Instead of hard wiring the WCLK frequency at probe time do it runtime. The hard wired 88_96KHz was not even setting the correct bits since it was defined as (1 << 6) which will change the I2S_OUT_SEL bit and will leave the amplifier configured for 8KHz. At the same time clean up and fix the CFG3 register bits.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/codecs/tas2552.c | 43 +++++++++++++++++++++++++++++++++++++++++-- sound/soc/codecs/tas2552.h | 37 ++++++++++++++++++------------------- 2 files changed, 59 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c index 13b435f9a9b1..891e2c529df3 100644 --- a/sound/soc/codecs/tas2552.c +++ b/sound/soc/codecs/tas2552.c @@ -168,7 +168,7 @@ static int tas2552_hw_params(struct snd_pcm_substream *substream, int d; int cpf; u8 p, j; - u8 ser_ctrl1_reg; + u8 ser_ctrl1_reg, wclk_rate;
switch (params_width(params)) { case 16: @@ -206,6 +206,45 @@ static int tas2552_hw_params(struct snd_pcm_substream *substream, TAS2552_WORDLENGTH_MASK | TAS2552_CLKSPERFRAME_MASK, ser_ctrl1_reg);
+ switch (params_rate(params)) { + case 8000: + wclk_rate = TAS2552_WCLK_FREQ_8KHZ; + break; + case 11025: + case 12000: + wclk_rate = TAS2552_WCLK_FREQ_11_12KHZ; + break; + case 16000: + wclk_rate = TAS2552_WCLK_FREQ_16KHZ; + break; + case 22050: + case 24000: + wclk_rate = TAS2552_WCLK_FREQ_22_24KHZ; + break; + case 32000: + wclk_rate = TAS2552_WCLK_FREQ_32KHZ; + break; + case 44100: + case 48000: + wclk_rate = TAS2552_WCLK_FREQ_44_48KHZ; + break; + case 88200: + case 96000: + wclk_rate = TAS2552_WCLK_FREQ_88_96KHZ; + break; + case 176400: + case 192000: + wclk_rate = TAS2552_WCLK_FREQ_176_192KHZ; + break; + default: + dev_err(codec->dev, "Not supported sample rate: %d\n", + params_rate(params)); + return -EINVAL; + } + + snd_soc_update_bits(codec, TAS2552_CFG_3, TAS2552_WCLK_FREQ_MASK, + wclk_rate); + if (!tas2552->pll_clkin) return -EINVAL;
@@ -503,7 +542,7 @@ static int tas2552_codec_probe(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, TAS2552_CFG_1, TAS2552_MUTE, TAS2552_MUTE); snd_soc_write(codec, TAS2552_CFG_3, TAS2552_I2S_OUT_SEL | - TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ); + TAS2552_DIN_SRC_SEL_AVG_L_R); snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I); snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8); snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 | diff --git a/sound/soc/codecs/tas2552.h b/sound/soc/codecs/tas2552.h index de0ab0d27520..bbb820495516 100644 --- a/sound/soc/codecs/tas2552.h +++ b/sound/soc/codecs/tas2552.h @@ -62,6 +62,24 @@ #define TAS2552_LIM_EN (1 << 2) #define TAS2552_IVSENSE_EN (1 << 1)
+/* CFG3 Register Masks */ +#define TAS2552_WCLK_FREQ_8KHZ (0x0 << 0) +#define TAS2552_WCLK_FREQ_11_12KHZ (0x1 << 0) +#define TAS2552_WCLK_FREQ_16KHZ (0x2 << 0) +#define TAS2552_WCLK_FREQ_22_24KHZ (0x3 << 0) +#define TAS2552_WCLK_FREQ_32KHZ (0x4 << 0) +#define TAS2552_WCLK_FREQ_44_48KHZ (0x5 << 0) +#define TAS2552_WCLK_FREQ_88_96KHZ (0x6 << 0) +#define TAS2552_WCLK_FREQ_176_192KHZ (0x7 << 0) +#define TAS2552_WCLK_FREQ_MASK TAS2552_WCLK_FREQ_176_192KHZ +#define TAS2552_DIN_SRC_SEL_MUTED (0x0 << 3) +#define TAS2552_DIN_SRC_SEL_LEFT (0x1 << 3) +#define TAS2552_DIN_SRC_SEL_RIGHT (0x2 << 3) +#define TAS2552_DIN_SRC_SEL_AVG_L_R (0x3 << 3) +#define TAS2552_PDM_IN_SEL (1 << 5) +#define TAS2552_I2S_OUT_SEL (1 << 6) +#define TAS2552_ANALOG_IN_SEL (1 << 7) + /* DOUT Register Masks */ #define TAS2552_SDOUT_TRISTATE (1 << 2)
@@ -84,25 +102,6 @@ #define TAS2552_BCLKDIR (1 << 6) #define TAS2552_WCLKDIR (1 << 7)
-#define TAS2552_DIN_SRC_SEL_MUTED 0x00 -#define TAS2552_DIN_SRC_SEL_LEFT (1 << 4) -#define TAS2552_DIN_SRC_SEL_RIGHT (1 << 5) -#define TAS2552_DIN_SRC_SEL_AVG_L_R (0x11 << 4) - -#define TAS2552_PDM_IN_SEL (1 << 5) -#define TAS2552_I2S_OUT_SEL (1 << 6) -#define TAS2552_ANALOG_IN_SEL (1 << 7) - -/* CFG3 WCLK Dividers */ -#define TAS2552_8KHZ 0x00 -#define TAS2552_11_12KHZ (1 << 1) -#define TAS2552_16KHZ (1 << 2) -#define TAS2552_22_24KHZ (1 << 3) -#define TAS2552_32KHZ (1 << 4) -#define TAS2552_44_48KHZ (1 << 5) -#define TAS2552_88_96KHZ (1 << 6) -#define TAS2552_176_192KHZ (1 << 7) - /* OUTPUT_DATA register */ #define TAS2552_PDM_DATA_I 0x00 #define TAS2552_PDM_DATA_V (1 << 6)