Improve API for USB Powe delivery and power management.
Acked-by: Enric Balletbo i Serra enric.balletbo@collabora.com Signed-off-by: Gwendal Grignou gwendal@chromium.org --- include/linux/mfd/cros_ec_commands.h | 236 ++++++++++++++++++++++++++- 1 file changed, 228 insertions(+), 8 deletions(-)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 94689698330f..4784f3634793 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -2796,7 +2796,8 @@ struct ec_params_config_power_button {
struct ec_params_usb_charge_set_mode { uint8_t usb_port_id; - uint8_t mode; + uint8_t mode:7; + uint8_t inhibit_charge:1; } __ec_align1;
/*****************************************************************************/ @@ -3933,6 +3934,11 @@ enum charge_state_params { CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ CS_PARAM_CHG_STATUS, /* charger-specific status */ CS_PARAM_CHG_OPTION, /* charger-specific options */ + CS_PARAM_LIMIT_POWER, /* + * Check if power is limited due to + * low battery and / or a weak external + * charger. READ ONLY. + */ /* How many so far? */ CS_NUM_BASE_PARAMS,
@@ -3940,6 +3946,17 @@ enum charge_state_params { CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff,
+ /* Range for CONFIG_CHARGE_STATE_DEBUG params */ + CS_PARAM_DEBUG_MIN = 0x20000, + CS_PARAM_DEBUG_CTL_MODE = 0x20000, + CS_PARAM_DEBUG_MANUAL_MODE, + CS_PARAM_DEBUG_SEEMS_DEAD, + CS_PARAM_DEBUG_SEEMS_DISCONNECTED, + CS_PARAM_DEBUG_BATT_REMOVED, + CS_PARAM_DEBUG_MANUAL_CURRENT, + CS_PARAM_DEBUG_MANUAL_VOLTAGE, + CS_PARAM_DEBUG_MAX = 0x2ffff, + /* Other custom param ranges go here... */ };
@@ -4000,6 +4017,16 @@ struct ec_params_external_power_limit_v1 {
#define EC_POWER_LIMIT_NONE 0xffff
+/* + * Set maximum voltage & current of a dedicated charge port + */ +#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3 + +struct ec_params_dedicated_charger_limit { + uint16_t current_lim; /* in mA */ + uint16_t voltage_lim; /* in mV */ +} __ec_align2; + /* Inform the EC when entering a sleep state */ #define EC_CMD_HOST_SLEEP_EVENT 0x00A9
@@ -4328,18 +4355,53 @@ struct ec_params_reboot_ec {
/* EC to PD MCU exchange status command */ #define EC_CMD_PD_EXCHANGE_STATUS 0x0100 +#define EC_VER_PD_EXCHANGE_STATUS 2 + +enum pd_charge_state { + PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */ + PD_CHARGE_NONE, /* No charging allowed */ + PD_CHARGE_5V, /* 5V charging only */ + PD_CHARGE_MAX /* Charge at max voltage */ +};
/* Status of EC being sent to PD */ +#define EC_STATUS_HIBERNATING BIT(0) + struct ec_params_pd_status { - int8_t batt_soc; /* battery state of charge */ + uint8_t status; /* EC status */ + int8_t batt_soc; /* battery state of charge */ + uint8_t charge_state; /* charging state (from enum pd_charge_state) */ } __ec_align1;
/* Status of PD being sent back to EC */ +#define PD_STATUS_HOST_EVENT BIT(0) /* Forward host event to AP */ +#define PD_STATUS_IN_RW BIT(1) /* Running RW image */ +#define PD_STATUS_JUMPED_TO_IMAGE BIT(2) /* Current image was jumped to */ +#define PD_STATUS_TCPC_ALERT_0 BIT(3) /* Alert active in port 0 TCPC */ +#define PD_STATUS_TCPC_ALERT_1 BIT(4) /* Alert active in port 1 TCPC */ +#define PD_STATUS_TCPC_ALERT_2 BIT(5) /* Alert active in port 2 TCPC */ +#define PD_STATUS_TCPC_ALERT_3 BIT(6) /* Alert active in port 3 TCPC */ +#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \ + PD_STATUS_TCPC_ALERT_1 | \ + PD_STATUS_HOST_EVENT) struct ec_response_pd_status { - int8_t status; /* PD MCU status */ - uint32_t curr_lim_ma; /* input current limit */ + uint32_t curr_lim_ma; /* input current limit */ + uint16_t status; /* PD MCU status */ + int8_t active_charge_port; /* active charging port */ } __ec_align_size1;
