The WM8960 is a low power, high quality stereo codec designed for portable digital audio applications.
Stereo class D speaker drivers provide 1W per channel into 8W loads. Guaranteed low leakage, excellent PSRR and pop/click suppression mechanisms enable direct battery connection for the speaker supply.
The device also integrates a complete microphone interface and a stereo headphone driver. External component requirements are drastically reduced as no separate microphone, speaker or headphone amplifiers are required. Advanced on-chip digital signal processing performs automatic level control for the microphone or line input.
Stereo 24-bit sigma-delta ADCs and DACs are used with low power over-sampling digital interpolation and decimation filters and a flexible digital audio interface.
The master clock can be input directly or generated internally by an onboard PLL, supporting most commonly-used clocking schemes.
This driver was originally written by Liam Girdwood, with substantial subsequent additions and updates for feature completeness and changes in the ASoC framework from me.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wm8960.c | 969 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/wm8960.h | 127 ++++++ 4 files changed, 1102 insertions(+), 0 deletions(-) create mode 100644 sound/soc/codecs/wm8960.c create mode 100644 sound/soc/codecs/wm8960.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index ab36485..121d63f 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -35,6 +35,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8900 if I2C select SND_SOC_WM8903 if I2C + select SND_SOC_WM8960 if I2C select SND_SOC_WM8971 if I2C select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI select SND_SOC_WM8990 if I2C @@ -139,6 +140,9 @@ config SND_SOC_WM8900 config SND_SOC_WM8903 tristate
+config SND_SOC_WM8960 + tristate + config SND_SOC_WM8971 tristate
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index a72548d..d8e15a4 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -23,6 +23,7 @@ snd-soc-wm8750-objs := wm8750.o snd-soc-wm8753-objs := wm8753.o snd-soc-wm8900-objs := wm8900.o snd-soc-wm8903-objs := wm8903.o +snd-soc-wm8960-objs := wm8960.o snd-soc-wm8971-objs := wm8971.o snd-soc-wm8988-objs := wm8988.o snd-soc-wm8990-objs := wm8990.o @@ -56,6 +57,7 @@ obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o +obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o obj-$(CONFIG_SND_SOC_WM8988) += snd-soc-wm8988.o obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c new file mode 100644 index 0000000..e224d8a --- /dev/null +++ b/sound/soc/codecs/wm8960.c @@ -0,0 +1,969 @@ +/* + * wm8960.c -- WM8960 ALSA SoC Audio driver + * + * Author: Liam Girdwood + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "wm8960.h" + +#define AUDIO_NAME "wm8960" + +struct snd_soc_codec_device soc_codec_dev_wm8960; + +/* R25 - Power 1 */ +#define WM8960_VREF 0x40 + +/* R28 - Anti-pop 1 */ +#define WM8960_POBCTRL 0x80 +#define WM8960_BUFDCOPEN 0x10 +#define WM8960_BUFIOEN 0x08 +#define WM8960_SOFT_ST 0x04 +#define WM8960_HPSTBY 0x01 + +/* R29 - Anti-pop 2 */ +#define WM8960_DISOP 0x40 + +/* + * wm8960 register cache + * We can't read the WM8960 register space when we are + * using 2 wire for device control, so we cache them instead. + */ +static const u16 wm8960_reg[WM8960_CACHEREGNUM] = { + 0x0097, 0x0097, 0x0000, 0x0000, + 0x0000, 0x0008, 0x0000, 0x000a, + 0x01c0, 0x0000, 0x00ff, 0x00ff, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x007b, 0x0100, 0x0032, + 0x0000, 0x00c3, 0x00c3, 0x01c0, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, + 0x0100, 0x0100, 0x0050, 0x0050, + 0x0050, 0x0050, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0040, 0x0000, + 0x0000, 0x0050, 0x0050, 0x0000, + 0x0002, 0x0037, 0x004d, 0x0080, + 0x0008, 