Re: [alsa-devel] [PATCH v3 03/17] mfd: madera: Add common support for Cirrus Logic Madera codecs

On Fri, 02 Jun 2017, Richard Fitzgerald wrote:

This adds the generic core support for Cirrus Logic "Madera" class codecs. These are complex audio codec SoCs with a variety of digital and analogue I/O, onboard audio processing and DSPs, and other features.

These codecs are all based off a common set of hardware IP so can be supported by a core of common code (with a few minor device-to-device variations).

Signed-off-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com Signed-off-by: Nikesh Oswal Nikesh.Oswal@wolfsonmicro.com Signed-off-by: Richard Fitzgerald rf@opensource.wolfsonmicro.com

---

Changes since V2:

• Removed child DT nodes and of_compatibles to make the DT flat
• Rearranged the selects in the Kconfig

MAINTAINERS | 3 + drivers/mfd/Kconfig | 25 ++ drivers/mfd/Makefile | 4 + drivers/mfd/madera-core.c | 632 +++++++++++++++++++++++++++++++++++++++ drivers/mfd/madera-i2c.c | 131 ++++++++ drivers/mfd/madera-spi.c | 132 ++++++++ drivers/mfd/madera.h | 52 ++++ include/linux/mfd/madera/core.h | 180 +++++++++++ include/linux/mfd/madera/pdata.h | 61 ++++ 9 files changed, 1220 insertions(+) create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h

diff --git a/MAINTAINERS b/MAINTAINERS index 4822ba4..5d2da16e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3314,7 +3314,10 @@ L: patches@opensource.wolfsonmicro.com T: git https://github.com/CirrusLogic/linux-drivers.git W: https://github.com/CirrusLogic/linux-drivers/wiki S: Supported +F: Documentation/devicetree/bindings/mfd/madera.txt F: include/linux/mfd/madera/* +F: drivers/mfd/madera* +F: drivers/mfd/cs47l*

CLEANCACHE API M: Konrad Rzeszutek Wilk konrad.wilk@oracle.com diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index aedeeff..f027b9f 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -203,6 +203,31 @@ config MFD_CROS_EC_SPI response time cannot be guaranteed, we support ignoring 'pre-amble' bytes before the response actually starts.

+config MFD_MADERA

• bool
• select MFD_CORE
• select REGMAP
• select REGMAP_IRQ
• select MADERA_IRQ

+config MFD_MADERA_I2C

• bool "Cirrus Logic Madera codecs with I2C"
• select MFD_MADERA
• select REGMAP_I2C
• depends on I2C
• help

•  Support for the Cirrus Logic Madera platform audio SoC
  

•  core functionality controlled via I2C.
  

+config MFD_MADERA_SPI

• bool "Cirrus Logic Madera codecs with SPI"
• select MFD_MADERA
• select REGMAP_SPI
• depends on SPI_MASTER
• help

•  Support for the Cirrus Logic Madera platform audio SoC
  

•  core functionality controlled via SPI.
  

config MFD_ASIC3 bool "Compaq ASIC3" depends on GPIOLIB && ARM diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index c16bf1e..38b1514 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -72,6 +72,10 @@ obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_MFD_WM8994) += wm8994.o

+obj-$(CONFIG_MFD_MADERA) += madera-core.o +obj-$(CONFIG_MFD_MADERA_I2C) += madera-i2c.o +obj-$(CONFIG_MFD_MADERA_SPI) += madera-spi.o

obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_TPS6507X) += tps6507x.o diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c new file mode 100644 index 0000000..a5e4cda --- /dev/null +++ b/drivers/mfd/madera-core.c @@ -0,0 +1,632 @@ +/*

• • Core MFD support for Cirrus Logic Madera codecs
• • Copyright 2015-2017 Cirrus Logic
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#include <linux/device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/notifier.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/of_regulator.h>

+#include <linux/mfd/madera/core.h> +#include <linux/mfd/madera/registers.h>

+#include "madera.h"

+#define CS47L35_SILICON_ID 0x6360 +#define CS47L85_SILICON_ID 0x6338 +#define CS47L90_SILICON_ID 0x6364

+#define MADERA_32KZ_MCLK2 1

+static const char * const madera_core_supplies[] = {

• "AVDD",
• "DBVDD1",

+};

+static const struct mfd_cell madera_ldo1_devs[] = {

• { .name = "madera-ldo1" },

+};

+static const char * const cs47l35_supplies[] = {

• "MICVDD",
• "DBVDD2",
• "CPVDD1",
• "CPVDD2",
• "SPKVDD",

+};

+static const struct mfd_cell cs47l35_devs[] = {

• { .name = "madera-pinctrl", },
• { .name = "madera-irq", },
• { .name = "madera-micsupp", },
• { .name = "madera-gpio", },
• { .name = "madera-extcon", },
• {

• .name = "cs47l35-codec",
  

• .parent_supplies = cs47l35_supplies,
  

• .num_parent_supplies = ARRAY_SIZE(cs47l35_supplies),
  

• },

+};

+static const char * const cs47l85_supplies[] = {

• "MICVDD",
• "DBVDD2",
• "DBVDD3",
• "DBVDD4",
• "CPVDD1",
• "CPVDD2",
• "SPKVDDL",
• "SPKVDDR",

+};

+static const struct mfd_cell cs47l85_devs[] = {

• { .name = "madera-pinctrl", },
• { .name = "madera-irq", },
• { .name = "madera-micsupp" },
• { .name = "madera-gpio", },
• { .name = "madera-extcon", },
• {

