83cb7393 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -84,8 +84,6 @@ enum { #define INTEL_SCH_HDA_DEVC 0x78 #define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11)
-/* Define IN stream 0 FIFO size offset in VIA controller */ -#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90 /* Define VIA HD Audio Device ID*/ #define VIA_HDAC_DEVICE_ID 0x3288
@@ -811,11 +809,7 @@ static unsigned int azx_via_get_position(struct azx *chip, mod_dma_pos = le32_to_cpu(*azx_dev->core.posbuf); mod_dma_pos %= azx_dev->core.period_bytes;
- /* azx_dev->fifo_size can't get FIFO size of in stream. - * Get from base address + offset. - */ - fifo_size = readw(azx_bus(chip)->remap_addr + - VIA_IN_STREAM0_FIFO_SIZE_OFFSET); + fifo_size = azx_stream(azx_dev)->fifo_size - 1;
if (azx_dev->insufficient) { /* Link position never gather than FIFO size */