0x0031, 0x0026, 0x00e9, +}; + +struct wm8960_priv { + u16 reg_cache[WM8960_CACHEREGNUM]; + struct snd_soc_codec codec; +}; + +/* + * read wm8960 register cache + */ +static inline unsigned int wm8960_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u16 *cache = codec->reg_cache; + if (reg == WM8960_RESET) + return 0; + if (reg >= WM8960_CACHEREGNUM) + return -1; + return cache[reg]; +} + +/* + * write wm8960 register cache + */ +static inline void wm8960_write_reg_cache(struct snd_soc_codec *codec, + u16 reg, unsigned int value) +{ + u16 *cache = codec->reg_cache; + if (reg >= WM8960_CACHEREGNUM) + return; + cache[reg] = value; +} + +static inline unsigned int wm8960_read(struct snd_soc_codec *codec, + unsigned int reg) +{ + return wm8960_read_reg_cache(codec, reg); +} + +/* + * write to the WM8960 register space + */ +static int wm8960_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) +{ + u8 data[2]; + + /* data is + * D15..D9 WM8960 register offset + * D8...D0 register data + */ + data[0] = (reg << 1) | ((value >> 8) & 0x0001); + data[1] = value & 0x00ff; + + wm8960_write_reg_cache(codec, reg, value); + if (codec->hw_write(codec->control_data, data, 2) == 2) + return 0; + else + return -EIO; +} + +#define wm8960_reset(c) wm8960_write(c, WM8960_RESET, 0) + +/* enumerated controls */ +static const char *wm8960_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"}; +static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted", + "Right Inverted", "Stereo Inversion"}; +static const char *wm8960_3d_upper_cutoff[] = {"High", "Low"}; +static const char *wm8960_3d_lower_cutoff[] = {"Low", "High"}; +static const char *wm8960_alcfunc[] = {"Off", "Right", "Left", "Stereo"}; +static const char *wm8960_alcmode[] = {"ALC", "Limiter"}; + +static const struct soc_enum wm8960_enum[] = { + SOC_ENUM_SINGLE(WM8960_DACCTL1, 1, 4, wm8960_deemph), + SOC_ENUM_SINGLE(WM8960_DACCTL1, 5, 4, wm8960_polarity), + SOC_ENUM_SINGLE(WM8960_DACCTL2, 5, 4, wm8960_polarity), + SOC_ENUM_SINGLE(WM8960_3D, 6, 2, wm8960_3d_upper_cutoff), + SOC_ENUM_SINGLE(WM8960_3D, 5, 2, wm8960_3d_lower_cutoff), + SOC_ENUM_SINGLE(WM8960_ALC1, 7, 4, wm8960_alcfunc), + SOC_ENUM_SINGLE(WM8960_ALC3, 8, 2, wm8960_alcmode), +}; + +static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0); +static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1); +static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0); +static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); + +static const struct snd_kcontrol_new wm8960_snd_controls[] = { +SOC_DOUBLE_R_TLV("Capture Volume", WM8960_LINVOL, WM8960_RINVOL, + 0, 63, 0, adc_tlv), +SOC_DOUBLE_R("Capture Volume ZC Switch", WM8960_LINVOL, WM8960_RINVOL, + 6, 1, 0), +SOC_DOUBLE_R("Capture Switch", WM8960_LINVOL, WM8960_RINVOL, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("Playback Volume", WM8960_LDAC, WM8960_RDAC, + 0, 255, 0, dac_tlv), + +SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8960_LOUT1, WM8960_ROUT1, + 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8960_LOUT1, WM8960_ROUT1, + 7, 1, 0), + +SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8960_LOUT2, WM8960_ROUT2, + 0, 127, 0, out_tlv), +SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8960_LOUT2, WM8960_ROUT2, + 7, 1, 0), +SOC_SINGLE("Speaker DC Volume", WM8960_CLASSD3, 3, 5, 0), +SOC_SINGLE("Speaker AC Volume", WM8960_CLASSD3, 0, 5, 0), + +SOC_SINGLE("PCM Playback -6dB Switch", WM8960_DACCTL1, 7, 1, 0), +SOC_ENUM("ADC Polarity", wm8960_enum[1]), +SOC_ENUM("Playback De-emphasis", wm8960_enum[0]), +SOC_SINGLE("ADC High Pass Filter Switch", WM8960_DACCTL1, 0, 1, 0), + +SOC_ENUM("DAC Polarity", wm8960_enum[2]), + +SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[3]), +SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[4]), +SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0), +SOC_SINGLE("3D