• .name = "cs47l85-codec",
  

• .parent_supplies = cs47l85_supplies,
  

• .num_parent_supplies = ARRAY_SIZE(cs47l85_supplies),
  

• },

+};

+static const char * const cs47l90_supplies[] = {

• "MICVDD",
• "DBVDD2",
• "DBVDD3",
• "DBVDD4",
• "CPVDD1",
• "CPVDD2",

+};

+static const struct mfd_cell cs47l90_devs[] = {

• { .name = "madera-pinctrl", },
• { .name = "madera-irq", },
• { .name = "madera-micsupp", },
• { .name = "madera-gpio", },
• { .name = "madera-extcon", },
• {

• .name = "cs47l90-codec",
  

• .parent_supplies = cs47l90_supplies,
  

• .num_parent_supplies = ARRAY_SIZE(cs47l90_supplies),
  

• },

+};

+const char *madera_name_from_type(enum madera_type type) +{

• switch (type) {
• case CS47L35:

• return "CS47L35";
  

• case CS47L85:

• return "CS47L85";
  

• case CS47L90:

• return "CS47L90";
  

• case CS47L91:

• return "CS47L91";
  

• case WM1840:

• return "WM1840";
  

• default:

• return "Unknown";
  

• }

+}

Instead of having 4 of these switch statements, can't you have 1 and set a bunch of structure attributes which you can reference later?

If you then pass a pointer to that structure to the child devices, you can also rid a couple of these nasty globally callable functions.

+EXPORT_SYMBOL_GPL(madera_name_from_type);

+#define MADERA_BOOT_POLL_MAX_INTERVAL_US 5000 +#define MADERA_BOOT_POLL_TIMEOUT_US 25000

+static int madera_wait_for_boot(struct madera *madera) +{

• unsigned int val;
• int ret;
• /*

• * We can't use an interrupt as we need to runtime resume to do so,
  

• * so we poll the status bit. This won't race with the interrupt
  

• * handler because it will be blocked on runtime resume.
  

• */
  

• ret = regmap_read_poll_timeout(madera->regmap,

• 		       MADERA_IRQ1_RAW_STATUS_1,
  

• 		       val,
  

• 		       (val & MADERA_BOOT_DONE_STS1),
  

• 		       MADERA_BOOT_POLL_MAX_INTERVAL_US,
  

• 		       MADERA_BOOT_POLL_TIMEOUT_US);
  

• if (ret)

• dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
  

• /*

• * BOOT_DONE defaults to unmasked on boot so we must ack it.
  

• * Do this unconditionally to avoid interrupt storms
  

• */
  

• regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,

•      MADERA_BOOT_DONE_EINT1);
  

• pm_runtime_mark_last_busy(madera->dev);
• return ret;

+}

+static int madera_soft_reset(struct madera *madera) +{

• int ret;
• ret = regmap_write(madera->regmap, MADERA_SOFTWARE_RESET, 0);
• if (ret != 0) {

• dev_err(madera->dev, "Failed to soft reset device: %d\n", ret);
  

• return ret;
  

• }
• /* Allow time for internal clocks to startup after reset */
• usleep_range(1000, 2000);
• return 0;

+}

+static void madera_enable_hard_reset(struct madera *madera) +{

• if (madera->reset_gpio)

• gpiod_set_value_cansleep(madera->reset_gpio, 0);
  

+}

+static void madera_disable_hard_reset(struct madera *madera) +{

• if (madera->reset_gpio) {

• gpiod_set_value_cansleep(madera->reset_gpio, 1);
  

• usleep_range(1000, 2000);
  

• }

+}

+#ifdef CONFIG_PM +static int madera_runtime_resume(struct device *dev) +{

• struct madera *madera = dev_get_drvdata(dev);
• int ret;
• dev_dbg(dev, "Leaving sleep mode\n");

Consider dropping this.

• ret = regulator_enable(madera->dcvdd);
• if (ret) {

• dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
  

• return ret;
  

• }
• regcache_cache_only(madera->regmap, false);
• regcache_cache_only(madera->regmap_32bit, false);
• ret = madera_wait_for_boot(madera);
• if (ret)

• goto err;
  

• ret = regcache_sync(madera->regmap);
• if (ret) {

• dev_err(dev, "Failed to restore 16-bit register cache\n");
  

• goto err;
  

• }
• ret = regcache_sync(madera->regmap_32bit);
• if (ret) {

• dev_err(dev, "Failed to restore 32-bit register cache\n");
  

• goto err;
  

• }
• return 0;

+err:

• regcache_cache_only(madera->regmap_32bit, true);
• regcache_cache_only(madera->regmap, true);
• regulator_disable(madera->dcvdd);
• return ret;

+}

+static int madera_runtime_suspend(struct device *dev) +{

• struct madera *madera = dev_get_drvdata(dev);
• dev_dbg(madera->dev, "Entering sleep mode\n");

... and this.

• regcache_cache_only(madera->regmap, true);
• regcache_mark_dirty(madera->regmap);
• regcache_cache_only(madera->regmap_32bit, true);
• regcache_mark_dirty(madera->regmap_32bit);
• regulator_disable(madera->dcvdd);
• return 0;

+} +#endif

+const struct dev_pm_ops madera_pm_ops = {

• SET_RUNTIME_PM_OPS(madera_runtime_suspend,

• 	   madera_runtime_resume,
  

• 	   NULL)
  

+}; +EXPORT_SYMBOL_GPL(madera_pm_ops);

+unsigned int madera_get_num_micbias(struct madera *madera) +{

• switch (madera->type) {
• case CS47L35:

• return 2;
  

• case CS47L85:
• case WM1840:

• return 4;
  

• case CS47L90:
• case CS47L91:

• return 2;
  

Why don't you group this with CS47L35?

