On Sun, Aug 11, 2019 at 10:45:17PM +0300, Daniel Baluta wrote:
From: Viorel Suman viorel.suman@nxp.com
The SAI interface can be a clock supplier or consumer as a function of stream direction. e.g SAI can be master for Tx and slave for Rx.
Signed-off-by: Viorel Suman viorel.suman@nxp.com Signed-off-by: Daniel Baluta daniel.baluta@nxp.com
sound/soc/fsl/fsl_sai.c | 18 +++++++++--------- sound/soc/fsl/fsl_sai.h | 2 +- 2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 4a346fcb5630..69cf3678c859 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -273,18 +273,18 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai *cpu_dai,
This function is called for both TX and RX at the same time from fsl_sai_set_dai_fmt() so I don't actually see how it can operate in two opposite directions from this change alone. Anything that I have missed?
Thanks Nicolin
case SND_SOC_DAIFMT_CBS_CFS: val_cr2 |= FSL_SAI_CR2_BCD_MSTR; val_cr4 |= FSL_SAI_CR4_FSD_MSTR;
sai->is_slave_mode = false;
break; case SND_SOC_DAIFMT_CBM_CFM:sai->is_slave_mode[tx] = false;
sai->is_slave_mode = true;
break; case SND_SOC_DAIFMT_CBS_CFM: val_cr2 |= FSL_SAI_CR2_BCD_MSTR;sai->is_slave_mode[tx] = true;
sai->is_slave_mode = false;
break; case SND_SOC_DAIFMT_CBM_CFS: val_cr4 |= FSL_SAI_CR4_FSD_MSTR;sai->is_slave_mode[tx] = false;
sai->is_slave_mode = true;
break; default: return -EINVAL;sai->is_slave_mode[tx] = true;
@@ -326,7 +326,7 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq) int ret = 0;
/* Don't apply to slave mode */
- if (sai->is_slave_mode)
if (sai->is_slave_mode[tx]) return 0;
for (id = 0; id < FSL_SAI_MCLK_MAX; id++) {
@@ -422,7 +422,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, if (sai->slot_width) slot_width = sai->slot_width;
- if (!sai->is_slave_mode) {
- if (!sai->is_slave_mode[tx]) { ret = fsl_sai_set_bclk(cpu_dai, tx, slots * slot_width * params_rate(params)); if (ret)
@@ -458,7 +458,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, * error. */
- if (!sai->is_slave_mode) {
- if (!sai->is_slave_mode[tx]) { if (!sai->synchronous[TX] && sai->synchronous[RX] && !tx) { regmap_update_bits(sai->regmap, FSL_SAI_TCR4(ofs), FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
@@ -497,7 +497,7 @@ static int fsl_sai_hw_free(struct snd_pcm_substream *substream, struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
- if (!sai->is_slave_mode &&
- if (!sai->is_slave_mode[tx] && sai->mclk_streams & BIT(substream->stream)) { clk_disable_unprepare(sai->mclk_clk[sai->mclk_id[tx]]); sai->mclk_streams &= ~BIT(substream->stream);
@@ -581,7 +581,7 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, * This is a hardware bug, and will be fix in the * next sai version. */
if (!sai->is_slave_mode) {
if (!sai->is_slave_mode[tx]) { /* Software Reset for both Tx and Rx */ regmap_write(sai->regmap, FSL_SAI_TCSR(ofs), FSL_SAI_CSR_SR);
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index b89b0ca26053..c2c43a7d9ba1 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -167,7 +167,7 @@ struct fsl_sai { struct clk *bus_clk; struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
- bool is_slave_mode;
- bool is_slave_mode[2]; bool is_lsb_first; bool is_dsp_mode; bool synchronous[2];
-- 2.17.1