Switch", WM8960_3D, 0, 1, 0), + +SOC_ENUM("ALC Function", wm8960_enum[5]), +SOC_SINGLE("ALC Max Gain", WM8960_ALC1, 4, 7, 0), +SOC_SINGLE("ALC Target", WM8960_ALC1, 0, 15, 1), +SOC_SINGLE("ALC Min Gain", WM8960_ALC2, 4, 7, 0), +SOC_SINGLE("ALC Hold Time", WM8960_ALC2, 0, 15, 0), +SOC_ENUM("ALC Mode", wm8960_enum[6]), +SOC_SINGLE("ALC Decay", WM8960_ALC3, 4, 15, 0), +SOC_SINGLE("ALC Attack", WM8960_ALC3, 0, 15, 0), + +SOC_SINGLE("Noise Gate Threshold", WM8960_NOISEG, 3, 31, 0), +SOC_SINGLE("Noise Gate Switch", WM8960_NOISEG, 0, 1, 0), + +SOC_DOUBLE_R("ADC PCM Capture Volume", WM8960_LINPATH, WM8960_RINPATH, + 0, 127, 0), + +SOC_SINGLE_TLV("Left Output Mixer Boost Bypass Volume", + WM8960_BYPASS1, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Left Output Mixer LINPUT3 Volume", + WM8960_LOUTMIX, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Right Output Mixer Boost Bypass Volume", + WM8960_BYPASS2, 4, 7, 1, bypass_tlv), +SOC_SINGLE_TLV("Right Output Mixer RINPUT3 Volume", + WM8960_ROUTMIX, 4, 7, 1, bypass_tlv), +}; + +static const struct snd_kcontrol_new wm8960_lin_boost[] = { +SOC_DAPM_SINGLE("LINPUT2 Switch", WM8960_LINPATH, 6, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LINPATH, 7, 1, 0), +SOC_DAPM_SINGLE("LINPUT1 Switch", WM8960_LINPATH, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_lin[] = { +SOC_DAPM_SINGLE("Boost Switch", WM8960_LINPATH, 3, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_rin_boost[] = { +SOC_DAPM_SINGLE("RINPUT2 Switch", WM8960_RINPATH, 6, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_RINPATH, 7, 1, 0), +SOC_DAPM_SINGLE("RINPUT1 Switch", WM8960_RINPATH, 8, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_rin[] = { +SOC_DAPM_SINGLE("Boost Switch", WM8960_RINPATH, 3, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_loutput_mixer[] = { +SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_LOUTMIX, 8, 1, 0), +SOC_DAPM_SINGLE("LINPUT3 Switch", WM8960_LOUTMIX, 7, 1, 0), +SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS1, 7, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_routput_mixer[] = { +SOC_DAPM_SINGLE("PCM Playback Switch", WM8960_ROUTMIX, 8, 1, 0), +SOC_DAPM_SINGLE("RINPUT3 Switch", WM8960_ROUTMIX, 7, 1, 0), +SOC_DAPM_SINGLE("Boost Bypass Switch", WM8960_BYPASS2, 7, 1, 0), +}; + +static const struct snd_kcontrol_new wm8960_mono_out[] = { +SOC_DAPM_SINGLE("Left Switch", WM8960_MONOMIX1, 7, 1, 0), +SOC_DAPM_SINGLE("Right Switch", WM8960_MONOMIX2, 7, 1, 0), +}; + +static const struct snd_soc_dapm_widget wm8960_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("LINPUT1"), +SND_SOC_DAPM_INPUT("RINPUT1"), +SND_SOC_DAPM_INPUT("LINPUT2"), +SND_SOC_DAPM_INPUT("RINPUT2"), +SND_SOC_DAPM_INPUT("LINPUT3"), +SND_SOC_DAPM_INPUT("RINPUT3"), + +SND_SOC_DAPM_MICBIAS("MICB", WM8960_POWER1, 1, 0), + +SND_SOC_DAPM_MIXER("Left Boost Mixer", WM8960_POWER1, 5, 0, + wm8960_lin_boost, ARRAY_SIZE(wm8960_lin_boost)), +SND_SOC_DAPM_MIXER("Right Boost Mixer", WM8960_POWER1, 4, 0, + wm8960_rin_boost, ARRAY_SIZE(wm8960_rin_boost)), + +SND_SOC_DAPM_MIXER("Left Input Mixer", WM8960_POWER3, 5, 0, + wm8960_lin, ARRAY_SIZE(wm8960_lin)), +SND_SOC_DAPM_MIXER("Right Input Mixer", WM8960_POWER3, 4, 0, + wm8960_rin, ARRAY_SIZE(wm8960_rin)), + +SND_SOC_DAPM_ADC("Left ADC", "Capture", WM8960_POWER2, 3, 0), +SND_SOC_DAPM_ADC("Right ADC", "Capture", WM8960_POWER2, 2, 0), + +SND_SOC_DAPM_DAC("Left DAC", "Playback", WM8960_POWER2, 8, 0), +SND_SOC_DAPM_DAC("Right DAC", "Playback", WM8960_POWER2, 7, 0), + +SND_SOC_DAPM_MIXER("Left Output Mixer", WM8960_POWER3, 3, 0, + &wm8960_loutput_mixer[0], + ARRAY_SIZE(wm8960_loutput_mixer)), +SND_SOC_DAPM_MIXER("Right Output Mixer", WM8960_POWER3, 2, 0, + &wm8960_routput_mixer[0], + ARRAY_SIZE(wm8960_routput_mixer)), + +SND_SOC_DAPM_MIXER("Mono