Add support for the spdif input decoder of the axg SoC family
Signed-off-by: Jerome Brunet jbrunet@baylibre.com --- sound/soc/meson/Kconfig | 9 +- sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-spdifin.c | 521 ++++++++++++++++++++++++++++++++++ 3 files changed, 531 insertions(+), 1 deletion(-) create mode 100644 sound/soc/meson/axg-spdifin.c
diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index 8b8426ed2363..8779fe23671d 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -54,6 +54,7 @@ config SND_MESON_AXG_SOUND_CARD imply SND_MESON_AXG_TDMIN imply SND_MESON_AXG_TDMOUT imply SND_MESON_AXG_SPDIFOUT + imply SND_MESON_AXG_SPDIFIN imply SND_MESON_AXG_PDM help Select Y or M to add support for the AXG SoC sound card @@ -67,6 +68,13 @@ config SND_MESON_AXG_SPDIFOUT Select Y or M to add support for SPDIF output serializer embedded in the Amlogic AXG SoC family
+config SND_MESON_AXG_SPDIFIN + tristate "Amlogic AXG SPDIF Input Support" + imply SND_SOC_SPDIF + help + Select Y or M to add support for SPDIF input embedded + in the Amlogic AXG SoC family + config SND_MESON_AXG_PDM tristate "Amlogic AXG PDM Input Support" imply SND_SOC_DMIC @@ -74,5 +82,4 @@ config SND_MESON_AXG_PDM help Select Y or M to add support for PDM input embedded in the Amlogic AXG SoC family - endmenu diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index 4cd25104029d..b45dfb9e2f88 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -8,6 +8,7 @@ snd-soc-meson-axg-tdm-interface-objs := axg-tdm-interface.o snd-soc-meson-axg-tdmin-objs := axg-tdmin.o snd-soc-meson-axg-tdmout-objs := axg-tdmout.o snd-soc-meson-axg-sound-card-objs := axg-card.o +snd-soc-meson-axg-spdifin-objs := axg-spdifin.o snd-soc-meson-axg-spdifout-objs := axg-spdifout.o snd-soc-meson-axg-pdm-objs := axg-pdm.o
@@ -19,5 +20,6 @@ obj-$(CONFIG_SND_MESON_AXG_TDM_INTERFACE) += snd-soc-meson-axg-tdm-interface.o obj-$(CONFIG_SND_MESON_AXG_TDMIN) += snd-soc-meson-axg-tdmin.o obj-$(CONFIG_SND_MESON_AXG_TDMOUT) += snd-soc-meson-axg-tdmout.o obj-$(CONFIG_SND_MESON_AXG_SOUND_CARD) += snd-soc-meson-axg-sound-card.o +obj-$(CONFIG_SND_MESON_AXG_SPDIFIN) += snd-soc-meson-axg-spdifin.o obj-$(CONFIG_SND_MESON_AXG_SPDIFOUT) += snd-soc-meson-axg-spdifout.o obj-$(CONFIG_SND_MESON_AXG_PDM) += snd-soc-meson-axg-pdm.o diff --git a/sound/soc/meson/axg-spdifin.c b/sound/soc/meson/axg-spdifin.c new file mode 100644 index 000000000000..09f385a2bbba --- /dev/null +++ b/sound/soc/meson/axg-spdifin.c @@ -0,0 +1,521 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet jbrunet@baylibre.com + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/pcm_params.h> + +#define SPDIFIN_CTRL0 0x00 +#define SPDIFIN_CTRL0_EN BIT(31) +#define SPDIFIN_CTRL0_RST_OUT BIT(29) +#define SPDIFIN_CTRL0_RST_IN BIT(28) +#define SPDIFIN_CTRL0_WIDTH_SEL BIT(24) +#define SPDIFIN_CTRL0_STATUS_CH_SHIFT 11 +#define SPDIFIN_CTRL0_STATUS_SEL GENMASK(10, 8) +#define SPDIFIN_CTRL0_SRC_SEL GENMASK(5, 4) +#define SPDIFIN_CTRL0_CHK_VALID BIT(3) +#define SPDIFIN_CTRL1 0x04 +#define SPDIFIN_CTRL1_BASE_TIMER GENMASK(19, 0) +#define SPDIFIN_CTRL1_IRQ_MASK GENMASK(27, 20) +#define SPDIFIN_CTRL2 0x08 +#define SPDIFIN_THRES_PER_REG 3 +#define SPDIFIN_THRES_WIDTH 10 +#define SPDIFIN_CTRL3 0x0c +#define SPDIFIN_CTRL4 0x10 +#define SPDIFIN_TIMER_PER_REG 4 +#define SPDIFIN_TIMER_WIDTH 8 +#define SPDIFIN_CTRL5 0x14 +#define SPDIFIN_CTRL6 0x18 +#define SPDIFIN_STAT0 0x1c +#define SPDIFIN_STAT0_MODE GENMASK(30, 28) +#define SPDIFIN_STAT0_MAXW GENMASK(17, 8) +#define SPDIFIN_STAT0_IRQ GENMASK(7, 0) +#define SPDIFIN_IRQ_MODE_CHANGED BIT(2) +#define SPDIFIN_STAT1 0x20 +#define SPDIFIN_STAT2 0x24 +#define SPDIFIN_MUTE_VAL 0x28 + +#define SPDIFIN_MODE_NUM 7 + +struct axg_spdifin_cfg { + const unsigned int *mode_rates; + unsigned int ref_rate; +}; + +struct axg_spdifin { + const struct axg_spdifin_cfg *conf; + struct