• default:

• dev_warn(madera->dev, "No micbias known for codec %s\n",
  

• 	 madera_name_from_type(madera->type));
  

• return 0;
  

• }

+} +EXPORT_SYMBOL_GPL(madera_get_num_micbias);

+unsigned int madera_get_num_childbias(struct madera *madera,

• 		      unsigned int micbias)
  

+{

• /*

• * micbias argument reserved for future codecs that don't
  

• * have the same number of children on each micbias
  

• */
  

• switch (madera->type) {
• case CS47L35:

• return 2;
  

• case CS47L85:
• case WM1840:

• return 0;
  

• case CS47L90:
• case CS47L91:

• return 4;
  

• default:

• dev_warn(madera->dev, "No child micbias known for codec %s\n",
  

• 	 madera_name_from_type(madera->type));
  

• return 0;
  

• }

+} +EXPORT_SYMBOL_GPL(madera_get_num_childbias);

+#ifdef CONFIG_OF +const struct of_device_id madera_of_match[] = {

• { .compatible = "cirrus,cs47l35", .data = (void *)CS47L35 },
• { .compatible = "cirrus,cs47l85", .data = (void *)CS47L85 },
• { .compatible = "cirrus,cs47l90", .data = (void *)CS47L90 },
• { .compatible = "cirrus,cs47l91", .data = (void *)CS47L91 },
• { .compatible = "cirrus,wm1840", .data = (void *)WM1840 },
• {},

+}; +EXPORT_SYMBOL_GPL(madera_of_match);

+unsigned long madera_get_type_from_of(struct device *dev) +{

• const struct of_device_id *id = of_match_device(madera_of_match, dev);
• if (id)

• return (unsigned long)id->data;
  

• else

• return 0;
  

+} +EXPORT_SYMBOL_GPL(madera_get_type_from_of); +#endif

+static int madera_get_reset_gpio(struct madera *madera) +{

• int ret;
• /* We use 0 in pdata to indicate a GPIO has not been set */
• if (dev_get_platdata(madera->dev) && (madera->pdata.reset > 0)) {

• /* Start out with /RESET asserted */
  

• ret = devm_gpio_request_one(madera->dev,
  

• 			    madera->pdata.reset,
  

• 			    GPIOF_DIR_OUT | GPIOF_INIT_LOW,
  

• 			    "madera reset");
  

• if (!ret)
  

• 	madera->reset_gpio = gpio_to_desc(madera->pdata.reset);
  

• } else {

• madera->reset_gpio = devm_gpiod_get_optional(madera->dev,
  

• 					     "reset",
  

• 					     GPIOD_OUT_LOW);
  

• if (IS_ERR(madera->reset_gpio))
  

• 	ret = PTR_ERR(madera->reset_gpio);
  

• else
  

• 	ret = 0;
  

If you pre-initialise ret, you can drop the else.

• }
• if (ret == -EPROBE_DEFER)

• return ret;
  

• if (ret) {

• dev_err(madera->dev, "Failed to request /RESET: %d\n", ret);
  

• return ret;
  

• }
• if (!madera->reset_gpio)

• dev_warn(madera->dev,
  

• 	 "Running without reset GPIO is not recommended\n");
  

• return 0;

+}

+int madera_dev_init(struct madera *madera) +{

• struct device *dev = madera->dev;
• const char *name;
• unsigned int hwid;
• int (*patch_fn)(struct madera *) = NULL;
• const struct mfd_cell *mfd_devs;
• int n_devs = 0;
• int i, ret;
• dev_set_drvdata(madera->dev, madera);
• BLOCKING_INIT_NOTIFIER_HEAD(&madera->notifier);
• if (dev_get_platdata(madera->dev)) {

• memcpy(&madera->pdata, dev_get_platdata(madera->dev),
  

•        sizeof(madera->pdata));
  

• }
• ret = madera_get_reset_gpio(madera);
• if (ret)

• return ret;
  

• regcache_cache_only(madera->regmap, true);
• regcache_cache_only(madera->regmap_32bit, true);
• for (i = 0; i < ARRAY_SIZE(madera_core_supplies); i++)

• madera->core_supplies[i].supply = madera_core_supplies[i];
  

• madera->num_core_supplies = ARRAY_SIZE(madera_core_supplies);
• switch (madera->type) {
• case CS47L35:
• case CS47L90:
• case CS47L91:

• break;
  

• case CS47L85:
• case WM1840:

• /* On these DCVDD could be supplied from the onboard LDO1 */
  

• ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,
  

• 		      madera_ldo1_devs,
  

• 		      ARRAY_SIZE(madera_ldo1_devs),
  

• 		      NULL, 0, NULL);
  

• if (ret) {
  

• 	dev_err(dev, "Failed to add LDO1 child: %d\n", ret);
  

• 	return ret;
  

• }
  

• break;
  

• default:

• dev_err(madera->dev, "Unknown device type %d\n", madera->type);
  

• return -ENODEV;
  

• }

We already check the validity of the current device type. Thus it would be simpler to represent the above code as an if ().

• ret = devm_regulator_bulk_get(dev, madera->num_core_supplies,

• 		      madera->core_supplies);
  

• if (ret) {

• dev_err(dev, "Failed to request core supplies: %d\n", ret);
  

• goto err_devs;
  

• }
• /*

• * Don't use devres here because the only device we have to get
  

• * against is the MFD device and DCVDD will likely be supplied by
  

• * one of its children. Meaning that the regulator will be
  

• * destroyed by the time devres calls regulator put.
  