Output Mixer", WM8960_POWER2, 1, 0, + &wm8960_mono_out[0], + ARRAY_SIZE(wm8960_mono_out)), + +SND_SOC_DAPM_PGA("LOUT1 PGA", WM8960_POWER2, 6, 0, NULL, 0), +SND_SOC_DAPM_PGA("ROUT1 PGA", WM8960_POWER2, 5, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Left Speaker PGA", WM8960_POWER2, 4, 0, NULL, 0), +SND_SOC_DAPM_PGA("Right Speaker PGA", WM8960_POWER2, 3, 0, NULL, 0), + +SND_SOC_DAPM_PGA("Right Speaker Output", WM8960_CLASSD1, 7, 0, NULL, 0), +SND_SOC_DAPM_PGA("Left Speaker Output", WM8960_CLASSD1, 6, 0, NULL, 0), + +SND_SOC_DAPM_OUTPUT("SPK_LP"), +SND_SOC_DAPM_OUTPUT("SPK_LN"), +SND_SOC_DAPM_OUTPUT("HP_L"), +SND_SOC_DAPM_OUTPUT("HP_R"), +SND_SOC_DAPM_OUTPUT("SPK_RP"), +SND_SOC_DAPM_OUTPUT("SPK_RN"), +SND_SOC_DAPM_OUTPUT("OUT3"), +}; + +static const struct snd_soc_dapm_route audio_paths[] = { + { "Left Boost Mixer", "LINPUT1 Switch", "LINPUT1" }, + { "Left Boost Mixer", "LINPUT2 Switch", "LINPUT2" }, + { "Left Boost Mixer", "LINPUT3 Switch", "LINPUT3" }, + + { "Left Input Mixer", "Boost Switch", "Left Boost Mixer", }, + { "Left Input Mixer", NULL, "LINPUT1", }, /* Really Boost Switch */ + { "Left Input Mixer", NULL, "LINPUT2" }, + { "Left Input Mixer", NULL, "LINPUT3" }, + + { "Right Boost Mixer", "RINPUT1 Switch", "RINPUT1" }, + { "Right Boost Mixer", "RINPUT2 Switch", "RINPUT2" }, + { "Right Boost Mixer", "RINPUT3 Switch", "RINPUT3" }, + + { "Right Input Mixer", "Boost Switch", "Right Boost Mixer", }, + { "Right Input Mixer", NULL, "RINPUT1", }, /* Really Boost Switch */ + { "Right Input Mixer", NULL, "RINPUT2" }, + { "Right Input Mixer", NULL, "LINPUT3" }, + + { "Left ADC", NULL, "Left Input Mixer" }, + { "Right ADC", NULL, "Right Input Mixer" }, + + { "Left Output Mixer", "LINPUT3 Switch", "LINPUT3" }, + { "Left Output Mixer", "Boost Bypass Switch", "Left Boost Mixer"} , + { "Left Output Mixer", "PCM Playback Switch", "Left DAC" }, + + { "Right Output Mixer", "RINPUT3 Switch", "RINPUT3" }, + { "Right Output Mixer", "Boost Bypass Switch", "Right Boost Mixer" } , + { "Right Output Mixer", "PCM Playback Switch", "Right DAC" }, + + { "Mono Output Mixer", "Left Switch", "Left Output Mixer" }, + { "Mono Output Mixer", "Right Switch", "Right Output Mixer" }, + + { "LOUT1 PGA", NULL, "Left Output Mixer" }, + { "ROUT1 PGA", NULL, "Right Output Mixer" }, + + { "HP_L", NULL, "LOUT1 PGA" }, + { "HP_R", NULL, "ROUT1 PGA" }, + + { "Left Speaker PGA", NULL, "Left Output Mixer" }, + { "Right Speaker PGA", NULL, "Right Output Mixer" }, + + { "Left Speaker Output", NULL, "Left Speaker PGA" }, + { "Right Speaker Output", NULL, "Right Speaker PGA" }, + + { "SPK_LN", NULL, "Left Speaker Output" }, + { "SPK_LP", NULL, "Left Speaker Output" }, + { "SPK_RN", NULL, "Right Speaker Output" }, + { "SPK_RP", NULL, "Right Speaker Output" }, + + { "OUT3", NULL, "Mono Output Mixer", } +}; + +static int wm8960_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, wm8960_dapm_widgets, + ARRAY_SIZE(wm8960_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_paths, ARRAY_SIZE(audio_paths)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 iface = 0; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + iface |= 0x0040; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + /* interface format */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + iface |= 0x0002; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + iface |= 0x0001; + break; + case SND_SOC_DAIFMT_DSP_A: + iface |= 0x0003; + break; + case SND_SOC_DAIFMT_DSP_B: + iface |= 0x0013; + break; + default: + return -EINVAL; + } + + /* clock inversion */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + iface |= 0x0090; + break; + case SND_SOC_DAIFMT_IB_NF: + iface |= 0x0080; + break; + case SND_SOC_DAIFMT_NB_IF: + iface |= 0x0010; + break; + default: + return -EINVAL; + } + + /* set iface */ + wm8960_write(codec, WM8960_IFACE1, iface); + return 0; +} + +static int wm8960_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->card->codec; + u16 iface = wm8960_read(codec, WM8960_IFACE1) & 0xfff3; + + /* bit size */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + iface |= 0x0004; + break; + case SNDRV_PCM_FORMAT_S24_LE: + iface |= 0x0008; + break; + } + + /* set iface */ + wm8960_write(codec, WM8960_IFACE1, iface); + return 0; +} + +static int wm8960_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + u16 mute_reg = wm8960_read(codec, WM8960_DACCTL1) & 0xfff7; + + if (mute) + wm8960_write(codec, WM8960_DACCTL1, mute_reg | 0x8); + else + wm8960_write(codec, WM8960_DACCTL1, mute_reg); + return 0; +} + +static int wm8960_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + struct wm8960_data *pdata = codec->dev->platform_data; + u16 reg; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + /* Set VMID to 2x50k */ + reg = wm8960_read(codec, WM8960_POWER1); + reg &= ~0x180; + reg |= 0x80; + wm8960_write(codec, WM8960_POWER1, reg); + break; + + case SND_SOC_BIAS_STANDBY: + if (codec->bias_level == SND_SOC_BIAS_OFF) { + /* Enable anti-pop features */ + wm8960_write(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN | WM8960_BUFIOEN); + + /* Discharge HP output */ + reg = WM8960_DISOP; + if (pdata) + reg |= pdata->dres << 4; + wm8960_write(codec, WM8960_APOP2, reg); + + msleep(400); + + wm8960_write(codec, WM8960_APOP2, 0); + + /* Enable & ramp VMID at 2x50k */ + reg = wm8960_read(codec, WM8960_POWER1); + reg |= 0x80; + wm8960_write(codec, WM8960_POWER1, reg); + msleep(100); + + /* Enable VREF */ + wm8960_write(codec, WM8960_POWER1, reg | WM8960_VREF); + + /* Disable anti-pop features */ + wm8960_write(codec, WM8960_APOP1, WM8960_BUFIOEN); + } + + /* Set VMID to 2x250k */ + reg = wm8960_read(codec, WM8960_POWER1); + reg &= ~0x180; + reg |= 0x100; + wm8960_write(codec, WM8960_POWER1, reg); + break; + + case SND_SOC_BIAS_OFF: + /* Enable anti-pop features */ + wm8960_write(codec, WM8960_APOP1, + WM8960_POBCTRL | WM8960_SOFT_ST | + WM8960_BUFDCOPEN | WM8960_BUFIOEN); + + /* Disable VMID and VREF, let them discharge */ + wm8960_write(codec, WM8960_POWER1, 0); + msleep(600); + + wm8960_write(codec, WM8960_APOP1, 0); + break; + } + + codec->bias_level = level; + + return 0; +} + +/* PLL divisors */ +struct _pll_div { + u32 pre_div:1; + u32 n:4; + u32 k:24; +}; + +/* The size in bits of the pll divide multiplied by 10 + * to allow rounding later */ +#define FIXED_PLL_SIZE ((1 << 24) * 10) + +static int pll_factors(unsigned int source, unsigned int target, + struct _pll_div *pll_div) +{ + unsigned long long Kpart; + unsigned int K, Ndiv, Nmod; + + pr_debug("WM8960 PLL: setting %dHz->%dHz\n", source, target); + + /* Scale up target to PLL operating frequency */ + target *= 4; + + Ndiv = target / source; + if (Ndiv < 6) { + source >>= 1; + pll_div->pre_div = 1; + Ndiv = target / source; + } else + pll_div->pre_div = 0; + + if ((Ndiv < 6) || (Ndiv > 12)) { + pr_err("WM8960 PLL: Unsupported N=%d\n", Ndiv); + return -EINVAL; + } + + pll_div->n = Ndiv; + Nmod = target % source; + Kpart = FIXED_PLL_SIZE * (long long)Nmod; + + do_div(Kpart, source); + + K = Kpart & 0xFFFFFFFF; + + /* Check if we need to round */ + if ((K % 10) >= 5) + K += 5; + + /* Move down to proper range now rounding is done */ + K /= 10; + + pll_div->k = K; + + pr_debug("WM8960 PLL: N=%x K=%x pre_div=%d\n", + pll_div->n, pll_div->k, pll_div->pre_div); + + return 0; +} + +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + static struct _pll_div pll_div; + int ret; + + if (freq_in && freq_out) { + ret = pll_factors(freq_in, freq_out, &pll_div); + if (ret != 0) + return ret; + } + + /* Disable the PLL: even if we are changing the frequency the + * PLL needs to be disabled while we do so. */ + wm8960_write(codec, WM8960_CLOCK1, + wm8960_read(codec, WM8960_CLOCK1) & ~1); + wm8960_write(codec, WM8960_POWER2, + wm8960_read(codec, WM8960_POWER2) & ~1); + + if (!freq_in || !freq_out) + return 0; + + reg = wm8960_read(codec, WM8960_PLL1) & ~0x3f; + reg |= pll_div.pre_div << 4; + reg |= pll_div.n; + + if (pll_div.k) { + reg |= 0x20; + + wm8960_write(codec, WM8960_PLL2, (pll_div.k >> 18) & 0x3f); + wm8960_write(codec, WM8960_PLL3, (pll_div.k >> 9) & 0x1ff); + wm8960_write(codec, WM8960_PLL4, pll_div.k & 0x1ff); + } + wm8960_write(codec, WM8960_PLL1, reg); + + /* Turn it on */ + wm8960_write(codec, WM8960_POWER2, + wm8960_read(codec, WM8960_POWER2) | 1); + msleep(250); + wm8960_write(codec, WM8960_CLOCK1, + wm8960_read(codec, WM8960_CLOCK1) | 1); + + return 0; +} + +static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, + int div_id, int div) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u16 reg; + + switch (div_id) { + case WM8960_SYSCLKSEL: + reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1fe; + wm8960_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_SYSCLKDIV: + reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1f9; + wm8960_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_DACDIV: + reg = wm8960_read(codec, WM8960_CLOCK1) & 0x1c7; + wm8960_write(codec, WM8960_CLOCK1, reg | div); + break; + case WM8960_OPCLKDIV: + reg = wm8960_read(codec, WM8960_PLL1) & 0x03f; + wm8960_write(codec, WM8960_PLL1, reg | div); + break; + case WM8960_DCLKDIV: + reg = wm8960_read(codec, WM8960_CLOCK2) & 0x03f; + wm8960_write(codec, WM8960_CLOCK2, reg | div); + break; + case WM8960_TOCLKSEL: + reg = wm8960_read(codec, WM8960_ADDCTL1) & 0x1fd; + wm8960_write(codec, WM8960_ADDCTL1, reg | div); + break; + default: + return -EINVAL; + } + + return 0; +} + +#define WM8960_RATES SNDRV_PCM_RATE_8000_48000 + +#define WM8960_FORMATS \ + (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_ops wm8960_dai_ops = { + .hw_params = wm8960_hw_params, + .digital_mute = wm8960_mute, + .set_fmt = wm8960_set_dai_fmt, + .set_clkdiv = wm8960_set_dai_clkdiv, + .set_pll = wm8960_set_dai_pll, +}; + +struct snd_soc_dai wm8960_dai = { + .name = "WM8960", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = WM8960_RATES, + .formats = WM8960_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = WM8960_RATES, + .formats = WM8960_FORMATS,}, + .ops = &wm8960_dai_ops, + .symmetric_rates = 1, +}; +EXPORT_SYMBOL_GPL(wm8960_dai); + +static int wm8960_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + + wm8960_set_bias_level(codec, SND_SOC_BIAS_OFF); + return 0; +} + +static int wm8960_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->card->codec; + int i; + u8 data[2]; + u16 *cache = codec->reg_cache; + + /* Sync reg_cache with the hardware */ + for (i = 0; i < ARRAY_SIZE(wm8960_reg); i++) { + data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001); + data[1] = cache[i] & 0x00ff; + codec->hw_write(codec->control_data, data, 2); + } + + wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + wm8960_set_bias_level(codec, codec->suspend_bias_level); + return 0; +} + +static struct snd_soc_codec *wm8960_codec; + +static int wm8960_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + int ret = 0; + + if (wm8960_codec == NULL) { + dev_err(&pdev->dev, "Codec device not registered\n"); + return -ENODEV; + } + + socdev->card->codec = wm8960_codec; + codec = wm8960_codec; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + dev_err(codec->dev, "failed to create pcms: %d\n", ret); + goto pcm_err; + } + + snd_soc_add_controls(codec, wm8960_snd_controls, + ARRAY_SIZE(wm8960_snd_controls)); + wm8960_add_widgets(codec); + ret = snd_soc_init_card(socdev); + if (ret < 0) { + dev_err(codec->dev, "failed to register card: %d\n", ret); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + