Simplify dma DT property handling. fsl,ssi-dma-events is not used anymore. It passes invalid data to imx_pcm_dma_params_init_data() which copies some data into an imx dma struct. This struct is never used in imx-dma or imx-sdma because of generic OF DMA handling. The "fsl,ssi-dma-events" is not used anywhere in dts files.
Signed-off-by: Markus Pargmann mpa@pengutronix.de --- sound/soc/fsl/fsl_ssi.c | 40 +++------------------------------------- 1 file changed, 3 insertions(+), 37 deletions(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 054813d..43d4342 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -157,8 +157,6 @@ struct fsl_ssi_private { struct clk *clk; struct snd_dmaengine_dai_dma_data dma_params_tx; struct snd_dmaengine_dai_dma_data dma_params_rx; - struct imx_dma_data filter_data_tx; - struct imx_dma_data filter_data_rx; struct imx_pcm_fiq_params fiq_params; /* Register values for rx/tx configuration */ struct fsl_ssi_rxtx_reg_val rxtx_reg_val; @@ -977,8 +975,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, struct fsl_ssi_private *ssi_private) { struct device_node *np = pdev->dev.of_node; - u32 dma_events[2], dmas[4]; - bool shared; + u32 dmas[4]; int ret;
ssi_private->clk = devm_clk_get(&pdev->dev, NULL); @@ -1012,26 +1009,9 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, ssi_private->dma_params_rx.maxburst = ssi_private->fifo_depth - 2; ssi_private->dma_params_tx.addr = ssi_private->ssi_phys + CCSR_SSI_STX0; ssi_private->dma_params_rx.addr = ssi_private->ssi_phys + CCSR_SSI_SRX0; - ssi_private->dma_params_tx.filter_data = &ssi_private->filter_data_tx; - ssi_private->dma_params_rx.filter_data = &ssi_private->filter_data_rx;
- if (!of_property_read_bool(pdev->dev.of_node, "dmas") && - ssi_private->use_dma) { - /* - * FIXME: This is a temporary solution until all - * necessary dma drivers support the generic dma - * bindings. - */ - ret = of_property_read_u32_array(pdev->dev.of_node, - "fsl,ssi-dma-events", dma_events, 2); - if (ret && ssi_private->use_dma) { - dev_err(&pdev->dev, "could not get dma events but fsl-ssi is configured to use DMA\n"); - goto error_dma_events; - } - } - /* Should this be merge with the above? */ - if (!of_property_read_u32_array(pdev->dev.of_node, "dmas", dmas, 4) - && dmas[2] == IMX_DMATYPE_SSI_DUAL) { + ret = !of_property_read_u32_array(np, "dmas", dmas, 4); + if (ssi_private->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL) { ssi_private->use_dual_fifo = true; /* When using dual fifo mode, we need to keep watermark * as even numbers due to dma script limitation. @@ -1040,21 +1020,7 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev, ssi_private->dma_params_rx.maxburst &= ~0x1; }
- shared = of_device_is_compatible(of_get_parent(np), "fsl,spba-bus"); - - imx_pcm_dma_params_init_data(&ssi_private->filter_data_tx, - dma_events[0], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI); - imx_pcm_dma_params_init_data(&ssi_private->filter_data_rx, - dma_events[1], shared ? IMX_DMATYPE_SSI_SP : IMX_DMATYPE_SSI); - return 0; - -error_dma_events: - if (!IS_ERR(ssi_private->baudclk)) - clk_disable_unprepare(ssi_private->baudclk); - clk_disable_unprepare(ssi_private->clk); - - return ret; }
static void fsl_ssi_imx_clean(struct platform_device *pdev,