Em Mon, 27 Dec 2021 17:42:46 +0100 Niklas Schnelle schnelle@linux.ibm.com escreveu:
Introduce a new LEGACY_PCI Kconfig option which gates support for legacy PCI devices including those attached to a PCI-to-PCI Express bridge and PCI Express devices using legacy I/O spaces. Note that this is different from non PCI uses of I/O ports such as by ACPI.
Add dependencies on LEGACY_PCI for all PCI drivers which only target legacy PCI devices and ifdef legacy PCI specific functions in ata handling.
Co-developed-by: Arnd Bergmann arnd@kernel.org Signed-off-by: Arnd Bergmann arnd@kernel.org Signed-off-by: Niklas Schnelle schnelle@linux.ibm.com
drivers/ata/Kconfig | 34 ++++++++-------- drivers/ata/ata_generic.c | 3 +- drivers/ata/libata-sff.c | 2 + drivers/comedi/Kconfig | 42 +++++++++++++++++++ drivers/gpio/Kconfig | 2 +- drivers/hwmon/Kconfig | 6 +-- drivers/i2c/busses/Kconfig | 24 +++++------ drivers/input/gameport/Kconfig | 4 +- drivers/isdn/hardware/mISDN/Kconfig | 14 +++----
drivers/media/cec/platform/Kconfig | 2 +- drivers/media/pci/dm1105/Kconfig | 2 +- drivers/media/radio/Kconfig | 2 +-
Not sure what you meant by "legacy I/O spaces" on this patch. I mean, I would expect non-PCIe devices - like bttv and other devices developed at the past millennium or so to be "legacy", but at least on media, it is touching some drivers that aren't that old, while keeping the really old ones untouched. Instead, it is touching a driver developed in 2017 plus two other ones that are a way newer than other drivers.
The support for the Bt8xx chipset, in particular, is really weird, as a sound driver for such chipset:
@@ -172,6 +177,7 @@ config SND_AZT3328
config SND_BT87X tristate "Bt87x Audio Capture"
- depends on LEGACY_PCI select SND_PCM help If you want to record audio from TV cards based on
was marked as dependent of LEGACY_PCI, while the DVB and V4L2 ones weren't.
Sounds confusing to me, as the PCI bridge used by a Bt87x device should be the same for all three subdevices.
I'm confused...
Regards, Mauro