On Wed, Mar 02, 2016 at 11:02:15AM +0900, Mark Brown wrote:
On Tue, Feb 16, 2016 at 09:47:47PM +0530, Jeeja KP wrote:
We have no mechanism to configure hw_params for DAIs which are hostless. Like a loop or DAIs connected to internal sinks/sources.
Please propose patches, don't send enormous design documents. They're big, take a long time to read and don't really get us anywhere unless they're extremely clear.
Ok. I have the patches ready, will post it.
Approach:
- Allow params to be defined for other BE dai link also. this
currently applicable only for codec_codec link.
Like I keep saying if you're thinking about this in terms of DPCM you're solving the wrong problem - we already support supplying parameters for device<->device links, we already have systems that need to configure things for device<->device links so we can already see that if we're doing something that only works for things that are on SoC and can use DPCM then we're not solving the problem.
No this is not exactly about DPCM. It is about the device<->device links that assume you can have only codecs as hostless and thus change the direction for the link. Since we are rendering from SoC we don't need direction change.
DPCM works pretty well for small, simple DSPs that are mostly in line in the middle of a standard DAI but it does have limitations which you're now running into. Your systems don't fit well with what DPCM supports naturally.
struct snd_soc_dai_link { const struct snd_soc_pcm_stream *params; unsigned int num_params;
/* flag to create codec codec based on the flag*/unsigned int codec_link:1;This is clearly confused, if we can't figure out what the two devices we are connecting are based on just looking at the devices then that's really not a good sign that our interfaces are sensible and easy to work with.
Right now dai_link assumes device<->device links based on params so we cannot specify params for anything where we dont want direction change and would like to treat as normal direction dai_link. So we propose this to move to codec_link flag and use params only for creating controls based on params provided.
--