Add DSP setup functions for the Sound Blaster AE-7 post DSP download.
Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 290 +++++++++++++++++++++++++++++++++++ 1 file changed, 290 insertions(+)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 4ec93a070d73..040233b33074 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -7378,6 +7378,7 @@ static void ca0132_alt_init_speaker_tuning(struct hda_codec *codec) values = zxr_default_delay_values; break; case QUIRK_AE5: + case QUIRK_AE7: values = ae5_default_delay_values; break; default: @@ -7551,6 +7552,7 @@ static void ca0132_alt_dsp_scp_startup(struct hda_codec *codec) switch (ca0132_quirk(spec)) { case QUIRK_SBZ: case QUIRK_AE5: + case QUIRK_AE7: tmp = 0x00000003; dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); tmp = 0x00000000; @@ -7760,6 +7762,206 @@ static void ae5_post_dsp_startup_data(struct hda_codec *codec) mutex_unlock(&spec->chipio_mutex); }
+static const unsigned int ae7_port_set_data[] = { + 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3, 0x0001e2c4, 0x0001e3c5, + 0x0001e8c6, 0x0001e9c7, 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb +}; + +static void ae7_post_dsp_setup_ports(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int i, count, addr; + + mutex_lock(&spec->chipio_mutex); + + chipio_set_stream_channels(codec, 0x0c, 6); + chipio_set_stream_control(codec, 0x0c, 1); + + count = ARRAY_SIZE(ae7_port_set_data); + addr = 0x190030; + for (i = 0; i < count; i++) { + chipio_write_no_mutex(codec, addr, ae7_port_set_data[i]); + + /* Addresses are incremented by 4-bytes. */ + addr += 0x04; + } + + /* + * Port setting always ends with a write of 0x1 to address 0x19042c. + */ + chipio_write_no_mutex(codec, 0x19042c, 0x00000001); + + ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40); + ca0113_mmio_command_set(codec, 0x48, 0x17, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x19, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x11, 0xff); + ca0113_mmio_command_set(codec, 0x48, 0x12, 0xff); + ca0113_mmio_command_set(codec, 0x48, 0x13, 0xff); + ca0113_mmio_command_set(codec, 0x48, 0x14, 0x7f); + + mutex_unlock(&spec->chipio_mutex); +} + +static void ae7_post_dsp_asi_stream_setup(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + mutex_lock(&spec->chipio_mutex); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x81); + ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); + + chipio_set_conn_rate_no_mutex(codec, 0x70, SR_96_000); + chipio_set_stream_channels(codec, 0x0c, 6); + chipio_set_stream_control(codec, 0x0c, 1); + + chipio_set_stream_source_dest(codec, 0x05, 0x43, 0x00); + chipio_set_stream_source_dest(codec, 0x18, 0x09, 0xd0); + + chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); + chipio_set_stream_channels(codec, 0x18, 6); + chipio_set_stream_control(codec, 0x18, 1); + + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 4); + + mutex_unlock(&spec->chipio_mutex); +} + +static void ae7_post_dsp_pll_setup(struct hda_codec *codec) +{ + const unsigned int addr[] = { 0x41, 0x45, 0x40, 0x43, 0x51 }; + const unsigned int data[] = { 0xc8, 0xcc, 0xcb, 0xc7, 0x8d }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(addr); i++) { + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, addr[i]); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, data[i]); + } +} + +static void ae7_post_dsp_asi_setup_ports(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + const unsigned int target[] = { 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11, + 0x12, 0x13, 0x14 }; + const unsigned int data[] = { 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff, + 0xff, 0xff, 0x7f }; + unsigned int i; + + mutex_lock(&spec->chipio_mutex); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7); + + chipio_write_no_mutex(codec, 0x189000, 0x0001f101); + chipio_write_no_mutex(codec, 0x189004, 0x0001f101); + chipio_write_no_mutex(codec, 0x189024, 0x00014004); + chipio_write_no_mutex(codec, 0x189028, 0x0002000f); + + ae7_post_dsp_pll_setup(codec); + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); + + for (i = 0; i < ARRAY_SIZE(target); i++) + ca0113_mmio_command_set(codec, 0x48, target[i], data[i]); + + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); + + chipio_set_stream_source_dest(codec, 0x21, 0x64, 0x56); + chipio_set_stream_channels(codec, 0x21, 2); + chipio_set_conn_rate_no_mutex(codec, 0x56, SR_8_000); + + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_NODE_ID, 0x09); + /* + * In the 8051's memory, this param is referred to as 'n2sid', which I + * believe is 'node to streamID'. It seems to be a way to assign a + * stream to a given HDA node. + */ + chipio_set_control_param_no_mutex(codec, 0x20, 0x21); + + chipio_write_no_mutex(codec, 0x18b038, 0x00000088); + + /* + * Now, at this point on Windows, an actual stream is setup and + * seemingly sends data to the HDA node 0x09, which is the digital + * audio input node. This is left out here, because