Extend FLL clock source from MCLK/BCLK/FS. Modify FLL calculation and parameter setting.
Signed-off-by: John Hsu KCHSU0@nuvoton.com --- sound/soc/codecs/nau8825.c | 128 ++++++++++++++++++++++++++++++++------------- sound/soc/codecs/nau8825.h | 21 ++++++-- 2 files changed, 108 insertions(+), 41 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index c1b87c5..504c969 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -31,7 +31,7 @@ #include "nau8825.h"
#define NAU_FREF_MAX 13500000 -#define NAU_FVCO_MAX 100000000 +#define NAU_FVCO_MAX 124000000 #define NAU_FVCO_MIN 90000000
struct nau8825_fll { @@ -874,8 +874,8 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec) static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, struct nau8825_fll *fll_param) { - u64 fvco; - unsigned int fref, i; + u64 fvco, fvco_max; + unsigned int fref, i, fvco_sel;
/* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing * freq_in by 1, 2, 4, or 8 using FLL pre-scalar. @@ -900,18 +900,23 @@ static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, fll_param->ratio = fll_ratio[i].val;
/* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs. - * FDCO must be within the 90MHz - 100MHz or the FFL cannot be + * FDCO must be within the 90MHz - 124MHz or the FFL cannot be * guaranteed across the full range of operation. * FDCO = freq_out * 2 * mclk_src_scaling */ + fvco_max = 0; + fvco_sel = ARRAY_SIZE(mclk_src_scaling); for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { fvco = 256 * fs * 2 * mclk_src_scaling[i].param; - if (NAU_FVCO_MIN < fvco && fvco < NAU_FVCO_MAX) - break; + if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && + fvco_max < fvco) { + fvco_max = fvco; + fvco_sel = i; + } } - if (i == ARRAY_SIZE(mclk_src_scaling)) + if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel) return -EINVAL; - fll_param->mclk_src = mclk_src_scaling[i].val; + fll_param->mclk_src = mclk_src_scaling[fvco_sel].val;
/* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional * input based on FDCO, FREF and FLL ratio. @@ -926,7 +931,8 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, struct nau8825_fll *fll_param) { regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, - NAU8825_CLK_MCLK_SRC_MASK, fll_param->mclk_src); + NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, + NAU8825_CLK_SRC_MCLK | fll_param->mclk_src); regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, NAU8825_FLL_RATIO_MASK, fll_param->ratio); /* FLL 16-bit fractional input */ @@ -939,10 +945,25 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div); /* select divided VCO input */ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, - NAU8825_FLL_FILTER_SW_MASK, 0x0000); - /* FLL sigma delta modulator enable */ - regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, - NAU8825_SDM_EN_MASK, NAU8825_SDM_EN); + NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF); + /* Disable free-running mode */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); + if (fll_param->fll_frac) { + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_FILTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN, NAU8825_SDM_EN); + } else { + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU); + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_SDM_EN, 0); + } }
/* freq_out must be 256*Fs in order to achieve the best performance */ @@ -970,6 +991,36 @@ static int nau8825_set_pll(struct snd_soc_codec *codec, int pll_id, int source, return 0; }
+static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq) +{ + int ret = 0; + + /* We selected MCLK source but the clock itself managed externally */ + if (!nau8825->mclk) + return 0; + + if (!nau8825->mclk_freq) { + ret = clk_prepare_enable(nau8825->mclk); + if (ret) { + dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); + return ret; + } + } + + if (nau8825->mclk_freq != freq) { + nau8825->mclk_freq = freq; + + freq = clk_round_rate(nau8825->mclk, freq); + ret = clk_set_rate(nau8825->mclk, freq); + if (ret) { + dev_err(nau8825->dev, "Unable to set mclk rate\n"); + return ret; + } + } + + return 0; +} + static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, unsigned int freq) { @@ -981,29 +1032,9 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK); regmap_update_bits(regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); - - /* We selected MCLK source but the clock itself managed externally */ - if (!nau8825->mclk) - break; - - if (!nau8825->mclk_freq) { - ret = clk_prepare_enable(nau8825->mclk); - if (ret) { - dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); - return ret; - } - } - - if (nau8825->mclk_freq != freq) { - nau8825->mclk_freq = freq; - - freq = clk_round_rate(nau8825->mclk, freq); - ret = clk_set_rate(nau8825->mclk, freq); - if (ret) { - dev_err(nau8825->dev, "Unable to set mclk rate\n"); - return ret; - } - } + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret;
break; case NAU8825_CLK_INTERNAL: @@ -1011,7 +1042,32 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, NAU8825_DCO_EN); regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; + case NAU8825_CLK_FLL_MCLK: + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_MCLK); + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; + + break; + case NAU8825_CLK_FLL_BLK: + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_BLK); + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + }
+ break; + case NAU8825_CLK_FLL_FS: + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_FS); if (nau8825->mclk_freq) { clk_disable_unprepare(nau8825->mclk); nau8825->mclk_freq = 0; diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index dff8edb..8237693 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -112,20 +112,28 @@
/* FLL3 (0x06) */ #define NAU8825_FLL_INTEGER_MASK (0x3ff << 0) +#define NAU8825_FLL_CLK_SRC_SFT 10 +#define NAU8825_FLL_CLK_SRC_MASK (0x3 << NAU8825_FLL_CLK_SRC_SFT) +#define NAU8825_FLL_CLK_SRC_MCLK (0 << NAU8825_FLL_CLK_SRC_SFT) +#define NAU8825_FLL_CLK_SRC_BLK (0x2 << NAU8825_FLL_CLK_SRC_SFT) +#define NAU8825_FLL_CLK_SRC_FS (0x3 << NAU8825_FLL_CLK_SRC_SFT)
/* FLL4 (0x07) */ #define NAU8825_FLL_REF_DIV_MASK (0x3 << 10)
/* FLL5 (0x08) */ -#define NAU8825_FLL_FILTER_SW_MASK (0x1 << 14) +#define NAU8825_FLL_PDB_DAC_EN (0x1 << 15) +#define NAU8825_FLL_LOOP_FTR_EN (0x1 << 14) +#define NAU8825_FLL_CLK_SW_MASK (0x1 << 13) +#define NAU8825_FLL_CLK_SW_N2 (0x1 << 13) +#define NAU8825_FLL_CLK_SW_REF (0x0 << 13) +#define NAU8825_FLL_FTR_SW_MASK (0x1 << 12) +#define NAU8825_FLL_FTR_SW_ACCU (0x1 << 12) +#define NAU8825_FLL_FTR_SW_FILTER (0x0 << 12)
/* FLL6 (0x9) */ -#define NAU8825_DCO_EN_MASK (0x1 << 15) #define NAU8825_DCO_EN (0x1 << 15) -#define NAU8825_DCO_DIS (0x0 << 15) -#define NAU8825_SDM_EN_MASK (0x1 << 14) #define NAU8825_SDM_EN (0x1 << 14) -#define NAU8825_SDM_DIS (0x0 << 14)
/* HSD_CTRL (0xc) */ #define NAU8825_HSD_AUTO_MODE (1 << 6) @@ -306,6 +314,9 @@ enum { NAU8825_CLK_MCLK = 0, NAU8825_CLK_INTERNAL, + NAU8825_CLK_FLL_MCLK, + NAU8825_CLK_FLL_BLK, + NAU8825_CLK_FLL_FS, };
struct nau8825 {