This patch is to use saradc to check the jack type when auto detection is still failure.
Signed-off-by: David Lin CTLIN0@nuvoton.com --- sound/soc/codecs/nau8825.c | 128 ++++++++++++++++++++++++++++++++++++- sound/soc/codecs/nau8825.h | 23 +++++++ 2 files changed, 148 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index ba7f5ec28609..4bffa9c20f2b 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1736,6 +1736,121 @@ static int nau8825_button_decode(int value) return buttons; }
+static int nau8825_high_imped_detection(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + struct snd_soc_dapm_context *dapm = nau8825->dapm; + unsigned int adc_mg1, adc_mg2; + + /* Initial phase */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R | + NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2); + regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_1, + NAU8825_TESTDACIN_MASK, NAU8825_TESTDACIN_GND); + regmap_write(regmap, NAU8825_REG_TRIM_SETTINGS, 0x6); + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_LOWNOISE_MASK | NAU8825_MICBIAS_VOLTAGE_MASK, + NAU8825_MICBIAS_LOWNOISE_EN); + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK | NAU8825_SAR_TRACKING_GAIN_MASK | + NAU8825_SAR_HV_SEL_MASK | NAU8825_SAR_RES_SEL_MASK | + NAU8825_SAR_COMPARE_TIME_MASK | NAU8825_SAR_SAMPLING_TIME_MASK, + NAU8825_SAR_HV_SEL_VDDMIC | NAU8825_SAR_RES_SEL_70K); + + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); + snd_soc_dapm_sync(dapm); + + /* Configure settings for first reading of SARADC */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R | + NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND2); + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKR2); + regmap_read(regmap, NAU8825_REG_SARDOUT_RAM_STATUS, &adc_mg1); + + /* Configure settings for second reading of SARADC */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0); + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R | + NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R | + NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1); + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKSLV); + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, NAU8825_SAR_INPUT_JKSLV); + regmap_read(regmap, NAU8825_REG_SARDOUT_RAM_STATUS, &adc_mg2); + + /* Disable phase */ + snd_soc_dapm_disable_pin(dapm, "SAR"); + snd_soc_dapm_disable_pin(dapm, "MICBIAS"); + snd_soc_dapm_sync(dapm); + + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_LOWNOISE_MASK | + NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage); + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | NAU8825_SPKR_DWN1R | + NAU8825_SPKR_DWN1L, NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2 | + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_1, + NAU8825_TESTDACIN_MASK, NAU8825_TESTDACIN_GND); + regmap_write(regmap, NAU8825_REG_TRIM_SETTINGS, 0); + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_TRACKING_GAIN_MASK | NAU8825_SAR_HV_SEL_MASK, + nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT); + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_COMPARE_TIME_MASK | NAU8825_SAR_SAMPLING_TIME_MASK, + (nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT) | + (nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT)); + dev_dbg(nau8825->dev, "adc_mg1:%x, adc_mg2:%x\n", adc_mg1, adc_mg2); + + /* Confirmation phase */ + if (adc_mg1 > adc_mg2) { + dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n"); + + /* Unground MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2, + NAU8825_SPKR_ENGND2); + /* Attach 2kOhm Resistor from MICBIAS to MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKR2); + /* Attach