The new values for the recent Intel and AMD chips are missing in the documentation. Add the new descriptions.
Signed-off-by: Takashi Iwai tiwai@suse.de --- Documentation/sound/alsa-configuration.rst | 2 ++ Documentation/sound/hd-audio/notes.rst | 5 +++++ 2 files changed, 7 insertions(+)
diff --git a/Documentation/sound/alsa-configuration.rst b/Documentation/sound/alsa-configuration.rst index 4a3cecc8ad38..02aacd69ab96 100644 --- a/Documentation/sound/alsa-configuration.rst +++ b/Documentation/sound/alsa-configuration.rst @@ -1001,6 +1001,8 @@ position_fix 2 = POSBUF: use position buffer, 3 = VIACOMBO: VIA-specific workaround for capture, 4 = COMBO: use LPIB for playback, auto for capture stream + 5 = SKL+: apply the delay calculation available on recent Intel chips + 6 = FIFO: correct the position with the fixed FIFO size, for recent AMD chips probe_mask Bitmask to probe codecs (default = -1, meaning all slots); When the bit 8 (0x100) is set, the lower 8 bits are used diff --git a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst index 9f7347830ba4..0f3109d9abc8 100644 --- a/Documentation/sound/hd-audio/notes.rst +++ b/Documentation/sound/hd-audio/notes.rst @@ -66,6 +66,11 @@ by comparing both LPIB and position-buffer values. ``position_fix=4`` is another combination available for all controllers, and uses LPIB for the playback and the position-buffer for the capture streams. +``position_fix=5`` is specific to Intel platforms, so far, for Skylake +and onward. It applies the delay calculation for the precise position +reporting. +``position_fix=6`` is to correct the position with the fixed FIFO +size, mainly targeted for the recent AMD controllers. 0 is the default value for all other controllers, the automatic check and fallback to LPIB as described in the above. If you get a problem of repeated sounds, this option might