regmap *map; + struct clk *refclk; + struct clk *pclk; +}; + +/* + * TODO: + * It would have been nice to check the actual rate against the sample rate + * requested in hw_params(). Unfortunately, I was not able to make the mode + * detection and IRQ work reliably: + * + * 1. IRQs are generated on mode change only, so there is no notification + * on transition between no signal and mode 0 (32kHz). + * 2. Mode detection very often has glitches, and may detects the + * lowest or the highest mode before zeroing in on the actual mode. + * + * This makes calling snd_pcm_stop() difficult to get right. Even notifying + * the kcontrol would be very unreliable at this point. + * Let's keep things simple until the magic spell that makes this work is + * found. + */ + +static unsigned int axg_spdifin_get_rate(struct axg_spdifin *priv) +{ + unsigned int stat, mode, rate = 0; + + regmap_read(priv->map, SPDIFIN_STAT0, &stat); + mode = FIELD_GET(SPDIFIN_STAT0_MODE, stat); + + /* + * If max width is zero, we are not capturing anything. + * Also Sometimes, when the capture is on but there is no data, + * mode is SPDIFIN_MODE_NUM, but not always ... + */ + if (FIELD_GET(SPDIFIN_STAT0_MAXW, stat) && + mode < SPDIFIN_MODE_NUM) + rate = priv->conf->mode_rates[mode]; + + return rate; +} + +static int axg_spdifin_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); + + /* Apply both reset */ + regmap_update_bits(priv->map, SPDIFIN_CTRL0, + SPDIFIN_CTRL0_RST_OUT | + SPDIFIN_CTRL0_RST_IN, + 0); + + /* Clear out reset before in reset */ + regmap_update_bits(priv->map, SPDIFIN_CTRL0, + SPDIFIN_CTRL0_RST_OUT, SPDIFIN_CTRL0_RST_OUT); + regmap_update_bits(priv->map, SPDIFIN_CTRL0, + SPDIFIN_CTRL0_RST_IN, SPDIFIN_CTRL0_RST_IN); + + return 0; +} + +static int axg_spdifin_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); + int ret; + + ret = clk_prepare_enable(priv->refclk); + if (ret) { + dev_err(dai->dev, + "failed to enable spdifin reference clock\n"); + return ret; + } + + regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, + SPDIFIN_CTRL0_EN); + + return 0; +} + +static void axg_spdifin_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); + + regmap_update_bits(priv->map, SPDIFIN_CTRL0, SPDIFIN_CTRL0_EN, 0); + clk_disable_unprepare(priv->refclk); +} + +static void axg_spdifin_write_mode_param(struct regmap *map, int mode, + unsigned int val, + unsigned int num_per_reg, + unsigned int base_reg, + unsigned int width) +{ + unsigned int offset = mode, rem; + unsigned int reg, shift; + + rem = do_div(offset, num_per_reg); + + reg = offset * regmap_get_reg_stride(map) + base_reg; + shift = width * (num_per_reg - 1 - rem); + + regmap_update_bits(map, reg, GENMASK(width - 1, 0) << shift, + val << shift); +} + +static void axg_spdifin_write_timer(struct regmap *map, int mode, + unsigned int val) +{ + axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_TIMER_PER_REG, + SPDIFIN_CTRL4, SPDIFIN_TIMER_WIDTH); +} + +static void axg_spdifin_write_threshold(struct regmap *map, int mode, + unsigned int val) +{ + axg_spdifin_write_mode_param(map, mode, val, SPDIFIN_THRES_PER_REG, + SPDIFIN_CTRL2, SPDIFIN_THRES_WIDTH); +} + +static unsigned int axg_spdifin_mode_timer(struct axg_spdifin *priv, + int mode, + unsigned int rate) +{ + /* + * Number of period of the reference clock during a period of the + * input signal reference clock + */ + return rate / (128 * priv->conf->mode_rates[mode]); +} + +static int axg_spdifin_sample_mode_config(struct snd_soc_dai *dai, + struct axg_spdifin *priv) +{ + unsigned int rate, t_next; + int ret, i = SPDIFIN_MODE_NUM - 1; + + /* Set spdif input reference clock */ + ret = clk_set_rate(priv->refclk, priv->conf->ref_rate); + if (ret) { + dev_err(dai->dev, "reference clock rate set failed\n"); + return ret; + } + + /* + * The rate actually set might be slightly