snd_soc_open() will trigger pm_runtime resume() which will then enable the regulator and initialization. So we should make sure the MCLK is enabled before this resume().
Previously we let the machine driver get the clock and enable it in its probe(). However, considering about power saving, it'll be better to enable it when it's going to be used and disable it after using.
So this patch just simply adds clk_get() and clk_enable() to WM8962 driver. Meanwhile, it marks clock pointer to NULL if no clock assigned to it so it will not break any current function.
Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com --- Changelog: v3 * Added return check for clk_prepare_enable() * Check error for clk_get() and return for deferred probe. v2 * Use wm8962->pdata.mclk instead.
include/sound/wm8962.h | 1 + sound/soc/codecs/wm8962.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+)
diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h index 79e6d42..0af7c16 100644 --- a/include/sound/wm8962.h +++ b/include/sound/wm8962.h @@ -37,6 +37,7 @@ #define WM8962_GPIO_FN_MICSCD 22
struct wm8962_pdata { + struct clk *mclk; int gpio_base; u32 gpio_init[WM8962_MAX_GPIO];
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index ca2fda9..eac29031 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/pm.h> #include <linux/gcd.h> @@ -3541,6 +3542,8 @@ static int wm8962_set_pdata_from_of(struct i2c_client *i2c, pdata->gpio_init[i] = 0x0; }
+ pdata->mclk = devm_clk_get(&i2c->dev, NULL); + return 0; }
@@ -3572,6 +3575,14 @@ static int wm8962_i2c_probe(struct i2c_client *i2c, return ret; }
+ /* Mark the mclk pointer to NULL if no mclk assigned */ + if (IS_ERR(wm8962->pdata.mclk)) { + /* But do not ignore the request for probe defer */ + if (PTR_ERR(wm8962->pdata.mclk) == -EPROBE_DEFER) + return -EPROBE_DEFER; + wm8962->pdata.mclk = NULL; + } + for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++) wm8962->supplies[i].supply = wm8962_supply_names[i];
@@ -3780,6 +3791,12 @@ static int wm8962_runtime_resume(struct device *dev) struct wm8962_priv *wm8962 = dev_get_drvdata(dev); int ret;
+ ret = clk_prepare_enable(wm8962->pdata.mclk); + if (ret) { + dev_err(dev, "Failed to enable MCLK: %d\n", ret); + return ret; + } + ret = regulator_bulk_enable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies); if (ret != 0) { @@ -3839,6 +3856,8 @@ static int wm8962_runtime_suspend(struct device *dev) regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies), wm8962->supplies);
+ clk_disable_unprepare(wm8962->pdata.mclk); + return 0; } #endif