return ret; +} + +/* power down chip */ +static int wm8960_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_wm8960 = { + .probe = wm8960_probe, + .remove = wm8960_remove, + .suspend = wm8960_suspend, + .resume = wm8960_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_wm8960); + +static int wm8960_register(struct wm8960_priv *wm8960) +{ + struct wm8960_data *pdata = wm8960->codec.dev->platform_data; + struct snd_soc_codec *codec = &wm8960->codec; + int ret; + u16 reg; + + if (wm8960_codec) { + dev_err(codec->dev, "Another WM8960 is registered\n"); + return -EINVAL; + } + + if (!pdata) { + dev_warn(codec->dev, "No platform data supplied\n"); + } else { + if (pdata->dres > WM8960_DRES_MAX) { + dev_err(codec->dev, "Invalid DRES: %d\n", pdata->dres); + pdata->dres = 0; + } + } + + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + codec->private_data = wm8960; + codec->name = "WM8960"; + codec->owner = THIS_MODULE; + codec->read = wm8960_read_reg_cache; + codec->write = wm8960_write; + codec->bias_level = SND_SOC_BIAS_OFF; + codec->set_bias_level = wm8960_set_bias_level; + codec->dai = &wm8960_dai; + codec->num_dai = 1; + codec->reg_cache_size = WM8960_CACHEREGNUM; + codec->reg_cache = &wm8960->reg_cache; + + memcpy(codec->reg_cache, wm8960_reg, sizeof(wm8960_reg)); + + ret = wm8960_reset(codec); + if (ret < 0) { + dev_err(codec->dev, "Failed to issue reset\n"); + return ret; + } + + wm8960_dai.dev = codec->dev; + + wm8960_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + /* Latch the update bits */ + reg = wm8960_read(codec, WM8960_LINVOL); + wm8960_write(codec, WM8960_LINVOL, reg | 0x100); + reg = wm8960_read(codec, WM8960_RINVOL); + wm8960_write(codec, WM8960_RINVOL, reg | 0x100); + reg = wm8960_read(codec, WM8960_LADC); + wm8960_write(codec, WM8960_LADC, reg | 0x100); + reg = wm8960_read(codec, WM8960_RADC); + wm8960_write(codec, WM8960_RADC, reg | 0x100); + reg = wm8960_read(codec, WM8960_LDAC); + wm8960_write(codec, WM8960_LDAC, reg | 0x100); + reg = wm8960_read(codec, WM8960_RDAC); + wm8960_write(codec, WM8960_RDAC, reg | 0x100); + reg = wm8960_read(codec, WM8960_LOUT1); + wm8960_write(codec, WM8960_LOUT1, reg | 0x100); + reg = wm8960_read(codec, WM8960_ROUT1); + wm8960_write(codec, WM8960_ROUT1, reg | 0x100); + reg = wm8960_read(codec, WM8960_LOUT2); + wm8960_write(codec, WM8960_LOUT2, reg | 0x100); + reg = wm8960_read(codec, WM8960_ROUT2); + wm8960_write(codec, WM8960_ROUT2, reg | 0x100); + + wm8960_codec = codec; + + ret = snd_soc_register_codec(codec); + if (ret != 0) { + dev_err(codec->dev, "Failed to register codec: %d\n", ret); + return ret; + } + + ret = snd_soc_register_dai(&wm8960_dai); + if (ret != 0) { + dev_err(codec->dev, "Failed to register DAI: %d\n", ret); + snd_soc_unregister_codec(codec); + return ret; + } + + return 0; +} + +static void wm8960_unregister(struct wm8960_priv *wm8960) +{ + wm8960_set_bias_level(&wm8960->codec, SND_SOC_BIAS_OFF); + snd_soc_unregister_dai(&wm8960_dai); + snd_soc_unregister_codec(&wm8960->codec); + kfree(wm8960); + wm8960_codec = NULL; +} + +static __devinit int wm8960_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct wm8960_priv *wm8960; + struct snd_soc_codec *codec; + + wm8960 = kzalloc(sizeof(struct wm8960_priv), GFP_KERNEL); + if (wm8960 == NULL) + return -ENOMEM; + + codec = &wm8960->codec; + codec->hw_write = (hw_write_t)i2c_master_send; + + i2c_set_clientdata(i2c, wm8960); + codec->control_data = i2c; + + codec->dev = &i2c->dev; + + return wm8960_register(wm8960); +} + +static __devexit int wm8960_i2c_remove(struct i2c_client *client) +{ + struct wm8960_priv *wm8960 = i2c_get_clientdata(client); + wm8960_unregister(wm8960); + return 0; +} + +static const struct i2c_device_id wm8960_i2c_id[] = { + { "wm8960", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8960_i2c_id); + +static struct i2c_driver wm8960_i2c_driver = { + .driver = { + .name = "WM8960 I2C Codec", + .owner = THIS_MODULE, + }, + .probe = wm8960_i2c_probe, + .remove = __devexit_p(wm8960_i2c_remove), + .id_table = wm8960_i2c_id, +}; + +static int __init wm8960_modinit(void) +{ + int ret; + + ret = i2c_add_driver(&wm8960_i2c_driver); + if (ret != 0) { + printk(KERN_ERR "Failed to register WM8960 I2C driver: %d\n", + ret); + } + + return ret; +} +module_init(wm8960_modinit); + +static void __exit wm8960_exit(void) +{ + i2c_del_driver(&wm8960_i2c_driver); +} +module_exit(wm8960_exit); + + +MODULE_DESCRIPTION("ASoC WM8960 driver"); +MODULE_AUTHOR("Liam Girdwood"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h new file mode 100644 index 0000000..c9af56c --- /dev/null +++ b/sound/soc/codecs/wm8960.h @@ -0,0 +1,127 @@ +/* + * wm8960.h -- WM8960 Soc Audio driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _WM8960_H +#define _WM8960_H + +/* WM8960 register space */ + + +#define WM8960_CACHEREGNUM 56 + +#define WM8960_LINVOL 0x0 +#define WM8960_RINVOL 0x1 +#define WM8960_LOUT1 0x2 +#define WM8960_ROUT1 0x3 +#define WM8960_CLOCK1 0x4 +#define WM8960_DACCTL1 0x5 +#define WM8960_DACCTL2 0x6 +#define WM8960_IFACE1 0x7 +#define WM8960_CLOCK2 0x8 +#define WM8960_IFACE2 0x9 +#define WM8960_LDAC 0xa +#define WM8960_RDAC 0xb + +#define WM8960_RESET 0xf +#define WM8960_3D 0x10 +#define WM8960_ALC1 0x11 +#define WM8960_ALC2 0x12 +#define WM8960_ALC3 0x13 +#define WM8960_NOISEG 0x14 +#define WM8960_LADC 0x15 +#define WM8960_RADC 0x16 +#define WM8960_ADDCTL1 0x17 +#define WM8960_ADDCTL2 0x18 +#define WM8960_POWER1 0x19 +#define WM8960_POWER2 0x1a +#define WM8960_ADDCTL3 0x1b +#define WM8960_APOP1 0x1c +#define WM8960_APOP2 0x1d + +#define WM8960_LINPATH 0x20 +#define WM8960_RINPATH 0x21 +#define WM8960_LOUTMIX 0x22 + +#define WM8960_ROUTMIX 0x25 +#define WM8960_MONOMIX1 0x26 +#define WM8960_MONOMIX2 0x27 +#define WM8960_LOUT2 0x28 +#define WM8960_ROUT2 0x29 +#define WM8960_MONO 0x2a +#define WM8960_INBMIX1 0x2b +#define WM8960_INBMIX2 0x2c +#define WM8960_BYPASS1 0x2d +#define WM8960_BYPASS2 0x2e +#define WM8960_POWER3 0x2f +#define WM8960_ADDCTL4 0x30 +#define WM8960_CLASSD1 0x31 + +#define WM8960_CLASSD3 0x33 +#define WM8960_PLL1 0x34 +#define WM8960_PLL2 0x35 +#define WM8960_PLL3 0x36 +#define WM8960_PLL4 0x37 + + +/* + * WM8960 Clock dividers + */ +#define WM8960_SYSCLKDIV 0 +#define WM8960_DACDIV 1 +#define WM8960_OPCLKDIV 2 +#define WM8960_DCLKDIV 3 +#define WM8960_TOCLKSEL 4 +#define WM8960_SYSCLKSEL 5 + +#define WM8960_SYSCLK_DIV_1 (0 << 1) +#define WM8960_SYSCLK_DIV_2 (2 << 1) + +#define WM8960_SYSCLK_MCLK (0 << 0) +#define WM8960_SYSCLK_PLL (1 << 0) + +#define WM8960_DAC_DIV_1 (0 << 3) +#define WM8960_DAC_DIV_1_5 (1 << 3) +#define WM8960_DAC_DIV_2 (2 << 3) +#define WM8960_DAC_DIV_3 (3 << 3) +#define WM8960_DAC_DIV_4 (4 << 3) +#define WM8960_DAC_DIV_5_5 (5 << 3) +#define WM8960_DAC_DIV_6 (6 << 3) + +#define WM8960_DCLK_DIV_1_5 (0 << 6) +#define WM8960_DCLK_DIV_2 (1 << 6) +#define WM8960_DCLK_DIV_3 (2 << 6) +#define WM8960_DCLK_DIV_4 (3 << 6) +#define WM8960_DCLK_DIV_6 (4 << 6) +#define WM8960_DCLK_DIV_8 (5 << 6) +#define WM8960_DCLK_DIV_12 (6 << 6) +#define WM8960_DCLK_DIV_16 (7 << 6) + +#define WM8960_TOCLK_F19 (0 << 1) +#define WM8960_TOCLK_F21 (1 << 1) + +#define WM8960_OPCLK_DIV_1 (0 << 0) +#define WM8960_OPCLK_DIV_2 (1 << 0) +#define WM8960_OPCLK_DIV_3 (2 << 0) +#define WM8960_OPCLK_DIV_4 (3 << 0) +#define WM8960_OPCLK_DIV_5_5 (4 << 0) +#define WM8960_OPCLK_DIV_6 (5 << 0) + +extern struct snd_soc_dai wm8960_dai; +extern struct snd_soc_codec_device soc_codec_dev_wm8960; + +#define WM8960_DRES_400R 0 +#define WM8960_DRES_200R 1 +#define WM8960_DRES_600R 2 +#define WM8960_DRES_150R 3 +#define WM8960_DRES_MAX 3 + +struct wm8960_data { + int dres; +}; + +#endif