Currently register read-back for the ad193x is broken, because it expects bit 0 of the upper byte to be set to indicate a read operation, while the regmap default for SPI is to use bit 7.
This patch also addresses another oddity of the device. There are SPI and I2C versions of this codec. In both cases the registers are 8-bit wide and numbered from 0x0 to 0x10, but in the SPI case there is also a so called 'global address' which is prefixed in-front of the register address. The global address mimics I2C behaviour and includes a static device address the and the read/write flag. This basically extends the register address to an 16-bit value numbered from 0x800 to 0x810. These are the register numbers which are currently used by the driver. This works, because I2C will ignore the upper 8 bits of the register, but it is still a bit confusing, as there are no such register numbers in the I2C case.
The approach taken by this patch is to number the registers from 0x00 to 0x10 and encode the global address for SPI mode into the read and write flag masks.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de
--- This patch depends on the two previous patches, while the first one depends on regmap/for-next and the second on asoc/for-next, so maybe to avoid having to pull in regmap/for-next into asoc/for-next we should wait with applying this patch until the merge window.
Scott, it would be nice if you could test these changes since I don't have a ad1936 board here right now. But I compared the generated SPI signals with what is in 3.1 and they look identical, so it should work.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/ad193x.c | 24 ++++++++++++++++++++---- sound/soc/codecs/ad193x.h | 34 +++++++++++++++++----------------- 2 files changed, 37 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c index eedb6f5..fc03705 100644 --- a/sound/soc/codecs/ad193x.c +++ b/sound/soc/codecs/ad193x.c @@ -347,12 +347,28 @@ static int ad193x_probe(struct snd_soc_codec *codec) { struct ad193x_priv *ad193x = snd_soc_codec_get_drvdata(codec); struct snd_soc_dapm_context *dapm = &codec->dapm; + struct regmap_config config; int ret;
- if (ad193x->control_type == SND_SOC_I2C) - ret = snd_soc_codec_set_cache_io(codec, 8, 8, ad193x->control_type); - else - ret = snd_soc_codec_set_cache_io(codec, 16, 8, ad193x->control_type); + memset(&config, 0, sizeof(config)); + + config.val_bits = 8; + + switch (ad193x->control_type) { + case SND_SOC_I2C: + config.reg_bits = 8; + break; + case SND_SOC_SPI: + config.reg_bits = 16; + config.read_flag_mask = 0x09; + config.write_flag_mask = 0x08; + break; + default: + BUG(); + return -EINVAL; + } + + ret = snd_soc_codec_regmap_init(codec, &config, ad193x->control_type); if (ret < 0) { dev_err(codec->dev, "failed to set cache I/O: %d\n", ret); return ret; diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h index cccc2e8..536e5f2 100644 --- a/sound/soc/codecs/ad193x.h +++ b/sound/soc/codecs/ad193x.h @@ -9,20 +9,20 @@ #ifndef __AD193X_H__ #define __AD193X_H__
-#define AD193X_PLL_CLK_CTRL0 0x800 +#define AD193X_PLL_CLK_CTRL0 0x00 #define AD193X_PLL_POWERDOWN 0x01 #define AD193X_PLL_INPUT_MASK (~0x6) #define AD193X_PLL_INPUT_256 (0 << 1) #define AD193X_PLL_INPUT_384 (1 << 1) #define AD193X_PLL_INPUT_512 (2 << 1) #define AD193X_PLL_INPUT_768 (3 << 1) -#define AD193X_PLL_CLK_CTRL1 0x801 -#define AD193X_DAC_CTRL0 0x802 +#define AD193X_PLL_CLK_CTRL1 0x01 +#define AD193X_DAC_CTRL0 0x02 #define AD193X_DAC_POWERDOWN 0x01 #define AD193X_DAC_SERFMT_MASK 0xC0 #define AD193X_DAC_SERFMT_STEREO (0 << 6) #define AD193X_DAC_SERFMT_TDM (1 << 6) -#define AD193X_DAC_CTRL1 0x803 +#define AD193X_DAC_CTRL1 0x03 #define AD193X_DAC_2_CHANNELS 0 #define AD193X_DAC_4_CHANNELS 1 #define AD193X_DAC_8_CHANNELS 2 @@ -33,11 +33,11 @@ #define AD193X_DAC_BCLK_MASTER (1 << 5) #define AD193X_DAC_LEFT_HIGH (1 << 3) #define AD193X_DAC_BCLK_INV (1 << 7) -#define AD193X_DAC_CTRL2 0x804 +#define AD193X_DAC_CTRL2 0x04 #define AD193X_DAC_WORD_LEN_SHFT 3 #define AD193X_DAC_WORD_LEN_MASK 0x18 #define AD193X_DAC_MASTER_MUTE 1 -#define AD193X_DAC_CHNL_MUTE 0x805 +#define AD193X_DAC_CHNL_MUTE 0x05 #define AD193X_DACL1_MUTE 0 #define AD193X_DACR1_MUTE 1 #define AD193X_DACL2_MUTE 2 @@ -46,28 +46,28 @@ #define AD193X_DACR3_MUTE 5 #define AD193X_DACL4_MUTE 6 #define AD193X_DACR4_MUTE 7 -#define AD193X_DAC_L1_VOL 0x806 -#define AD193X_DAC_R1_VOL 0x807 -#define AD193X_DAC_L2_VOL 0x808 -#define AD193X_DAC_R2_VOL 0x809 -#define AD193X_DAC_L3_VOL 0x80a -#define AD193X_DAC_R3_VOL 0x80b -#define AD193X_DAC_L4_VOL 0x80c -#define AD193X_DAC_R4_VOL 0x80d -#define AD193X_ADC_CTRL0 0x80e +#define AD193X_DAC_L1_VOL 0x06 +#define AD193X_DAC_R1_VOL 0x07 +#define AD193X_DAC_L2_VOL 0x08 +#define AD193X_DAC_R2_VOL 0x09 +#define AD193X_DAC_L3_VOL 0x0a +#define AD193X_DAC_R3_VOL 0x0b +#define AD193X_DAC_L4_VOL 0x0c +#define AD193X_DAC_R4_VOL 0x0d +#define AD193X_ADC_CTRL0 0x0e #define AD193X_ADC_POWERDOWN 0x01 #define AD193X_ADC_HIGHPASS_FILTER 1 #define AD193X_ADCL1_MUTE 2 #define AD193X_ADCR1_MUTE 3 #define AD193X_ADCL2_MUTE 4 #define AD193X_ADCR2_MUTE 5 -#define AD193X_ADC_CTRL1 0x80f +#define AD193X_ADC_CTRL1 0x0f #define AD193X_ADC_SERFMT_MASK 0x60 #define AD193X_ADC_SERFMT_STEREO (0 << 5) #define AD193X_ADC_SERFMT_TDM (1 << 5) #define AD193X_ADC_SERFMT_AUX (2 << 5) #define AD193X_ADC_WORD_LEN_MASK 0x3 -#define AD193X_ADC_CTRL2 0x810 +#define AD193X_ADC_CTRL2 0x10 #define AD193X_ADC_2_CHANNELS 0 #define AD193X_ADC_4_CHANNELS 1 #define AD193X_ADC_8_CHANNELS 2