• */
  

• madera->dcvdd = regulator_get_exclusive(madera->dev, "DCVDD");
• if (IS_ERR(madera->dcvdd)) {

• ret = PTR_ERR(madera->dcvdd);
  

• dev_err(dev, "Failed to request DCVDD: %d\n", ret);
  

• goto err_devs;
  

• }
• ret = regulator_bulk_enable(madera->num_core_supplies,

• 		    madera->core_supplies);
  

• if (ret) {

• dev_err(dev, "Failed to enable core supplies: %d\n", ret);
  

• goto err_dcvdd;
  

• }
• ret = regulator_enable(madera->dcvdd);
• if (ret) {

• dev_err(dev, "Failed to enable DCVDD: %d\n", ret);
  

• goto err_enable;
  

• }
• madera_disable_hard_reset(madera);
• regcache_cache_only(madera->regmap, false);
• regcache_cache_only(madera->regmap_32bit, false);
• /*

• * Verify that this is a chip we know about before we
  

• * starting doing any writes to its registers
  

• */
  

• ret = regmap_read(madera->regmap, MADERA_SOFTWARE_RESET, &hwid);
• if (ret) {

• dev_err(dev, "Failed to read ID register: %d\n", ret);
  

• goto err_reset;
  

• }
• switch (hwid) {
• case CS47L35_SILICON_ID:
• case CS47L85_SILICON_ID:
• case CS47L90_SILICON_ID:

• break;
  

• default:

• dev_err(madera->dev, "Unknown device ID: %x\n", hwid);
  

• ret = -EINVAL;
  

• goto err_reset;
  

• }
• /* If we don't have a reset GPIO use a soft reset */
• if (!madera->reset_gpio) {

• ret = madera_soft_reset(madera);
  

• if (ret)
  

• 	goto err_reset;
  

• }
• ret = madera_wait_for_boot(madera);
• if (ret) {

• dev_err(madera->dev, "Device failed initial boot: %d\n", ret);
  

• goto err_reset;
  

• }
• ret = regmap_read(madera->regmap, MADERA_HARDWARE_REVISION,

• 	  &madera->rev);
  

• if (ret) {

• dev_err(dev, "Failed to read revision register: %d\n", ret);
  

• goto err_reset;
  

• }
• madera->rev &= MADERA_HW_REVISION_MASK;
• name = madera_name_from_type(madera->type);
• switch (hwid) {
• case CS47L35_SILICON_ID:

• if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
  

• 	switch (madera->type) {
  

• 	case CS47L35:
  

• 		patch_fn = cs47l35_patch;
  

• 		mfd_devs = cs47l35_devs;
  

• 		n_devs = ARRAY_SIZE(cs47l35_devs);
  

• 		break;
  

• 	default:
  

• 		break;
  

• 	}
  

• }
  

• break;
  

• case CS47L85_SILICON_ID:

• if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
  

• 	switch (madera->type) {
  

• 	case CS47L85:
  

• 	case WM1840:
  

• 		patch_fn = cs47l85_patch;
  

• 		mfd_devs = cs47l85_devs;
  

• 		n_devs = ARRAY_SIZE(cs47l85_devs);
  

• 		break;
  

• 	default:
  

• 		break;
  

• 	}
  

• }
  

• break;
  

• case CS47L90_SILICON_ID:

• if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
  

• 	switch (madera->type) {
  

• 	case CS47L90:
  

• 	case CS47L91:
  

• 		patch_fn = cs47l90_patch;
  

• 		mfd_devs = cs47l90_devs;
  

• 		n_devs = ARRAY_SIZE(cs47l90_devs);
  

• 		break;
  

• 	default:
  

• 		break;
  

• 	}
  

• }
  

• break;
  

• default:

• break;
  

• }

You have this switch statement twice. Please merge the 2.

• if (!n_devs) {

• dev_err(madera->dev, "Device ID 0x%x not a %s\n", hwid, name);
  

• ret = -ENODEV;
  

• goto err_reset;
  

• }
• dev_info(dev, "%s silicon revision %d\n", name, madera->rev);
• /* Apply hardware patch */
• if (patch_fn) {

• ret = patch_fn(madera);
  

• if (ret) {
  

• 	dev_err(madera->dev, "Failed to apply patch %d\n", ret);
  

• 	goto err_reset;
  

• }
  

• }
• /* Init 32k clock sourced from MCLK2 */
• ret = regmap_update_bits(madera->regmap,

• 	MADERA_CLOCK_32K_1,
  

• 	MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
  

• 	MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
  

• if (ret) {

• dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
  

• goto err_reset;
  

• }
• pm_runtime_set_active(madera->dev);
• pm_runtime_enable(madera->dev);
• pm_runtime_set_autosuspend_delay(madera->dev, 100);
• pm_runtime_use_autosuspend(madera->dev);
• ret = mfd_add_devices(madera->dev, PLATFORM_DEVID_NONE,

• 	      mfd_devs, n_devs,
  

• 	      NULL, 0, NULL);
  

• if (ret) {

• dev_err(madera->dev, "Failed to add subdevices: %d\n", ret);
  

• goto err_pm_runtime;
  

• }
• return 0;

+err_pm_runtime:

• pm_runtime_disable(madera->dev);

+err_reset:

• madera_enable_hard_reset(madera);
• regulator_disable(madera->dcvdd);

+err_enable:

• regulator_bulk_disable(madera->num_core_supplies,

• 	       madera->core_supplies);
  

+err_dcvdd:

• regulator_put(madera->dcvdd);

+err_devs:

• mfd_remove_devices(dev);
• return ret;

+} +EXPORT_SYMBOL_GPL(madera_dev_init);