different, get + * the actual rate for the following mode calculation + */ + rate = clk_get_rate(priv->refclk); + + /* HW will update mode every 1ms */ + regmap_update_bits(priv->map, SPDIFIN_CTRL1, + SPDIFIN_CTRL1_BASE_TIMER, + FIELD_PREP(SPDIFIN_CTRL1_BASE_TIMER, rate / 1000)); + + /* Threshold based on the minimum width between two edges */ + regmap_update_bits(priv->map, SPDIFIN_CTRL0, + SPDIFIN_CTRL0_WIDTH_SEL, SPDIFIN_CTRL0_WIDTH_SEL); + + /* Calculate the last timer which has no threshold */ + t_next = axg_spdifin_mode_timer(priv, i, rate); + axg_spdifin_write_timer(priv->map, i, t_next); + + do { + unsigned int t; + + i -= 1; + + /* Calculate the timer */ + t = axg_spdifin_mode_timer(priv, i, rate); + + /* Set the timer value */ + axg_spdifin_write_timer(priv->map, i, t); + + /* Set the threshold value */ + axg_spdifin_write_threshold(priv->map, i, t + t_next); + + /* Save the current timer for the next threshold calculation */ + t_next = t; + + } while (i > 0); + + return 0; +} + +static int axg_spdifin_dai_probe(struct snd_soc_dai *dai) +{ + struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); + int ret; + + ret = clk_prepare_enable(priv->pclk); + if (ret) { + dev_err(dai->dev, "failed to enable pclk\n"); + return ret; + } + + ret = axg_spdifin_sample_mode_config(dai, priv); + if (ret) { + dev_err(dai->dev, "mode configuration failed\n"); + clk_disable_unprepare(priv->pclk); + return ret; + } + + return 0; +} + +static int axg_spdifin_dai_remove(struct snd_soc_dai *dai) +{ + struct axg_spdifin *priv = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(priv->pclk); + return 0; +} + +static const struct snd_soc_dai_ops axg_spdifin_ops = { + .prepare = axg_spdifin_prepare, + .startup = axg_spdifin_startup, + .shutdown = axg_spdifin_shutdown, +}; + +static int axg_spdifin_iec958_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958; + uinfo->count = 1; + + return 0; +} + +static int axg_spdifin_get_status_mask(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + int i; + + for (i = 0; i < 24; i++) + ucontrol->value.iec958.status[i] = 0xff; + + return 0; +} + +static int axg_spdifin_get_status(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *c = snd_kcontrol_chip(kcontrol); + struct axg_spdifin *priv = snd_soc_component_get_drvdata(c); + int i, j; + + for (i = 0; i < 6; i++) { + unsigned int val; + + regmap_update_bits(priv->map, SPDIFIN_CTRL0, + SPDIFIN_CTRL0_STATUS_SEL, + FIELD_PREP(SPDIFIN_CTRL0_STATUS_SEL, i)); + + regmap_read(priv->map, SPDIFIN_STAT1, &val); + + for (j = 0; j < 4; j++) { + unsigned int offset = i * 4 + j; + + ucontrol->value.iec958.status[offset] = + (val >> (j * 8)) & 0xff; + } + } + + return 0; +} + +#define AXG_SPDIFIN_IEC958_MASK \ + { \ + .access = SNDRV_CTL_ELEM_ACCESS_READ, \ + .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ + .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK), \ + .info = axg_spdifin_iec958_info, \ + .get = axg_spdifin_get_status_mask, \ + } + +#define AXG_SPDIFIN_IEC958_STATUS \ + { \ + .access = (SNDRV_CTL_ELEM_ACCESS_READ | \ + SNDRV_CTL_ELEM_ACCESS_VOLATILE), \ + .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ + .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE), \ + .info = axg_spdifin_iec958_info, \ + .get = axg_spdifin_get_status, \ + } + +static const char * const spdifin_chsts_src_texts[] = { + "A", "B", +}; + +static SOC_ENUM_SINGLE_DECL(axg_spdifin_chsts_src_enum, SPDIFIN_CTRL0, + SPDIFIN_CTRL0_STATUS_CH_SHIFT, + spdifin_chsts_src_texts); + +static int axg_spdifin_rate_lock_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 192000; + + return 0; +} + +static int axg_spdifin_rate_lock_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *c = snd_kcontrol_chip(kcontrol); + struct axg_spdifin *priv = snd_soc_component_get_drvdata(c); + + ucontrol->value.integer.value[0] = axg_spdifin_get_rate(priv); + + return 