This commit allows this driver to support all of models which Yamaha produced with DM1000/BeBoB. They are: - GO44 - GO46
This commit adds Yamaha specific operations. To get source of clock, AV/C Audio Subunit command is used.
I note that their appearances are similar to some models of TerraTec; 'Go44' is similar to 'PHASE 24 FW' and 'GO46' is similar to 'PHASE X24 FW'. But their combination of Audio/Music subunit are a bit different.
Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp --- sound/firewire/Kconfig | 1 + sound/firewire/bebob/Makefile | 3 ++- sound/firewire/bebob/bebob.c | 5 ++++ sound/firewire/bebob/bebob.h | 1 + sound/firewire/bebob/bebob_yamaha.c | 50 +++++++++++++++++++++++++++++++++++++ 5 files changed, 59 insertions(+), 1 deletion(-) create mode 100644 sound/firewire/bebob/bebob_yamaha.c
diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig index 34615e5..d23bfa8 100644 --- a/sound/firewire/Kconfig +++ b/sound/firewire/Kconfig @@ -107,6 +107,7 @@ config SND_BEBOB * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW * Terratec EWS MIC2/EWS MIC4 * Terratec Aureon 7.1 Firewire + * Yamaha GO44/GO46
To compile this driver as a module, choose M here: the module will be called snd-bebob. diff --git a/sound/firewire/bebob/Makefile b/sound/firewire/bebob/Makefile index cb38dd1..c35eee1 100644 --- a/sound/firewire/bebob/Makefile +++ b/sound/firewire/bebob/Makefile @@ -1,3 +1,4 @@ snd-bebob-objs := bebob_command.o bebob_stream.o bebob_proc.o bebob_midi.o \ - bebob_pcm.o bebob_hwdep.o bebob_terratec.o bebob.o + bebob_pcm.o bebob_hwdep.o bebob_terratec.o bebob_yamaha.o \ + bebob.o obj-m += snd-bebob.o diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c index f0a4ecb..ad6a27e 100644 --- a/sound/firewire/bebob/bebob.c +++ b/sound/firewire/bebob/bebob.c @@ -53,6 +53,7 @@ static unsigned int devices_used; #define VEN_ICON 0x00001a9e #define VEN_PRISMSOUND 0x00001198 #define VEN_TERRATEC 0x00000aac +#define VEN_YAMAHA 0x0000a0de
static int name_device(struct snd_bebob *bebob, unsigned int vendor_id) @@ -296,6 +297,10 @@ static const struct ieee1394_device_id bebob_id_table[] = { SND_BEBOB_DEV_ENTRY(VEN_TERRATEC, 0x00000005, &spec_normal), /* Terratec Electronic GmbH, Aureon 7.1 Firewire */ SND_BEBOB_DEV_ENTRY(VEN_TERRATEC, 0x00000002, &spec_normal), + /* Yamaha, GO44 */ + SND_BEBOB_DEV_ENTRY(VEN_YAMAHA, 0x0010000b, &yamaha_go_spec), + /* YAMAHA, GO46 */ + SND_BEBOB_DEV_ENTRY(VEN_YAMAHA, 0x0010000c, &yamaha_go_spec), /* Ids are unknown but able to be supported */ /* Mackie, Digital X Bus x.200 */ /* Mackie, Digital X Bus x.400 */ diff --git a/sound/firewire/bebob/bebob.h b/sound/firewire/bebob/bebob.h index 1cb171b..a684f06 100644 --- a/sound/firewire/bebob/bebob.h +++ b/sound/firewire/bebob/bebob.h @@ -230,6 +230,7 @@ int snd_bebob_create_hwdep_device(struct snd_bebob *bebob); /* model specific operations */ extern struct snd_bebob_spec phase88_rack_spec; extern struct snd_bebob_spec phase24_series_spec; +extern struct snd_bebob_spec yamaha_go_spec;
#define SND_BEBOB_DEV_ENTRY(vendor, model, data) \ { \ diff --git a/sound/firewire/bebob/bebob_yamaha.c b/sound/firewire/bebob/bebob_yamaha.c new file mode 100644 index 0000000..f71af6b --- /dev/null +++ b/sound/firewire/bebob/bebob_yamaha.c @@ -0,0 +1,50 @@ +/* + * bebob_yamaha.c - a part of driver for BeBoB based devices + * + * Copyright (c) 2013 Takashi Sakamoto + * + * Licensed under the terms of the GNU General Public License, version 2. + */ + +#include "./bebob.h" + +/* + * NOTE: + * Yamaha GO44 is not designed to be used as stand-alone mixer. So any streams + * must be accompanied. If changing the state, a LED on the device starts to + * blink and its sync status is false. In this state, the device sounds nothing + * even if streaming. To start streaming at the current sampling rate is only + * way to revocer this state. GO46 is better for stand-alone mixer. + * + * Both of them have a capability to change its sampling rate up to 192.0kHz. + * At 192.0kHz, the device reports 4 PCM-in, 1 MIDI-in, 6 PCM-out, 1 MIDI-out. + * But Yamaha's driver reduce 2 PCM-in, 1 MIDI-in, 2 PCM-out, 1 MIDI-out to use + * 'Extended Stream Format Information Command - Single Request' in 'Additional + * AVC commands' defined by BridgeCo. + * This ALSA driver don't do this because a bit tiresome. Then isochronous + * streaming with many asynchronous transactions brings sounds with noises. + * Unfortunately current 'ffado-mixer' generated many asynchronous transaction + * to observe device's state, mainly check cmp connection and signal format. I + * reccomend users to close ffado-mixer at 192.0kHz if mixer is needless. + */ + +static char *clk_src_labels[] = {SND_BEBOB_CLOCK_INTERNAL, "SPDIF"}; +static int +clk_src_get(struct snd_bebob *bebob, unsigned int *id) +{ + return avc_audio_get_selector(bebob->unit, 0, 4, id); +} +static struct snd_bebob_clock_spec clock_spec = { + .num = ARRAY_SIZE(clk_src_labels), + .labels = clk_src_labels, + .get = &clk_src_get, +}; +static struct snd_bebob_rate_spec rate_spec = { + .get = &snd_bebob_stream_get_rate, + .set = &snd_bebob_stream_set_rate, +}; +struct snd_bebob_spec yamaha_go_spec = { + .clock = &clock_spec, + .rate = &rate_spec, + .meter = NULL +};