+int madera_dev_exit(struct madera *madera) +{

• /* Prevent any IRQs being serviced while we clean up */
• disable_irq(madera->irq);
• /*

• * DCVDD could be supplied by a child node, we must disable it before
  

• * removing the children, and prevent PM runtime from turning it back on
  

• */
  

• pm_runtime_disable(madera->dev);
• regulator_disable(madera->dcvdd);
• regulator_put(madera->dcvdd);
• mfd_remove_devices(madera->dev);
• madera_enable_hard_reset(madera);
• regulator_bulk_disable(madera->num_core_supplies,

• 	       madera->core_supplies);
  

• return 0;

+} +EXPORT_SYMBOL_GPL(madera_dev_exit); diff --git a/drivers/mfd/madera-i2c.c b/drivers/mfd/madera-i2c.c new file mode 100644 index 0000000..20e4cd4 --- /dev/null +++ b/drivers/mfd/madera-i2c.c @@ -0,0 +1,131 @@ +/*

• • I2C bus interface to Cirrus Logic Madera codecs
• • Copyright 2015-2017 Cirrus Logic
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#include <linux/device.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of.h>

+#include <linux/mfd/madera/core.h>

+#include "madera.h"

+static int madera_i2c_probe(struct i2c_client *i2c,

• 	    const struct i2c_device_id *id)
  

+{

• struct madera *madera;
• const struct regmap_config *regmap_16bit_config = NULL;
• const struct regmap_config *regmap_32bit_config = NULL;
• unsigned long type;
• int ret;
• if (i2c->dev.of_node)

• type = madera_get_type_from_of(&i2c->dev);
  

• else

• type = id->driver_data;
  

• switch (type) {
• case CS47L35:

• if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
  

• 	regmap_16bit_config = &cs47l35_16bit_i2c_regmap;
  

• 	regmap_32bit_config = &cs47l35_32bit_i2c_regmap;
  

• }
  

• break;
  

• case CS47L85:
• case WM1840:

• if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
  

• 	regmap_16bit_config = &cs47l85_16bit_i2c_regmap;
  

• 	regmap_32bit_config = &cs47l85_32bit_i2c_regmap;
  

• }
  

• break;
  

• case CS47L90:
• case CS47L91:

• if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
  

• 	regmap_16bit_config = &cs47l90_16bit_i2c_regmap;
  

• 	regmap_32bit_config = &cs47l90_32bit_i2c_regmap;
  

• }
  

• break;
  

• default:

• dev_err(&i2c->dev,
  

• 	"Unknown Madera I2C device type %ld\n", type);
  

• return -EINVAL;
  

• }
• if (!regmap_16bit_config) {

• dev_err(&i2c->dev,
  

• 	"Kernel does not include support for %s\n",
  

• 	madera_name_from_type(type));
  

• return -EINVAL;
  

• }
• madera = devm_kzalloc(&i2c->dev, sizeof(*madera), GFP_KERNEL);
• if (!madera)

• return -ENOMEM;
  

• madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
• if (IS_ERR(madera->regmap)) {

• ret = PTR_ERR(madera->regmap);
  

• dev_err(&i2c->dev,
  

• 	"Failed to allocate 16-bit register map: %d\n",	ret);
  

• return ret;
  

• }
• madera->regmap_32bit = devm_regmap_init_i2c(i2c, regmap_32bit_config);
• if (IS_ERR(madera->regmap_32bit)) {

• ret = PTR_ERR(madera->regmap_32bit);
  

• dev_err(&i2c->dev,
  

• 	"Failed to allocate 32-bit register map: %d\n", ret);
  

• return ret;
  

• }
• madera->type = type;
• madera->dev = &i2c->dev;
• madera->irq = i2c->irq;
• return madera_dev_init(madera);

+}

+static int madera_i2c_remove(struct i2c_client *i2c) +{

• struct madera *madera = dev_get_drvdata(&i2c->dev);
• madera_dev_exit(madera);
• return 0;

+}

+static const struct i2c_device_id madera_i2c_id[] = {

• { "cs47l35", CS47L35 },
• { "cs47l85", CS47L85 },
• { "cs47l90", CS47L90 },
• { "cs47l91", CS47L91 },
• { "wm1840", WM1840 },
• { }

+}; +MODULE_DEVICE_TABLE(i2c, madera_i2c_id);

+static struct i2c_driver madera_i2c_driver = {

• .driver = {

• .name	= "madera",
  

• .pm	= &madera_pm_ops,
  

• .of_match_table	= of_match_ptr(madera_of_match),
  

• },
• .probe = madera_i2c_probe,
• .remove = madera_i2c_remove,
• .id_table = madera_i2c_id,

+};

+module_i2c_driver(madera_i2c_driver);

+MODULE_DESCRIPTION("Madera I2C bus interface"); +MODULE_AUTHOR("Richard Fitzgerald rf@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/madera-spi.c b/drivers/mfd/madera-spi.c new file mode 100644 index 0000000..375bb36 --- /dev/null +++ b/drivers/mfd/madera-spi.c @@ -0,0 +1,132 @@ +/*

• • SPI bus interface to Cirrus Logic Madera codecs
• • Copyright 2015-2017 Cirrus Logic
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#include <linux/device.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/spi/spi.h>

+#include <linux/mfd/madera/core.h>

+#include "madera.h"

+static int madera_spi_probe(struct spi_device *spi) +{

• const struct spi_device_id *id = spi_get_device_id(spi);
• struct madera *madera;
• const struct regmap_config *regmap_16bit_config = NULL;
• const struct regmap_config *regmap_32bit_config = NULL;
• unsigned long type;
• int ret;
• if (spi->dev.of_node)