0; +} + +#define AXG_SPDIFIN_LOCK_RATE(xname) \ + { \ + .iface = SNDRV_CTL_ELEM_IFACE_PCM, \ + .access = (SNDRV_CTL_ELEM_ACCESS_READ | \ + SNDRV_CTL_ELEM_ACCESS_VOLATILE), \ + .get = axg_spdifin_rate_lock_get, \ + .info = axg_spdifin_rate_lock_info, \ + .name = xname, \ + } + +static const struct snd_kcontrol_new axg_spdifin_controls[] = { + AXG_SPDIFIN_LOCK_RATE("Capture Rate Lock"), + SOC_DOUBLE("Capture Switch", SPDIFIN_CTRL0, 7, 6, 1, 1), + SOC_ENUM(SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Src", + axg_spdifin_chsts_src_enum), + AXG_SPDIFIN_IEC958_MASK, + AXG_SPDIFIN_IEC958_STATUS, +}; + +static const struct snd_soc_component_driver axg_spdifin_component_drv = { + .controls = axg_spdifin_controls, + .num_controls = ARRAY_SIZE(axg_spdifin_controls), +}; + +static const struct regmap_config axg_spdifin_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = SPDIFIN_MUTE_VAL, +}; + +static const unsigned int axg_spdifin_mode_rates[SPDIFIN_MODE_NUM] = { + 32000, 44100, 48000, 88200, 96000, 176400, 192000, +}; + +static const struct axg_spdifin_cfg axg_cfg = { + .mode_rates = axg_spdifin_mode_rates, + .ref_rate = 333333333, +}; + +static const struct of_device_id axg_spdifin_of_match[] = { + { + .compatible = "amlogic,axg-spdifin", + .data = &axg_cfg, + }, {} +}; +MODULE_DEVICE_TABLE(of, axg_spdifin_of_match); + +static struct snd_soc_dai_driver * +axg_spdifin_get_dai_drv(struct device *dev, struct axg_spdifin *priv) +{ + struct snd_soc_dai_driver *drv; + int i; + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return ERR_PTR(-ENOMEM); + + drv->name = "SPDIF Input"; + drv->ops = &axg_spdifin_ops; + drv->probe = axg_spdifin_dai_probe; + drv->remove = axg_spdifin_dai_remove; + drv->capture.stream_name = "Capture"; + drv->capture.channels_min = 1; + drv->capture.channels_max = 2; + drv->capture.formats = SNDRV_PCM_FMTBIT_IEC958_SUBFRAME_LE; + + for (i = 0; i < SPDIFIN_MODE_NUM; i++) { + unsigned int rb = + snd_pcm_rate_to_rate_bit(priv->conf->mode_rates[i]); + + if (rb == SNDRV_PCM_RATE_KNOT) + return ERR_PTR(-EINVAL); + + drv->capture.rates |= rb; + } + + return drv; +} + +static int axg_spdifin_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct axg_spdifin *priv; + struct snd_soc_dai_driver *dai_drv; + struct resource *res; + void __iomem *regs; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + platform_set_drvdata(pdev, priv); + + priv->conf = of_device_get_match_data(dev); + if (!priv->conf) { + dev_err(dev, "failed to match device\n"); + return -ENODEV; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + priv->map = devm_regmap_init_mmio(dev, regs, &axg_spdifin_regmap_cfg); + if (IS_ERR(priv->map)) { + dev_err(dev, "failed to init regmap: %ld\n", + PTR_ERR(priv->map)); + return PTR_ERR(priv->map); + } + + priv->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(priv->pclk)) { + ret = PTR_ERR(priv->pclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get pclk: %d\n", ret); + return ret; + } + + priv->refclk = devm_clk_get(dev, "refclk"); + if (IS_ERR(priv->refclk)) { + ret = PTR_ERR(priv->refclk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get mclk: %d\n", ret); + return ret; + } + + dai_drv = axg_spdifin_get_dai_drv(dev, priv); + if (IS_ERR(dai_drv)) { + dev_err(dev, "failed to get dai driver: %ld\n", + PTR_ERR(dai_drv)); + return PTR_ERR(dai_drv); + } + + return devm_snd_soc_register_component(dev, &axg_spdifin_component_drv, + dai_drv, 1); +} + +static struct platform_driver axg_spdifin_pdrv = { + .probe = axg_spdifin_probe, + .driver = { + .name = "axg-spdifin", + .of_match_table = axg_spdifin_of_match, + }, +}; +module_platform_driver(axg_spdifin_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG SPDIF Input driver"); +MODULE_AUTHOR("Jerome Brunet jbrunet@baylibre.com"); +MODULE_LICENSE("GPL v2");