There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone.
There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz.
So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode.
In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode.
Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- sound/soc/codecs/wm8960.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 9e621a254392..9c6af76a60fd 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -742,7 +742,7 @@ static int wm8960_configure_clocking(struct snd_soc_component *component) int i, j, k; int ret;
- if (!(iface1 & (1<<6))) { + if (!(iface1 & (1 << 6)) && !wm8960->sysclk) { dev_dbg(component->dev, "Codec is slave mode, no need to configure clock\n"); return 0;