The rxclk rate actually uses sysclk, ipg clock for example, as its reference clock to calculate it. But the driver currently doesn't pass a correct clock source. So fix it.
Signed-off-by: Nicolin Chen Guangyu.Chen@freescale.com ---
Changelog v2: * Use fixed name for sysclk fetching.
sound/soc/fsl/fsl_spdif.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index e2836b3..e7be6b3 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -81,6 +81,7 @@ struct fsl_spdif_priv { struct clk *txclk[SPDIF_TXRATE_MAX]; struct clk *rxclk; struct clk *coreclk; + struct clk *sysclk; struct snd_dmaengine_dai_dma_data dma_params_tx; struct snd_dmaengine_dai_dma_data dma_params_rx;
@@ -767,7 +768,7 @@ static int spdif_get_rxclk_rate(struct fsl_spdif_priv *spdif_priv, clksrc = (phaseconf >> SRPC_CLKSRC_SEL_OFFSET) & 0xf; if (srpc_dpll_locked[clksrc] && (phaseconf & SRPC_DPLL_LOCKED)) { /* Get bus clock from system */ - busclk_freq = clk_get_rate(spdif_priv->rxclk); + busclk_freq = clk_get_rate(spdif_priv->sysclk); }
/* FreqMeas_CLK = (BUS_CLK * FreqMeas) / 2 ^ 10 / GAINSEL / 128 */ @@ -1147,6 +1148,13 @@ static int fsl_spdif_probe(struct platform_device *pdev) return ret; }
+ /* Get system clock for rx clock rate calculation */ + spdif_priv->sysclk = devm_clk_get(&pdev->dev, "rxtx5"); + if (IS_ERR(spdif_priv->sysclk)) { + dev_err(&pdev->dev, "no sys clock (rxtx5) in devicetree\n"); + return PTR_ERR(spdif_priv->sysclk); + } + /* Get core clock for data register access via DMA */ spdif_priv->coreclk = devm_clk_get(&pdev->dev, "core"); if (IS_ERR(spdif_priv->coreclk)) {