SARADC to MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, + NAU8825_SAR_INPUT_JKR2); + } else if (adc_mg1 < adc_mg2) { + dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n"); + + /* Unground MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_ENGND1 | NAU8825_SPKR_ENGND2, + NAU8825_SPKR_ENGND1); + /* Attach 2kOhm Resistor from MICBIAS to MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKSLV); + /* Attach SARADC to MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, + NAU8825_SAR_INPUT_JKSLV); + } else { + dev_err(nau8825->dev, "Jack broken.\n"); + return -EINVAL; + } + + return 0; +} + static int nau8825_jack_insert(struct nau8825 *nau8825) { struct regmap *regmap = nau8825->regmap; @@ -1797,9 +1912,16 @@ static int nau8825_jack_insert(struct nau8825 *nau8825) snd_soc_dapm_sync(dapm); break; case 3: - /* detect error case */ - dev_err(nau8825->dev, "detection error; disable mic function\n"); - type = SND_JACK_HEADPHONE; + /* Detection failure case */ + dev_warn(nau8825->dev, + "Detection failure. Try the manually mechanism for jack type checking.\n"); + if (!nau8825_high_imped_detection(nau8825)) { + type = SND_JACK_HEADSET; + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); + snd_soc_dapm_sync(dapm); + } else + type = SND_JACK_HEADPHONE; break; }
diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index d84191a7beb2..0c3a446e0e1a 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -155,6 +155,8 @@ /* HSD_CTRL (0xc) */ #define NAU8825_HSD_AUTO_MODE (1 << 6) /* 0 - open, 1 - short to GND */ +#define NAU8825_SPKR_ENGND1 (1 << 3) +#define NAU8825_SPKR_ENGND2 (1 << 2) #define NAU8825_SPKR_DWN1R (1 << 1) #define NAU8825_SPKR_DWN1L (1 << 0)
@@ -207,6 +209,17 @@ #define NAU8825_SAR_INPUT_JKR2 (0 << 11) #define NAU8825_SAR_TRACKING_GAIN_SFT 8 #define NAU8825_SAR_TRACKING_GAIN_MASK (0x7 << NAU8825_SAR_TRACKING_GAIN_SFT) +#define NAU8825_SAR_HV_SEL_SFT 7 +#define NAU8825_SAR_HV_SEL_MASK (1 << NAU8825_SAR_HV_SEL_SFT) +#define NAU8825_SAR_HV_SEL_MICBIAS (0 << NAU8825_SAR_HV_SEL_SFT) +#define NAU8825_SAR_HV_SEL_VDDMIC (1 << NAU8825_SAR_HV_SEL_SFT) +#define NAU8825_SAR_RES_SEL_SFT 4 +#define NAU8825_SAR_RES_SEL_MASK (0x7 << NAU8825_SAR_RES_SEL_SFT) +#define NAU8825_SAR_RES_SEL_35K (0 << NAU8825_SAR_RES_SEL_SFT) +#define NAU8825_SAR_RES_SEL_70K (1 << NAU8825_SAR_RES_SEL_SFT) +#define NAU8825_SAR_RES_SEL_170K (2 << NAU8825_SAR_RES_SEL_SFT) +#define NAU8825_SAR_RES_SEL_360K (3 << NAU8825_SAR_RES_SEL_SFT) +#define NAU8825_SAR_RES_SEL_SHORTED (4 << NAU8825_SAR_RES_SEL_SFT) #define NAU8825_SAR_COMPARE_TIME_SFT 2 #define NAU8825_SAR_COMPARE_TIME_MASK (3 << 2) #define NAU8825_SAR_SAMPLING_TIME_SFT 0 @@ -385,6 +398,13 @@ #define NAU8825_BIAS_VMID_SEL_SFT 4 #define NAU8825_BIAS_VMID_SEL_MASK (3 << NAU8825_BIAS_VMID_SEL_SFT)
+/* ANALOG_CONTROL_1 (0x69) */ +#define NAU8825_TESTDACIN_SFT 14 +#define NAU8825_TESTDACIN_MASK (0x3 << NAU8825_TESTDACIN_SFT) +#define NAU8825_TESTDACIN_HIGH (1 << NAU8825_TESTDACIN_SFT) +#define NAU8825_TESTDACIN_LOW (2 << NAU8825_TESTDACIN_SFT) +#define NAU8825_TESTDACIN_GND (3 << NAU8825_TESTDACIN_SFT) + /* ANALOG_CONTROL_2 (0x6a) */ #define NAU8825_HP_NON_CLASSG_CURRENT_2xADJ (1 << 12) #define NAU8825_DAC_CAPACITOR_MSB (1 << 1) @@ -412,6 +432,9 @@ /* MIC_BIAS (0x74) */ #define NAU8825_MICBIAS_JKSLV (1 << 14) #define NAU8825_MICBIAS_JKR2 (1 << 12) +#define NAU8825_MICBIAS_LOWNOISE_SFT 10 +#define NAU8825_MICBIAS_LOWNOISE_MASK (0x1 << NAU8825_MICBIAS_LOWNOISE_SFT) +#define NAU8825_MICBIAS_LOWNOISE_EN (0x1 << NAU8825_MICBIAS_LOWNOISE_SFT) #define NAU8825_MICBIAS_POWERUP_SFT 8 #define NAU8825_MICBIAS_VOLTAGE_SFT 0 #define NAU8825_MICBIAS_VOLTAGE_MASK 0x7