• type = madera_get_type_from_of(&spi->dev);
  

• else

• type = id->driver_data;
  

• switch (type) {
• case CS47L35:

• if (IS_ENABLED(CONFIG_MFD_CS47L35)) {
  

• 	regmap_16bit_config = &cs47l35_16bit_spi_regmap;
  

• 	regmap_32bit_config = &cs47l35_32bit_spi_regmap;
  

• }
  

• break;
  

• case CS47L85:
• case WM1840:

• if (IS_ENABLED(CONFIG_MFD_CS47L85)) {
  

• 	regmap_16bit_config = &cs47l85_16bit_spi_regmap;
  

• 	regmap_32bit_config = &cs47l85_32bit_spi_regmap;
  

• }
  

• break;
  

• case CS47L90:
• case CS47L91:

• if (IS_ENABLED(CONFIG_MFD_CS47L90)) {
  

• 	regmap_16bit_config = &cs47l90_16bit_spi_regmap;
  

• 	regmap_32bit_config = &cs47l90_32bit_spi_regmap;
  

• }
  

• break;
  

• default:

• dev_err(&spi->dev,
  

• 	"Unknown Madera SPI device type %ld\n", type);
  

• return -EINVAL;
  

• }
• if (!regmap_16bit_config) {

• dev_err(&spi->dev,
  

• 	"Kernel does not include support for %s\n",
  

• 	madera_name_from_type(type));
  

• return -EINVAL;
  

• }
• madera = devm_kzalloc(&spi->dev, sizeof(*madera), GFP_KERNEL);
• if (!madera)

• return -ENOMEM;
  

• madera->regmap = devm_regmap_init_spi(spi, regmap_16bit_config);
• if (IS_ERR(madera->regmap)) {

• ret = PTR_ERR(madera->regmap);
  

• dev_err(&spi->dev,
  

• 	"Failed to allocate 16-bit register map: %d\n",	ret);
  

• return ret;
  

• }
• madera->regmap_32bit = devm_regmap_init_spi(spi, regmap_32bit_config);
• if (IS_ERR(madera->regmap_32bit)) {

• ret = PTR_ERR(madera->regmap_32bit);
  

• dev_err(&spi->dev,
  

• 	"Failed to allocate 32-bit register map: %d\n",	ret);
  

• return ret;
  

• }
• madera->type = type;
• madera->dev = &spi->dev;
• madera->irq = spi->irq;
• return madera_dev_init(madera);

+}

+static int madera_spi_remove(struct spi_device *spi) +{

• struct madera *madera = spi_get_drvdata(spi);
• madera_dev_exit(madera);
• return 0;

+}

+static const struct spi_device_id madera_spi_ids[] = {

• { "cs47l35", CS47L35 },
• { "cs47l85", CS47L85 },
• { "cs47l90", CS47L90 },
• { "cs47l91", CS47L91 },
• { "wm1840", WM1840 },
• { },

+}; +MODULE_DEVICE_TABLE(spi, madera_spi_ids);

+static struct spi_driver madera_spi_driver = {

• .driver = {

• .name	= "madera",
  

• .owner	= THIS_MODULE,
  

• .pm	= &madera_pm_ops,
  

• .of_match_table	= of_match_ptr(madera_of_match),
  

• },
• .probe = madera_spi_probe,
• .remove = madera_spi_remove,
• .id_table = madera_spi_ids,

+};

+module_spi_driver(madera_spi_driver);

+MODULE_DESCRIPTION("Madera SPI bus interface"); +MODULE_AUTHOR("Richard Fitzgerald rf@opensource.wolfsonmicro.com"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/madera.h b/drivers/mfd/madera.h new file mode 100644 index 0000000..6d1b5b8 --- /dev/null +++ b/drivers/mfd/madera.h @@ -0,0 +1,52 @@ +/*

• • MFD internals for Cirrus Logic Madera codecs
• • Copyright 2015-2017 Cirrus Logic
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#ifndef MADERA_MFD_H +#define MADERA_MFD_H

+#include <linux/of.h> +#include <linux/pm.h>

+struct madera;

+extern const struct dev_pm_ops madera_pm_ops; +extern const struct of_device_id madera_of_match[];

+int madera_dev_init(struct madera *madera); +int madera_dev_exit(struct madera *madera);

+#ifdef CONFIG_OF +unsigned long madera_get_type_from_of(struct device *dev); +#else +static inline unsigned long madera_get_type_from_of(struct device *dev) +{

• return 0;

+} +#endif

+extern const struct regmap_config cs47l35_16bit_spi_regmap; +extern const struct regmap_config cs47l35_32bit_spi_regmap; +extern const struct regmap_config cs47l35_16bit_i2c_regmap; +extern const struct regmap_config cs47l35_32bit_i2c_regmap; +int cs47l35_patch(struct madera *madera);

+extern const struct regmap_config cs47l85_16bit_spi_regmap; +extern const struct regmap_config cs47l85_32bit_spi_regmap; +extern const struct regmap_config cs47l85_16bit_i2c_regmap; +extern const struct regmap_config cs47l85_32bit_i2c_regmap; +int cs47l85_patch(struct madera *madera);

+extern const struct regmap_config cs47l90_16bit_spi_regmap; +extern const struct regmap_config cs47l90_32bit_spi_regmap; +extern const struct regmap_config cs47l90_16bit_i2c_regmap; +extern const struct regmap_config cs47l90_32bit_i2c_regmap; +int cs47l90_patch(struct madera *madera);

+#endif diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h new file mode 100644 index 0000000..6609e3c --- /dev/null +++ b/include/linux/mfd/madera/core.h @@ -0,0 +1,180 @@ +/*

