Hi Takashi,
Could I move the alc294_hp_init(codec) to below line. Because hp_pin = spec->gen.autocfg.hp_pins[0] was null value when alc294_hp_init(codec) at original line. Or move alc269_parse_auto_config() upward.
BR, Kailang --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7514,7 +7514,6 @@ static int patch_alc269(struct hda_codec *codec) spec->codec_variant = ALC269_TYPE_ALC294; spec->gen.mixer_nid = 0; /* ALC2x4 does not have any loopback mixer path */ alc_update_coef_idx(codec, 0x6b, 0x0018, (1<<4) | (1<<3)); /* UAJ MIC Vref control by verb */ - alc294_hp_init(codec); break; case 0x10ec0300: spec->codec_variant = ALC269_TYPE_ALC300; @@ -7526,7 +7525,6 @@ static int patch_alc269(struct hda_codec *codec) spec->codec_variant = ALC269_TYPE_ALC700; spec->gen.mixer_nid = 0; /* ALC700 does not have any loopback mixer path */ alc_update_coef_idx(codec, 0x4a, 1 << 15, 0); /* Combo jack auto trigger control */ - alc294_hp_init(codec); break;
} @@ -7553,6 +7551,16 @@ static int patch_alc269(struct hda_codec *codec) if (err < 0) goto error;
+ switch (codec->core.vendor_id) { + case 0x10ec0234: + case 0x10ec0274: + case 0x10ec0294: + case 0x10ec0700: + case 0x10ec0701: + case 0x10ec0703: + alc294_hp_init(codec); + break; + } if (!spec->gen.no_analog && spec->gen.beep_nid && spec->gen.mixer_nid) { err = set_beep_amp(spec, spec->gen.mixer_nid, 0x04, HDA_INPUT); if (err < 0)