On 12/22/18 8:47 AM, Stephan Gerhold wrote:
Some devices detected as BYT-T by the PMIC-type based detection have only a single IRQ listed in the 80860F28 ACPI device. This causes -ENXIO later when attempting to get the IRQ at index 5. It turns out these devices behave more like BYT-CR devices, and using the IRQ at index 0 makes sound work correctly.
This patch adds a fallback for these devices to is_byt_cr(): If there is no IRQ resource at index 5, treating the device as BYT-T is guaranteed to fail later, so we can safely treat these devices as BYT-CR without breaking any working device.
Link: http://mailman.alsa-project.org/pipermail/alsa-devel/2018-December/143176.ht... Signed-off-by: Stephan Gerhold stephan@gerhold.net
Moved the "Detected Baytrail-CR platform" message to is_byt_cr() so we can log a different message if the fallback is used.
Tested this on my device as-is, and simulated a "normal" BYT-T and BYT-CR device (copied their IRQs to a custom DSDT).
sound/soc/intel/atom/sst/sst_acpi.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 3a95ebbfc45d..755a396121ff 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -255,10 +255,22 @@ static int is_byt(void) return status; }
-static int is_byt_cr(struct device *dev, bool *bytcr) +static int is_byt_cr(struct platform_device *pdev, bool *bytcr) {
struct device *dev = &pdev->dev; int status = 0;
if (platform_get_resource(pdev, IORESOURCE_IRQ, 5) == NULL) {
/** Some devices detected as BYT-T have only a single IRQ listed,* causing platform_get_irq with index 5 to return -ENXIO.* The correct IRQ in this case is at index 0, as used on BYT-CR.*/dev_info(dev, "Falling back to Baytrail-CR platform\n");*bytcr = true;return status;}
Isn't this going to bypass the PMIC-based detection on all BYT-CR devices? Maybe move this code as a fallback used when the PMIC-based detection isn't positive?
if (IS_ENABLED(CONFIG_IOSF_MBI)) { u32 bios_status;
@@ -278,10 +290,12 @@ static int is_byt_cr(struct device *dev, bool *bytcr) /* bits 26:27 mirror PMIC options */ bios_status = (bios_status >> 26) & 3;
if ((bios_status == 1) || (bios_status == 3))
if ((bios_status == 1) || (bios_status == 3)) {dev_info(dev, "Detected Baytrail-CR platform\n"); *bytcr = true;
else
} else { dev_info(dev, "BYT-CR not detected\n");}@@ -333,10 +347,8 @@ static int sst_acpi_probe(struct platform_device *pdev) if (ret < 0) return ret;
- ret = is_byt_cr(dev, &bytcr);
- ret = is_byt_cr(pdev, &bytcr); if (!(ret < 0 || !bytcr)) {
dev_info(dev, "Detected Baytrail-CR platform\n");- /* override resource info */ byt_rvp_platform_data.res_info = &bytcr_res_info; }