• • MFD internals for Cirrus Logic Madera codecs
• • Copyright 2015-2017 Cirrus Logic
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#ifndef MADERA_CORE_H +#define MADERA_CORE_H

+#include <linux/interrupt.h> +#include <linux/notifier.h> +#include <linux/regmap.h> +#include <linux/gpio/consumer.h> +#include <linux/irqchip/irq-madera.h> +#include <linux/mfd/madera/pdata.h> +#include <linux/regulator/consumer.h> +#include <sound/madera-pdata.h>

+enum madera_type {

• CS47L35 = 1,
• CS47L85 = 2,
• CS47L90 = 3,
• CS47L91 = 4,
• WM1840 = 7,

+};

+#define MADERA_MAX_CORE_SUPPLIES 2 +#define MADERA_MAX_GPIOS 40

+#define CS47L35_NUM_GPIOS 16 +#define CS47L85_NUM_GPIOS 40 +#define CS47L90_NUM_GPIOS 38

+/* Notifier events */ +#define MADERA_NOTIFY_VOICE_TRIGGER 0x1 +#define MADERA_NOTIFY_HPDET 0x2 +#define MADERA_NOTIFY_MICDET 0x4

+/* GPIO Function Definitions */ +#define MADERA_GP_FN_ALTERNATE 0x00 +#define MADERA_GP_FN_GPIO 0x01 +#define MADERA_GP_FN_DSP_GPIO 0x02 +#define MADERA_GP_FN_IRQ1 0x03 +#define MADERA_GP_FN_IRQ2 0x04 +#define MADERA_GP_FN_FLL1_CLOCK 0x10 +#define MADERA_GP_FN_FLL2_CLOCK 0x11 +#define MADERA_GP_FN_FLL3_CLOCK 0x12 +#define MADERA_GP_FN_FLLAO_CLOCK 0x13 +#define MADERA_GP_FN_FLL1_LOCK 0x18 +#define MADERA_GP_FN_FLL2_LOCK 0x19 +#define MADERA_GP_FN_FLL3_LOCK 0x1A +#define MADERA_GP_FN_FLLAO_LOCK 0x1B +#define MADERA_GP_FN_OPCLK_OUT 0x40 +#define MADERA_GP_FN_OPCLK_ASYNC_OUT 0x41 +#define MADERA_GP_FN_PWM1 0x48 +#define MADERA_GP_FN_PWM2 0x49 +#define MADERA_GP_FN_SPDIF_OUT 0x4C +#define MADERA_GP_FN_HEADPHONE_DET 0x50 +#define MADERA_GP_FN_MIC_DET 0x58 +#define MADERA_GP_FN_DRC1_SIGNAL_DETECT 0x80 +#define MADERA_GP_FN_DRC2_SIGNAL_DETECT 0x81 +#define MADERA_GP_FN_ASRC1_IN1_LOCK 0x88 +#define MADERA_GP_FN_ASRC1_IN2_LOCK 0x89 +#define MADERA_GP_FN_ASRC2_IN1_LOCK 0x8A +#define MADERA_GP_FN_ASRC2_IN2_LOCK 0x8B +#define MADERA_GP_FN_DSP_IRQ1 0xA0 +#define MADERA_GP_FN_DSP_IRQ2 0xA1 +#define MADERA_GP_FN_DSP_IRQ3 0xA2 +#define MADERA_GP_FN_DSP_IRQ4 0xA3 +#define MADERA_GP_FN_DSP_IRQ5 0xA4 +#define MADERA_GP_FN_DSP_IRQ6 0xA5 +#define MADERA_GP_FN_DSP_IRQ7 0xA6 +#define MADERA_GP_FN_DSP_IRQ8 0xA7 +#define MADERA_GP_FN_DSP_IRQ9 0xA8 +#define MADERA_GP_FN_DSP_IRQ10 0xA9 +#define MADERA_GP_FN_DSP_IRQ11 0xAA +#define MADERA_GP_FN_DSP_IRQ12 0xAB +#define MADERA_GP_FN_DSP_IRQ13 0xAC +#define MADERA_GP_FN_DSP_IRQ14 0xAD +#define MADERA_GP_FN_DSP_IRQ15 0xAE +#define MADERA_GP_FN_DSP_IRQ16 0xAF +#define MADERA_GP_FN_HPOUT1L_SC 0xB0 +#define MADERA_GP_FN_HPOUT1R_SC 0xB1 +#define MADERA_GP_FN_HPOUT2L_SC 0xB2 +#define MADERA_GP_FN_HPOUT2R_SC 0xB3 +#define MADERA_GP_FN_HPOUT3L_SC 0xB4 +#define MADERA_GP_FN_HPOUT4R_SC 0xB5 +#define MADERA_GP_FN_SPKOUTL_SC 0xB6 +#define MADERA_GP_FN_SPKOUTR_SC 0xB7 +#define MADERA_GP_FN_HPOUT1L_ENA 0xC0 +#define MADERA_GP_FN_HPOUT1R_ENA 0xC1 +#define MADERA_GP_FN_HPOUT2L_ENA 0xC2 +#define MADERA_GP_FN_HPOUT2R_ENA 0xC3 +#define MADERA_GP_FN_HPOUT3L_ENA 0xC4 +#define MADERA_GP_FN_HPOUT4R_ENA 0xC5 +#define MADERA_GP_FN_SPKOUTL_ENA 0xC6 +#define MADERA_GP_FN_SPKOUTR_ENA 0xC7 +#define MADERA_GP_FN_HPOUT1L_DIS 0xD0 +#define MADERA_GP_FN_HPOUT1R_DIS 0xD1 +#define MADERA_GP_FN_HPOUT2L_DIS 0xD2 +#define MADERA_GP_FN_HPOUT2R_DIS 0xD3 +#define MADERA_GP_FN_HPOUT3L_DIS 0xD4 +#define MADERA_GP_FN_HPOUT4R_DIS 0xD5 +#define MADERA_GP_FN_SPKOUTL_DIS 0xD6 +#define MADERA_GP_FN_SPKOUTR_DIS 0xD7 +#define MADERA_GP_FN_SPK_SHUTDOWN 0xE0 +#define MADERA_GP_FN_SPK_OVH_SHUTDOWN 0xE1 +#define MADERA_GP_FN_SPK_OVH_WARN 0xE2 +#define MADERA_GP_FN_TIMER1_STATUS 0x140 +#define MADERA_GP_FN_TIMER2_STATUS 0x141 +#define MADERA_GP_FN_TIMER3_STATUS 0x142 +#define MADERA_GP_FN_TIMER4_STATUS 0x143 +#define MADERA_GP_FN_TIMER5_STATUS 0x144 +#define MADERA_GP_FN_TIMER6_STATUS 0x145 +#define MADERA_GP_FN_TIMER7_STATUS 0x146 +#define MADERA_GP_FN_TIMER8_STATUS 0x147 +#define MADERA_GP_FN_EVENTLOG1_FIFO_STS 0x150 +#define MADERA_GP_FN_EVENTLOG2_FIFO_STS 0x151 +#define MADERA_GP_FN_EVENTLOG3_FIFO_STS 0x152 +#define MADERA_GP_FN_EVENTLOG4_FIFO_STS 0x153 +#define MADERA_GP_FN_EVENTLOG5_FIFO_STS 0x154 +#define MADERA_GP_FN_EVENTLOG6_FIFO_STS 0x155 +#define MADERA_GP_FN_EVENTLOG7_FIFO_STS 0x156 +#define MADERA_GP_FN_EVENTLOG8_FIFO_STS 0x157