+/* AP to PD MCU host event status command, cleared on read */ +#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104 + +/* PD MCU host event status bits */ +#define PD_EVENT_UPDATE_DEVICE BIT(0) +#define PD_EVENT_POWER_CHANGE BIT(1) +#define PD_EVENT_IDENTITY_RECEIVED BIT(2) +#define PD_EVENT_DATA_SWAP BIT(3) +struct ec_response_host_event_status { + uint32_t status; /* PD MCU host event status */ +} __ec_align4; + /* Set USB type-C port role and muxes */ #define EC_CMD_USB_PD_CONTROL 0x0101
@@ -4349,6 +4411,8 @@ enum usb_pd_control_role { USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, USB_PD_CTRL_ROLE_FORCE_SINK = 3, USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, + USB_PD_CTRL_ROLE_FREEZE = 5, + USB_PD_CTRL_ROLE_COUNT };
enum usb_pd_control_mux { @@ -4358,6 +4422,7 @@ enum usb_pd_control_mux { USB_PD_CTRL_MUX_DP = 3, USB_PD_CTRL_MUX_DOCK = 4, USB_PD_CTRL_MUX_AUTO = 5, + USB_PD_CTRL_MUX_COUNT };
enum usb_pd_control_swap { @@ -4387,6 +4452,13 @@ struct ec_params_usb_pd_control { #define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */ #define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */
+struct ec_response_usb_pd_control { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + uint8_t state; +} __ec_align1; + struct ec_response_usb_pd_control_v1 { uint8_t enabled; uint8_t role; @@ -4394,6 +4466,25 @@ struct ec_response_usb_pd_control_v1 { char state[32]; } __ec_align1;
+/* Values representing usbc PD CC state */ +#define USBC_PD_CC_NONE 0 /* No accessory connected */ +#define USBC_PD_CC_NO_UFP 1 /* No UFP accessory connected */ +#define USBC_PD_CC_AUDIO_ACC 2 /* Audio accessory connected */ +#define USBC_PD_CC_DEBUG_ACC 3 /* Debug accessory connected */ +#define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */ +#define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */ + +struct ec_response_usb_pd_control_v2 { + uint8_t enabled; + uint8_t role; + uint8_t polarity; + char state[32]; + uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */ + uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ + /* CL:1500994 Current cable type */ + uint8_t reserved_cable_type; +} __ec_align1; + #define EC_CMD_USB_PD_PORTS 0x0102
/* Maximum number of PD ports on a device, num_ports will be <= this */ @@ -4421,6 +4512,7 @@ enum usb_chg_type { USB_CHG_TYPE_OTHER, USB_CHG_TYPE_VBUS, USB_CHG_TYPE_UNKNOWN, + USB_CHG_TYPE_DEDICATED, }; enum usb_power_roles { USB_PD_PORT_POWER_DISCONNECTED, @@ -4445,9 +4537,6 @@ struct ec_response_usb_pd_power_info { uint32_t max_power; } __ec_align4;
-struct ec_params_usb_pd_info_request { - uint8_t port; -} __ec_align1;
/* * This command will return the number of USB PD charge port + the number @@ -4459,6 +4548,46 @@ struct ec_response_charge_port_count { uint8_t port_count; } __ec_align1;
+/* Write USB-PD device FW */ +#define EC_CMD_USB_PD_FW_UPDATE 0x0110 + +enum usb_pd_fw_update_cmds { + USB_PD_FW_REBOOT, + USB_PD_FW_FLASH_ERASE, + USB_PD_FW_FLASH_WRITE, + USB_PD_FW_ERASE_SIG, +}; + +struct ec_params_usb_pd_fw_update { + uint16_t dev_id; + uint8_t cmd; + uint8_t port; + uint32_t size; /* Size to write in bytes */ + /* Followed by data to write */ +} __ec_align4; + +/* Write USB-PD Accessory RW_HASH table entry */ +#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111 +/* RW hash is first 20 bytes of SHA-256 of RW section */ +#define PD_RW_HASH_SIZE 20 +struct ec_params_usb_pd_rw_hash_entry { + uint16_t dev_id; + uint8_t dev_rw_hash[PD_RW_HASH_SIZE]; + uint8_t reserved; /* + * For alignment of current_image + * TODO(rspangler) but it's not aligned! + * Should have been reserved[2]. + */ + uint32_t current_image; /* One of ec_current_image */ +} __ec_align1; + +/* Read USB-PD Accessory info */ +#define EC_CMD_USB_PD_DEV_INFO 0x0112 + +struct ec_params_usb_pd_info_request { + uint8_t port; +} __ec_align1; + /* Read USB-PD Device discovery info */ #define EC_CMD_USB_PD_DISCOVERY 0x0113 struct ec_params_usb_pd_discovery_entry { @@ -4481,7 +4610,11 @@ struct ec_params_charge_port_override { int16_t override_port; /* Override port# */ } __ec_align2;
