From: Shuming Fan shumingf@realtek.com
We enable the silence detection function in initial settings. PDB control changes to manual mode, hence the driver could fully control the AMP output on/off.
Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/rt1308.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/rt1308.c b/sound/soc/codecs/rt1308.c index 19d255e01827..cf3d72f99705 100644 --- a/sound/soc/codecs/rt1308.c +++ b/sound/soc/codecs/rt1308.c @@ -40,10 +40,10 @@ static const struct reg_sequence init_list[] = { { RT1308_VREF, 0x18100000 }, { RT1308_IV_SENSE, 0x87010000 }, { RT1308_DUMMY_REG, 0x00000200 }, - { RT1308_SIL_DET, 0x61c30000 }, + { RT1308_SIL_DET, 0xe1c30000 }, { RT1308_DC_CAL_2, 0x00ffff00 }, { RT1308_CLK_DET, 0x01000000 }, - { RT1308_POWER_STATUS, 0x00800000 }, + { RT1308_POWER_STATUS, 0x08800000 }, { RT1308_DAC_SET, 0xafaf0700 },
}; @@ -308,12 +308,13 @@ static int rt1308_classd_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMU: msleep(30); snd_soc_component_update_bits(component, RT1308_POWER_STATUS, - RT1308_POW_PDB_REG_BIT, RT1308_POW_PDB_REG_BIT); + RT1308_POW_PDB_REG_BIT | RT1308_POW_PDB_MN_BIT, + RT1308_POW_PDB_REG_BIT | RT1308_POW_PDB_MN_BIT); msleep(40); break; case SND_SOC_DAPM_PRE_PMD: snd_soc_component_update_bits(component, RT1308_POWER_STATUS, - RT1308_POW_PDB_REG_BIT, 0); + RT1308_POW_PDB_REG_BIT | RT1308_POW_PDB_MN_BIT, 0); usleep_range(150000, 200000); break;