From: James Gardiner renidragsemaj@yahoo.com
Signed-off-by: James Gardiner renidragsemaj@yahoo.com
diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c index 917bc5d..27bc568 100644 --- a/pci/hda/patch_sigmatel.c +++ b/pci/hda/patch_sigmatel.c @@ -100,6 +100,7 @@ enum { STAC_HP_M4, STAC_HP_DV5, STAC_HP_HDX, + STAC_HP_DV4_1222NR, STAC_92HD71BXX_MODELS };
@@ -1836,6 +1837,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = { [STAC_HP_M4] = NULL, [STAC_HP_DV5] = NULL, [STAC_HP_HDX] = NULL, + [STAC_HP_DV4_1222NR] = NULL, };
static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = { @@ -1847,6 +1849,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = { [STAC_HP_M4] = "hp-m4", [STAC_HP_DV5] = "hp-dv5", [STAC_HP_HDX] = "hp-hdx", + [STAC_HP_DV4_1222NR] = "hp-dv4-1222nr", };
static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { @@ -1855,6 +1858,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_DFI, 0x3101, "DFI LanParty", STAC_92HD71BXX_REF), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, + "HP dv4-1222nr", STAC_HP_DV4_1222NR), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080, "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, @@ -4520,27 +4525,38 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; }
- /* - * using power check for controlling mute led of HP HDX notebooks + * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) * * For this feature CONFIG_SND_HDA_POWER_SAVE is needed, otherwise * the LED is NOT working properly ! + * + * Changed name to reflect that it now works for any designated + * model, not just HP HDX. */
#ifdef CONFIG_SND_HDA_POWER_SAVE -static int stac92xx_hp_hdx_check_power_status(struct hda_codec *codec, +static int stac92xx_hp_check_power_status(struct hda_codec *codec, hda_nid_t nid) { struct sigmatel_spec *spec = codec->spec; + unsigned int gpio_bit = 0; /* gets rid of compiler warning */ + + switch (spec->board_config) { + case STAC_HP_DV4_1222NR: + gpio_bit = 0x01; + break; + case STAC_HP_HDX: + gpio_bit = 0x08; + }
if (nid == 0x10) { if (snd_hda_codec_amp_read(codec, nid, 0, HDA_OUTPUT, 0) & HDA_AMP_MUTE) - spec->gpio_data &= ~0x08; /* orange */ + spec->gpio_data &= ~gpio_bit; /* orange */ else - spec->gpio_data |= 0x08; /* white */ + spec->gpio_data |= gpio_bit; /* white */
stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, @@ -5219,6 +5235,22 @@ again: spec->num_smuxes = 0; spec->num_dmuxes = 1; break; + case STAC_HP_DV4_1222NR: + spec->num_dmics = 1; + /* I don't know if it needs 1 or 2 smuxes - will wait for + * bug reports to fix if needed + */ + spec->num_smuxes = 1; + spec->num_dmuxes = 1; +#ifdef CONFIG_SND_HDA_POWER_SAVE + /* This controls MUTE LED */ + spec->gpio_mask |= 0x01; + spec->gpio_dir |= 0x01; + spec->gpio_data |= 0x01; + codec->patch_ops.check_power_status = + stac92xx_hp_check_power_status; +#endif + /* fallthrough */ case STAC_HP_DV5: snd_hda_codec_set_pincfg(codec, 0x0d, 0x90170010); stac92xx_auto_set_pinctl(codec, 0x0d, AC_PINCTL_OUT_EN); @@ -5239,7 +5271,7 @@ again:
/* register check_power_status callback. */ codec->patch_ops.check_power_status = - stac92xx_hp_hdx_check_power_status; + stac92xx_hp_check_power_status; #endif break; };