On Mon, 28 Nov 2022 13:23:52 +0100, John Keeping wrote:
Tascam's Model 12 is a mixer which can also operate as a USB audio interface. The audio interface uses explicit feedback but it seems that it does not correctly handle missing isochronous frames.
When injecting an xrun (or doing anything else that pauses the playback stream) the feedback rate climbs (for example, at 44,100Hz nominal, I see a stable rate around 44,099 but xrun injection sees this peak at around 44,135 in most cases) and glitches are heard in the audio stream for several seconds - this is significantly worse than the single glitch expected for an underrun.
While the stream does normally recover and the feedback rate returns to a stable value, I have seen some occurrences where this does not happen and the rate continues to increase while no audio is heard from the output. I have not found a solid reproduction for this.
This misbehaviour can be avoided by totally resetting the stream state by switching the interface to alt 0 and back before restarting the playback stream.
Add a new quirk flag which forces the endpoint and interface to be reconfigured whenever the stream is stopped, and use this for the Tascam Model 12.
Signed-off-by: John Keeping john@metanate.com
Thanks for the patch, it's an interesting case. About the code change:
--- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -1673,6 +1673,13 @@ void snd_usb_endpoint_stop(struct snd_usb_endpoint *ep, bool keep_pending) stop_urbs(ep, false, keep_pending); if (ep->clock_ref) atomic_dec(&ep->clock_ref->locked);
if (ep->chip->quirk_flags & QUIRK_FLAG_FORCE_IFACE_RESET &&usb_pipeout(ep->pipe)) {ep->need_setup = true;if (ep->iface_ref)ep->iface_ref->need_setup = true;}
Is this the forced reset always safe? Imagine that you have individual playback and capture streams, and what if only one of them gets stopped and restarted while another keeps running?
thanks,
Takashi