On 02/04/2023 22:57, Saalim Quadri wrote:
Convert the WM8510 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri danascape@gmail.com
.../devicetree/bindings/sound/wlf,wm8510.yaml | 39 +++++++++++++++++++ .../devicetree/bindings/sound/wm8510.txt | 18 --------- 2 files changed, 39 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8510.yaml delete mode 100644 Documentation/devicetree/bindings/sound/wm8510.txt
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml new file mode 100644 index 000000000000..f45dad0fbef3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/wlf,wm8510.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: WM8510 audio CODEC
+description: |
- These devices support both I2C and SPI (configured with pin strapping
- on the board).
+maintainers:
- Mark Brown broonie@kernel.org
This should be rather someone from Cirrus or their regular contact - patches@opensource.cirrus.com.
Also missing $ref to dai-common.yaml
+properties:
- compatible:
- const: wlf,wm8510
- reg:
- description:
The I2C address of the device for I2C, the chip select number for SPI
Drop description, it is obvious.
- maxItems: 1
sound-dai-cells with const:0
+additionalProperties: false
This goes after required. Look at example-schema. Anyway this should be unevaluatedProperties: false, after adding the $ref.
+required:
Missing compatible.
- reg
+examples:
- |
- i2c {
#address-cells = <1>;
#size-cells = <0>;
codec@1a {
compatible = "wlf,wm8510";
reg = <0x1a>;
};
- };
diff --git a/Documentation/devicetree/bindings/sound/wm8510.txt b/Documentation/devicetree/bindings/sound/wm8510.txt deleted file mode 100644 index e6b6cc041f89..000000000000 --- a/Documentation/devicetree/bindings/sound/wm8510.txt +++ /dev/null @@ -1,18 +0,0 @@ -WM8510 audio CODEC
-This device supports both I2C and SPI (configured with pin strapping -on the board).
-Required properties:
- compatible : "wlf,wm8510"
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
-Example:
-wm8510: codec@1a {
- compatible = "wlf,wm8510";
- reg = <0x1a>;
-};
Best regards, Krzysztof