If den=1 and pllin_rate>20MHz then den and num are adjusted to 0 causing a divide by zero error a few lines further on. Therefore this patch correctly scales num and den such that pllin_rate/den < 20MHz as required in the device data sheet.
Signed-off-by: Howard Mitchell hm@hmbedded.co.uk --- sound/soc/codecs/pcm512x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/pcm512x.c b/sound/soc/codecs/pcm512x.c index 5301c4a..8472099 100644 --- a/sound/soc/codecs/pcm512x.c +++ b/sound/soc/codecs/pcm512x.c @@ -713,8 +713,8 @@ static int pcm512x_find_pll_coeff(struct snd_soc_dai *dai,
/* pllin_rate / P (or here, den) cannot be greater than 20 MHz */ if (pllin_rate / den > 20000000 && num < 8) { - num *= 20000000 / (pllin_rate / den); - den *= 20000000 / (pllin_rate / den); + num *= DIV_ROUND_UP(pllin_rate / den, 20000000); + den *= DIV_ROUND_UP(pllin_rate / den, 20000000); } dev_dbg(dev, "num / den = %lu / %lu\n", num, den);