+struct snd_soc_dapm_context;

+/*

• • struct madera
• • This should not be used by anything except child drivers of the Madera MFD
• */

+struct madera {

• struct regmap *regmap;
• struct regmap *regmap_32bit;
• struct device *dev;
• enum madera_type type;
• unsigned int rev;
• struct gpio_desc *reset_gpio;
• int num_core_supplies;
• struct regulator_bulk_data core_supplies[MADERA_MAX_CORE_SUPPLIES];
• struct regulator *dcvdd;
• bool internal_dcvdd;
• struct madera_pdata pdata;
• struct device *irq_dev;
• int irq;
• unsigned int out_clamp[MADERA_MAX_OUTPUT];
• unsigned int out_shorted[MADERA_MAX_OUTPUT];
• unsigned int hp_ena;
• struct snd_soc_dapm_context *dapm;
• struct blocking_notifier_head notifier;

+};

+unsigned int madera_get_num_micbias(struct madera *madera); +unsigned int madera_get_num_childbias(struct madera *madera,

• 		      unsigned int micbias);
  

+const char *madera_name_from_type(enum madera_type type);

+static inline int madera_call_notifiers(struct madera *madera,

• 			unsigned long event,
  

• 			void *data)
  

+{

• return blocking_notifier_call_chain(&madera->notifier, event, data);

+} +#endif diff --git a/include/linux/mfd/madera/pdata.h b/include/linux/mfd/madera/pdata.h new file mode 100644 index 0000000..b3af47c --- /dev/null +++ b/include/linux/mfd/madera/pdata.h @@ -0,0 +1,61 @@ +/*

• • Platform data for Cirrus Logic Madera codecs
• • Copyright 2015-2017 Cirrus Logic
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License version 2 as
• • published by the Free Software Foundation.
• */

+#ifndef MADERA_PDATA_H +#define MADERA_PDATA_H

+#include <linux/kernel.h> +#include <linux/irqchip/irq-madera-pdata.h> +#include <linux/regulator/arizona-ldo1.h> +#include <linux/regulator/arizona-micsupp.h> +#include <linux/regulator/machine.h> +#include <sound/madera-pdata.h>

+#define MADERA_MAX_MICBIAS 4 +#define MADERA_MAX_CHILD_MICBIAS 4

+#define MADERA_MAX_GPSW 2

+struct pinctrl_map;

+/**

• • struct madera_pdata - Configuration data for Madera devices
• • @reset: GPIO controlling /RESET (0 = none)
• • @ldo1: Substruct of pdata for the LDO1 regulator
• • @micvdd: Substruct of pdata for the MICVDD regulator
• • @irqchip: Substruct of pdata for the irqchip driver
• • @gpio_base: Base GPIO number
• • @gpio_configs: Array of GPIO configurations (See Documentation/pinctrl.txt)
• • @n_gpio_configs: Number of entries in gpio_configs
• • @codec: Substructure of pdata for the ASoC codec driver

• •     See include/sound/madera-pdata.h
    

• • @gpsw: General purpose switch mode setting (See the SW1_MODE field

• •     in the datasheet for the available values for your codec)
    

• */

+struct madera_pdata {

• int reset;
• struct arizona_ldo1_pdata ldo1;
• struct arizona_micsupp_pdata micvdd;
• struct madera_irqchip_pdata irqchip;
• int gpio_base;
• const struct pinctrl_map *gpio_configs;
• int n_gpio_configs;
• struct madera_codec_pdata codec;
• u32 gpsw[MADERA_MAX_GPSW];

+};

+#endif