obviously I don't + * know what data is being sent. Interestingly, the AE-5 seems to go + * through the motions of getting here and never actually takes this + * step, but the AE-7 does. + */ + + ca0113_mmio_gpio_set(codec, 0, 1); + ca0113_mmio_gpio_set(codec, 1, 1); + + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + chipio_write_no_mutex(codec, 0x18b03c, 0x00000000); + ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); + ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); + + chipio_set_stream_source_dest(codec, 0x05, 0x43, 0x00); + chipio_set_stream_source_dest(codec, 0x18, 0x09, 0xd0); + + chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); + chipio_set_stream_channels(codec, 0x18, 6); + + /* + * Runs again, this has been repeated a few times, but I'm just + * following what the Windows driver does. + */ + ae7_post_dsp_pll_setup(codec); + chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); + + mutex_unlock(&spec->chipio_mutex); +} + +/* + * The Windows driver has commands that seem to setup ASI, which I believe to + * be some sort of audio serial interface. My current speculation is that it's + * related to communicating with the new DAC. + */ +static void ae7_post_dsp_asi_setup(struct hda_codec *codec) +{ + chipio_8051_write_direct(codec, 0x93, 0x10); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x44); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc2); + + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); + ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); + + chipio_set_control_param(codec, 3, 3); + chipio_set_control_flag(codec, CONTROL_FLAG_ASI_96KHZ, 1); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x724, 0x83); + chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); + snd_hda_codec_write(codec, 0x17, 0, 0x794, 0x00); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x92); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0xfa); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_DATA_WRITE, 0x22); + + ae7_post_dsp_pll_setup(codec); + ae7_post_dsp_asi_stream_setup(codec); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x43); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PLL_PMU_WRITE, 0xc7); + + ae7_post_dsp_asi_setup_ports(codec); +} + /* * Setup default parameters for DSP */ @@ -7983,6 +8185,91 @@ static void ae5_setup_defaults(struct hda_codec *codec) ca0132_alt_create_dummy_stream(codec); }
+/* + * Setup default parameters for the Sound Blaster AE-7 DSP. + */ +static void ae7_setup_defaults(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp; + int num_fx; + int idx, i; + + if (spec->dsp_state != DSP_DOWNLOADED) + return; + + ca0132_alt_dsp_scp_startup(codec); + ca0132_alt_init_analog_mics(codec); + ae7_post_dsp_setup_ports(codec); + + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, + SPEAKER_TUNING_FRONT_LEFT_INVERT, tmp); + dspio_set_uint_param(codec, 0x96, + SPEAKER_TUNING_FRONT_RIGHT_INVERT, tmp); + + ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); + + /* New, unknown SCP req's */ + dspio_set_uint_param(codec, 0x80, 0x0d, tmp); + dspio_set_uint_param(codec, 0x80, 0x0e, tmp); + + ca0113_mmio_gpio_set(codec, 0, false); + + /* Internal loopback off */ + tmp = FLOAT_ONE; + dspio_set_uint_param(codec, 0x37, 0x08, tmp); + dspio_set_uint_param(codec, 0x37, 0x10, tmp); + + /*remove DSP headroom*/ + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, 0x3C, tmp); + + /* set WUH source */ + tmp = FLOAT_TWO; + dspio_set_uint_param(codec, 0x31, 0x00, tmp); + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + + /* Set speaker source? */ + dspio_set_uint_param(codec, 0x32, 0x00, tmp); + ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); + + /* + * This is the second time we've called this, but this is seemingly + * what Windows does. + */ + ca0132_alt_init_analog_mics(codec); + + ae7_post_dsp_asi_setup(codec); + + /* + * Not sure why, but these are both set to 1. They're only set to 0 + * upon shutdown. + */ + ca0113_mmio_gpio_set(codec, 0, true); + ca0113_mmio_gpio_set(codec, 1, true); + + /* Volume control related. */ + ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x04); + ca0113_mmio_command_set(codec, 0x48, 0x10, 0x04); + ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x80); + + /* out, in effects + voicefx */ + num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; + for (idx = 0; idx < num_fx; idx++) { + for (i = 0; i <= ca0132_effects[idx].params; i++) { + dspio_set_uint_param(codec, + ca0132_effects[idx].mid, + ca0132_effects[idx].reqs[i], + ca0132_effects[idx].def_vals[i]); + } + } + + ca0132_alt_init_speaker_tuning(codec); + + ca0132_alt_create_dummy_stream(codec); +} + /* * Initialization of flags in chip */ @@ -9000,6 +9287,9 @@ static int ca0132_init(struct hda_codec *codec) case QUIRK_AE5: ae5_setup_defaults(codec); break; + case QUIRK_AE7: + ae7_setup_defaults(codec); + break; default: ca0132_setup_defaults(codec); ca0132_init_analog_mic2(codec);