From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
ALSA SoC needs to know connected DAI ID for probing. It is not a big problem if device/driver was only for sound, but getting DAI ID will be difficult if device includes both Video/Sound, like HDMI. To solve this issue, this patch adds new .get_dai_id callback on hdmi_codec_ops. dw-hdmi-i2s will assume that HDMI sound will be connected to reg = <2>. Then, ALSA SoC side will recognized it as DAI 0
ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; /* HDMI Video IN */ }; port@1 { reg = <1>; /* HDMI OUT */ }; port@2 { reg = <2>; /* HDMI Sound IN */ }; };
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com --- .../bindings/display/bridge/renesas,dw-hdmi.txt | 9 ++++++++- drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 21 +++++++++++++++++++++ 2 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index f6b3f36..81b6858 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -25,7 +25,8 @@ Required properties: - clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. - ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0 corresponding to the video input of the controller and one port numbered 1 - corresponding to its HDMI output. Each port shall have a single endpoint. + corresponding to its HDMI output, and one port numbered 2 corresponding to + sound input of the controller. Each port shall have a single endpoint.
Optional properties:
@@ -59,6 +60,12 @@ Example: remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + rcar_dw_hdmi0_sound_in: endpoint { + remote-endpoint = <&hdmi_sound_out>; + }; + }; }; };
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c index aaf287d..b2cf59f 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c @@ -82,9 +82,30 @@ static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data) hdmi_write(audio, HDMI_AUD_CONF0_SW_RESET, HDMI_AUD_CONF0); }
+static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component, + struct device_node *endpoint) +{ + struct of_endpoint of_ep; + int ret; + + ret = of_graph_parse_endpoint(endpoint, &of_ep); + if (ret < 0) + return ret; + + /* + * HDMI sound should be located as reg = <2> + * Then, it is sound port 0 + */ + if (of_ep.port == 2) + return 0; + + return -EINVAL; +} + static struct hdmi_codec_ops dw_hdmi_i2s_ops = { .hw_params = dw_hdmi_i2s_hw_params, .audio_shutdown = dw_hdmi_i2s_audio_shutdown, + .get_dai_id = dw_hdmi_i2s_get_dai_id, };
static int snd_dw_hdmi_probe(struct platform_device *pdev)