From: Derek Fang derek.fang@realtek.com
When the system plays a sound immediately after resuming from S3, it could hear a little pop from headphones. It is due to the HP was unmuted before the completion of jack re-detection finished in parallel.
This patch adds a lock to make sure the HP unmute after jack detect handler, and adds a few depop changes.
Signed-off-by: Derek Fang derek.fang@realtek.com --- sound/soc/codecs/rt5682s.c | 27 ++++++++++++++++++++------- sound/soc/codecs/rt5682s.h | 6 ++++++ 2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index 639a50fa95e2..9dd1796f3339 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -790,6 +790,7 @@ static int rt5682s_headset_detect(struct snd_soc_component *component, int jack_ snd_soc_component_update_bits(component, RT5682S_HP_CHARGE_PUMP_2, RT5682S_OSW_L_MASK | RT5682S_OSW_R_MASK, RT5682S_OSW_L_EN | RT5682S_OSW_R_EN); + usleep_range(35000, 40000); } else { rt5682s_sar_power_mode(component, SAR_PWR_OFF, 1); rt5682s_disable_push_button_irq(component); @@ -829,6 +830,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) while (!rt5682s->component->card->instantiated) usleep_range(10000, 15000);
+ mutex_lock(&rt5682s->jdet_mutex); mutex_lock(&rt5682s->calibrate_mutex);
val = snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) @@ -896,6 +898,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) cancel_delayed_work_sync(&rt5682s->jd_check_work);
mutex_unlock(&rt5682s->calibrate_mutex); + mutex_unlock(&rt5682s->jdet_mutex); }
static void rt5682s_jd_check_handler(struct work_struct *work) @@ -1318,34 +1321,41 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component);
switch (event) { - case SND_SOC_DAPM_PRE_PMU: + case SND_SOC_DAPM_POST_PMU: snd_soc_component_update_bits(component, RT5682S_DEPOP_1, RT5682S_OUT_HP_L_EN | RT5682S_OUT_HP_R_EN, RT5682S_OUT_HP_L_EN | RT5682S_OUT_HP_R_EN); + usleep_range(15000, 20000); snd_soc_component_update_bits(component, RT5682S_DEPOP_1, RT5682S_LDO_PUMP_EN | RT5682S_PUMP_EN | RT5682S_CAPLESS_L_EN | RT5682S_CAPLESS_R_EN, RT5682S_LDO_PUMP_EN | RT5682S_PUMP_EN | RT5682S_CAPLESS_L_EN | RT5682S_CAPLESS_R_EN); - break; - - case SND_SOC_DAPM_POST_PMU: - usleep_range(30000, 35000); snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_11, 0x6666); snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_12, 0xa82a); + + mutex_lock(&rt5682s->jdet_mutex); + snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2, RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK | RT5682S_HPO_SEL_IP_EN_SW, RT5682S_HPO_L_PATH_EN | RT5682S_HPO_R_PATH_EN | RT5682S_HPO_IP_EN_GATING); - snd_soc_component_write(component, RT5682S_HP_AMP_DET_CTL_1, 0x3050); + usleep_range(5000, 10000); + snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1, + RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_L | RT5682S_CP_SW_SIZE_S); + + mutex_unlock(&rt5682s->jdet_mutex); break;
case SND_SOC_DAPM_POST_PMD: snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2, RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK | RT5682S_HPO_SEL_IP_EN_SW, 0); + snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1, + RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_M); snd_soc_component_update_bits(component, RT5682S_DEPOP_1, RT5682S_LDO_PUMP_EN | RT5682S_PUMP_EN | RT5682S_CAPLESS_L_EN | RT5682S_CAPLESS_R_EN, 0); @@ -1734,7 +1744,7 @@ static const struct snd_soc_dapm_widget rt5682s_dapm_widgets[] = {
/* HPO */ SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5682s_hp_amp_event, - SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_POST_PMD | SND_SOC_DAPM_POST_PMU),
/* CLK DET */ SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682S_CLK_DET, @@ -3061,6 +3071,7 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c,
mutex_init(&rt5682s->calibrate_mutex); mutex_init(&rt5682s->sar_mutex); + mutex_init(&rt5682s->jdet_mutex); rt5682s_calibrate(rt5682s);
regmap_update_bits(rt5682s->regmap, RT5682S_MICBIAS_2, @@ -3072,6 +3083,8 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c, RT5682S_HP_SIG_SRC_MASK, RT5682S_HP_SIG_SRC_1BIT_CTL); regmap_update_bits(rt5682s->regmap, RT5682S_HP_CHARGE_PUMP_2, RT5682S_PM_HP_MASK, RT5682S_PM_HP_HV); + regmap_update_bits(rt5682s->regmap, RT5682S_HP_AMP_DET_CTL_1, + RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_M);
/* DMIC data pin */ switch (rt5682s->pdata.dmic1_data_pin) { diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 59ba4ea3b062..1bf2ef7ce578 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -1366,6 +1366,11 @@ #define RT5682S_SAR_SOUR_BTN (0x3f) #define RT5682S_SAR_SOUR_TYPE (0x0)
+/* Headphone Amp Detection Control 1 (0x3b00) */ +#define RT5682S_CP_SW_SIZE_MASK (0x7 << 4) +#define RT5682S_CP_SW_SIZE_L (0x4 << 4) +#define RT5682S_CP_SW_SIZE_M (0x2 << 4) +#define RT5682S_CP_SW_SIZE_S (0x1 << 4)
#define RT5682S_STEREO_RATES SNDRV_PCM_RATE_8000_192000 #define RT5682S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ @@ -1441,6 +1446,7 @@ struct rt5682s_priv { struct delayed_work jd_check_work; struct mutex calibrate_mutex; struct mutex sar_mutex; + struct mutex jdet_mutex;
#ifdef CONFIG_COMMON_CLK struct clk_hw dai_clks_hw[RT5682S_DAI_NUM_CLKS];