Hi all,
I'm re-submitting this as I didn't get a response on it for about two weeks. Please see the old thread called "Patch for Digidesign Mbox 2 (set sample rate)" for prior discussion on it. Let me know if you need anything else from me to get this applied.
Cheers, Vik
diff -ur linux-source-4.11-orig/sound/usb/quirks.c linux-source-4.11/sound/usb/quirks.c --- linux-source-4.11-orig/sound/usb/quirks.c 2017-06-17 05:47:27.000000000 +0100 +++ linux-source-4.11/sound/usb/quirks.c 2017-07-18 22:37:58.522858262 +0100 @@ -768,23 +768,32 @@
static void mbox2_setup_48_24_magic(struct usb_device *dev) { - u8 srate[3]; - u8 temp[12]; - /* Choose 48000Hz permanently */ - srate[0] = 0x80; - srate[1] = 0xbb; - srate[2] = 0x00; + u8 srate[3] = { 0x80, 0xbb, 0x00 }; + u8 temp[3]; + int err;
/* Send the magic! */ - snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), - 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003); - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003); - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003); - snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), - 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003); + if ((err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_SET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, 0x0085, &temp, sizeof(temp))) < 0) + dev_err(&dev->dev, "mbox2: magic setup step #1 failed\n"); + + if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_GET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, 0x0085, &srate, sizeof(srate))) < 0) + dev_err(&dev->dev, "mbox2: magic setup step #2 failed\n"); + + if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_GET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, 0x0086, &srate, sizeof(srate))) < 0) + dev_err(&dev->dev, "mbox2: magic setup step #3 failed\n"); + + if ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_GET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_IN, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, 0x0003, &srate, sizeof(srate))) < 0) + dev_err(&dev->dev, "mbox2: magic setup step #4 failed\n"); + return; }
@@ -815,16 +824,16 @@
count = 0; bootresponse[0] = MBOX2_BOOT_LOADING; - while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) { - msleep(500); /* 0.5 second delay */ + do { snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), /* Control magic - load onboard firmware */ - 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012); + UAC_GET_MEM, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0x0001, 0x0000, &bootresponse, sizeof(bootresponse)); if (bootresponse[0] == MBOX2_BOOT_READY) break; + msleep(500); /* 0.5 second delay */ dev_dbg(&dev->dev, "device not ready, resending boot sequence...\n"); count++; - } + } while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10));
if (bootresponse[0] != MBOX2_BOOT_READY) { dev_err(&dev->dev, "Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]); @@ -847,7 +856,7 @@
mbox2_setup_48_24_magic(dev);
- dev_info(&dev->dev, "Digidesign Mbox 2: 24bit 48kHz"); + dev_info(&dev->dev, "Digidesign Mbox 2 configured");
return 0; /* Successful boot */ } @@ -1111,6 +1120,26 @@ subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0; }
+static void set_format_mbox2_quirk(struct snd_usb_substream *subs, + struct audioformat *fmt) +{ + struct usb_device *dev = subs->dev; + u8 srate[3]; + int err; + + srate[0] = subs->cur_rate; + srate[1] = subs->cur_rate >> 8; + srate[2] = subs->cur_rate >> 16; + + /* Set the sample rate for endpoint IN 5 (0x0085) until we succeed */ + while ((err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), UAC_SET_CUR, + USB_TYPE_CLASS | USB_RECIP_ENDPOINT | USB_DIR_OUT, + UAC_EP_CS_ATTR_SAMPLE_RATE << 8, 0x0085, srate, sizeof(srate))) < 0) + dev_err(&dev->dev, "mbox2: set sample rate failed, retrying\n"); + + dev_info(&subs->dev->dev, "mbox2: set sample rate to %dHz\n", subs->cur_rate); +} + void snd_usb_set_format_quirk(struct snd_usb_substream *subs, struct audioformat *fmt) { @@ -1121,6 +1150,9 @@ case USB_ID(0x041e, 0x3f19): /* E-Mu 0204 USB */ set_format_emu_quirk(subs, fmt); break; + case USB_ID(0x0dba, 0x3000): /* Digidesign Mbox 2 */ + set_format_mbox2_quirk(subs, fmt); + break; } }
diff -ur linux-source-4.11-orig/sound/usb/quirks-table.h linux-source-4.11/sound/usb/quirks-table.h --- linux-source-4.11-orig/sound/usb/quirks-table.h 2017-06-17 05:47:27.000000000 +0100 +++ linux-source-4.11/sound/usb/quirks-table.h 2017-07-18 17:33:57.620424012 +0100 @@ -3020,12 +3020,13 @@ .attributes = 0x00, .endpoint = 0x03, .ep_attr = USB_ENDPOINT_SYNC_ASYNC, - .rates = SNDRV_PCM_RATE_48000, - .rate_min = 48000, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000, + .rate_min = 44100, .rate_max = 48000, - .nr_rates = 1, + .nr_rates = 2, .rate_table = (unsigned int[]) { - 48000 + 44100, 48000 } } }, @@ -3045,12 +3046,13 @@ .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE, .endpoint = 0x85, .ep_attr = USB_ENDPOINT_SYNC_SYNC, - .rates = SNDRV_PCM_RATE_48000, - .rate_min = 48000, + .rates = SNDRV_PCM_RATE_44100| + SNDRV_PCM_RATE_48000, + .rate_min = 44100, .rate_max = 48000, - .nr_rates = 1, + .nr_rates = 2, .rate_table = (unsigned int[]) { - 48000 + 44100, 48000 } } },