On Mon, 2008-01-14 at 02:06 +0800, De Fuuss wrote:
Following your advice, I tested per channel output. Using either 6stack-dig or 6stack-hp, I get noise from Front Left and Right jacks, using speaker-test (X=1 and 2) but not on any other channels.
Hi, Did you mean that after you changed the 'Jumper', you could get the sound from the Front jack on the back channel?
Patrick
Date: Sun, 13 Jan 2008 01:01:50 -0200 From: cmatsuoka@gmail.com To: fuuss@hotmail.com CC: zhe.jiang@intel.com; alsa-devel@alsa-project.org Subject: Re: [alsa-devel] intel-hd on an intel G33 motherboard
2008/1/12 De Fuuss :
I get the uneasy feeling that something is messed up with this
board. Anyway, for completeness' sake, I attached the results of amixer contents, cat /proc/asound/card0/codec#0 and dmesg for the module loaded as 6stack-dig. I have to try 6stack-hp again to confirm if I get something there.
I fixed the Inspiron output, and I'm adding the SG33G5M codec to the codecgraph codecs collection (git repository at http://helllabs.org/git/codecgraph.git). If nodes 0x14, 0x15, 0x16
and
0x17 are the front, rear, clfe and side connectors in the back
panel,
6stack-hp should work (at least for the outputs). You can test the outputs using "speaker-test -Dplug:surround71 -c8 -sX" (where X
varies
from 1 to 8) and a pair of headphones. _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel