From: Jiada Wang jiada_wang@mentor.com
The number of channel handled by SSI maybe differs from the one set in hw_params, currently SSI checks hw_params's channel number, and constrains to use same channel number, when it is being used by multiple clients.
This patch corrects to check runtime channel number rather than channel number set in hw_params.
Signed-off-by: Jiada Wang jiada_wang@mentor.com Signed-off-by: Timo Wischer twischer@de.adit-jv.com [kuninori: adjust to upstreaming] Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Tested-by: Hiroyuki Yokoyama hiroyuki.yokoyama.vx@renesas.com --- sound/soc/sh/rcar/ssi.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 89cc433..3f6dd9f 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -307,6 +307,11 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, return -EINVAL; }
+ if (ssi->chan != chan) { + dev_err(dev, "SSI parent/child should use same chan\n"); + return -EINVAL; + } + return 0; }
@@ -334,6 +339,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, SCKD | SWSD | CKDV(idx); ssi->wsr = CONT; ssi->rate = rate; + ssi->chan = chan;
dev_dbg(dev, "%s[%d] outputs %u Hz\n", rsnd_mod_name(mod), @@ -359,6 +365,7 @@ static void rsnd_ssi_master_clk_stop(struct rsnd_mod *mod,
ssi->cr_clk = 0; ssi->rate = 0; + ssi->chan = 0;
rsnd_adg_ssi_clk_stop(mod); } @@ -511,9 +518,7 @@ static int rsnd_ssi_hw_params(struct rsnd_mod *mod, struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); struct rsnd_dai *rdai = rsnd_io_to_rdai(io); - int chan = params_channels(params); unsigned int fmt_width = snd_pcm_format_width(params_format(params));
if (fmt_width > rdai->chan_width) { @@ -524,24 +529,6 @@ static int rsnd_ssi_hw_params(struct rsnd_mod *mod, return -EINVAL; }
- /* - * snd_pcm_ops::hw_params will be called *before* - * snd_soc_dai_ops::trigger. Thus, ssi->usrcnt is 0 - * in 1st call. - */ - if (ssi->usrcnt) { - /* - * Already working. - * It will happen if SSI has parent/child connection. - * it is error if child <-> parent SSI uses - * different channels. - */ - if (ssi->chan != chan) - return -EIO; - } - - ssi->chan = chan; - return 0; }