-/* Read (and delete) one entry of PD event log */ +/* + * Read (and delete) one entry of PD event log. + * TODO(crbug.com/751742): Make this host command more generic to accommodate + * future non-PD logs that use the same internal EC event_log. + */ #define EC_CMD_PD_GET_LOG_ENTRY 0x0115
struct ec_response_pd_log { @@ -4569,6 +4702,60 @@ struct mcdp_info { #define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1]) #define MCDP_FAMILY(family) ((family[0] << 8) | family[1])
+/* Get/Set USB-PD Alternate mode info */ +#define EC_CMD_USB_PD_GET_AMODE 0x0116 +struct ec_params_usb_pd_get_mode_request { + uint16_t svid_idx; /* SVID index to get */ + uint8_t port; /* port */ +} __ec_align_size1; + +struct ec_params_usb_pd_get_mode_response { + uint16_t svid; /* SVID */ + uint16_t opos; /* Object Position */ + uint32_t vdo[6]; /* Mode VDOs */ +} __ec_align4; + +#define EC_CMD_USB_PD_SET_AMODE 0x0117 + +enum pd_mode_cmd { + PD_EXIT_MODE = 0, + PD_ENTER_MODE = 1, + /* Not a command. Do NOT remove. */ + PD_MODE_CMD_COUNT, +}; + +struct ec_params_usb_pd_set_mode_request { + uint32_t cmd; /* enum pd_mode_cmd */ + uint16_t svid; /* SVID to set */ + uint8_t opos; /* Object Position */ + uint8_t port; /* port */ +} __ec_align4; + +/* Ask the PD MCU to record a log of a requested type */ +#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118 + +struct ec_params_pd_write_log_entry { + uint8_t type; /* event type : see PD_EVENT_xx above */ + uint8_t port; /* port#, or 0 for events unrelated to a given port */ +} __ec_align1; + + +/* Control USB-PD chip */ +#define EC_CMD_PD_CONTROL 0x0119 + +enum ec_pd_control_cmd { + PD_SUSPEND = 0, /* Suspend the PD chip (EC: stop talking to PD) */ + PD_RESUME, /* Resume the PD chip (EC: start talking to PD) */ + PD_RESET, /* Force reset the PD chip */ + PD_CONTROL_DISABLE, /* Disable further calls to this command */ + PD_CHIP_ON, /* Power on the PD chip */ +}; + +struct ec_params_pd_control { + uint8_t chip; /* chip id */ + uint8_t subcmd; +} __ec_align1; + /* Get info about USB-C SS muxes */ #define EC_CMD_USB_PD_MUX_INFO 0x011A
@@ -4581,10 +4768,43 @@ struct ec_params_usb_pd_mux_info { #define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ #define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ #define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ +#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */
struct ec_response_usb_pd_mux_info { uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ } __ec_align1; + +#define EC_CMD_PD_CHIP_INFO 0x011B + +struct ec_params_pd_chip_info { + uint8_t port; /* USB-C port number */ + uint8_t renew; /* Force renewal */ +} __ec_align1; + +struct ec_response_pd_chip_info { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; +} __ec_align2; + +struct ec_response_pd_chip_info_v1 { + uint16_t vendor_id; + uint16_t product_id; + uint16_t device_id; + union { + uint8_t fw_version_string[8]; + uint64_t fw_version_number; + }; + union { + uint8_t min_req_fw_version_string[8]; + uint64_t min_req_fw_version_number; + }; +} __ec_align2; + /*****************************************************************************/ /* * Reserve a range of host commands for board-specific, experimental, or