This adds device tree support to tlv320dac33.c.
Signed-off-by: Pavel Machek pavel@ucw.cz
diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt new file mode 100644 index 0000000..6cbd311 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt @@ -0,0 +1,32 @@ +Texas Instruments - tlv320dac33 Codec module + +The tlv320dac33 serial control bus communicates through I2C protocols. + +Required properties: + +- compatible - "ti,tlv320dac33" +- reg - I2C slave address + +Optional properties: + +- power-gpios - gpio pin to power the device, active high + +- interrupts - The interrupt output from the device. +- interrupt-parent - The parent interrupt controller. + +- ti,keep-bclk - Keep the BCLK running in FIFO modes +- ti,burst-bclkdiv - BCLK divider value in burst mode + +Example: + +tlv320dac33: audio-codec@19 { + compatible = "ti,tlv320dac33"; + reg = <0x19>; + + interrupt-parent = <&gpio2>; + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ + power-gpio = <&gpio2 28 0>; /* gpio_60 */ + + ti,keep-bclk; + ti,burst-bclkdiv = <3>; +}; diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 5b94a15..2a0fe06 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -30,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> +#include <linux/of_gpio.h> #include <linux/slab.h> #include <sound/core.h> #include <sound/pcm.h> @@ -105,7 +108,7 @@ struct tlv320dac33_priv { unsigned int nsample; /* burst read amount from host */ int mode1_latency; /* latency caused by the i2c writes in * us */ - u8 burst_bclkdiv; /* BCLK divider value in burst mode */ + u32 burst_bclkdiv; /* BCLK divider value in burst mode */ unsigned int burst_rate; /* Interface speed in Burst modes */
int keep_bclk; /* Keep the BCLK continuously running @@ -1484,16 +1487,11 @@ static struct snd_soc_dai_driver dac33_dai = { static int dac33_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { - struct tlv320dac33_platform_data *pdata; + struct tlv320dac33_platform_data *pdata = client->dev.platform_data; struct tlv320dac33_priv *dac33; + struct device_node *np = client->dev.of_node; int ret, i;
- if (client->dev.platform_data == NULL) { - dev_err(&client->dev, "Platform data not set\n"); - return -ENODEV; - } - pdata = client->dev.platform_data; - dac33 = devm_kzalloc(&client->dev, sizeof(struct tlv320dac33_priv), GFP_KERNEL); if (dac33 == NULL) @@ -1505,10 +1503,26 @@ static int dac33_i2c_probe(struct i2c_client *client,
i2c_set_clientdata(client, dac33);
- dac33->power_gpio = pdata->power_gpio; - dac33->burst_bclkdiv = pdata->burst_bclkdiv; - dac33->keep_bclk = pdata->keep_bclk; - dac33->mode1_latency = pdata->mode1_latency; + if (pdata) { + dac33->power_gpio = pdata->power_gpio; + dac33->burst_bclkdiv = pdata->burst_bclkdiv; + dac33->keep_bclk = pdata->keep_bclk; + dac33->mode1_latency = pdata->mode1_latency; + } else if (np) { + ret = of_get_named_gpio(np, "power-gpios", 0); + if (ret >= 0) + dac33->power_gpio = ret; + else + dac33->power_gpio = -1; + + if (of_property_read_bool(np, "ti,keep-bclk")) + dac33->keep_bclk = true; + + of_property_read_u32(np, "ti,burst-bclkdiv", &dac33->burst_bclkdiv); + } else { + dev_err(&client->dev, "Platform data not set\n"); + return -ENODEV; + } if (!dac33->mode1_latency) dac33->mode1_latency = 10000; /* 10ms */ dac33->irq = client->irq; @@ -1574,9 +1588,16 @@ static const struct i2c_device_id tlv320dac33_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, tlv320dac33_i2c_id);
+static const struct of_device_id tlv320dac33_of_match[] = { + { .compatible = "ti,tlv320dac33", }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, tlv320dac33_of_match); + static struct i2c_driver tlv320dac33_i2c_driver = { .driver = { .name = "tlv320dac33-codec", + .of_match_table = of_match_ptr(tlv320dac33_of_match), }, .probe = dac33_i2c_probe, .remove = dac33_i2c_remove,