As a first cautious step, we're not going to trust the information coming directly from the i915 driver, we're just going to use the fact that there was an event to wakeup the codec and ask for its status.
This fixes the issue with lost unsol events in power save mode, the codec and controller can now sleep in D3 and still know when the HDMI monitor has been connected.
Signed-off-by: David Henningsson david.henningsson@canonical.com --- sound/pci/hda/patch_hdmi.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 2f24338..870b6d2 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -2316,6 +2316,15 @@ static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg, snd_hda_codec_set_power_to_all(codec, fg, power_state); }
+static void intel_hotplug_notify(struct hdac_device *dev, + const struct i915_audio_hotplug_info *info) +{ + struct hda_codec *codec = container_of(dev, struct hda_codec, core); + int pin_nid = is_valleyview(codec) ? 0x03 : info->port + 0x04; + + check_presence_and_report(codec, pin_nid); +} + static int patch_generic_hdmi(struct hda_codec *codec) { struct hdmi_spec *spec; @@ -2342,8 +2351,10 @@ static int patch_generic_hdmi(struct hda_codec *codec) if (is_valleyview_plus(codec) || is_skylake(codec)) codec->core.link_power_control = 1;
- if (is_haswell_plus(codec) || is_valleyview_plus(codec)) + if (is_haswell_plus(codec) || is_valleyview_plus(codec)) { codec->depop_delay = 0; + codec->core.i915_hotplug_notify = intel_hotplug_notify; + }
if (hdmi_parse_codec(codec) < 0) { codec->spec = NULL;