Hi,
On Mon, Dec 01, 2014 at 11:50:51AM +0900, Jiada Wang wrote:
irq_dispose_mapping() in turns calls unregister_irq_proc(), which will remove irq proc entry, if IRQ is not freed before calling of irq_dispose_mapping(), then it will cause kernel warning.
By free IRQ before irq_dispose_mapping(), this patch fix the following kernel warning found when remove of fsl_ssi driver:
[ 31.515336] ------------[ cut here ]------------ [ 31.520091] WARNING: CPU: 2 PID: 434 at fs/proc/generic.c:521 remove_proc_entry+0x14c/0x16c() [ 31.528708] remove_proc_entry: removing non-empty directory 'irq/79', leaking at least '202c000.ss' [ 31.537911] Modules linked in: snd_soc_wm8962 snd_soc_imx_wm8962 snd_soc_fsl_ssi(-) evbug [ 31.546249] CPU: 2 PID: 434 Comm: rmmod Not tainted 3.18.0-rc6-00028-g3314bf6-dirty #1 [ 31.554235] Backtrace: [ 31.556816] [<80011ea8>] (dump_backtrace) from [<80012044>] (show_stack+0x18/0x1c) [ 31.564416] r6:80142c88 r5:00000000 r4:00000000 r3:00000000 [ 31.570267] [<8001202c>] (show_stack) from [<806980ec>] (dump_stack+0x88/0xa4) [ 31.577588] [<80698064>] (dump_stack) from [<80029d78>] (warn_slowpath_common+0x70/0x94) [ 31.585711] r5:00000009 r4:bb61fd90 [ 31.589423] [<80029d08>] (warn_slowpath_common) from [<80029e40>] (warn_slowpath_fmt+0x38/0x40) [ 31.598187] r8:bb61fdfe r7:be05d76d r6:be05d9a8 r5:00000002 r4:be05d700 [ 31.605054] [<80029e0c>] (warn_slowpath_fmt) from [<80142c88>] (remove_proc_entry+0x14c/0x16c) [ 31.613709] r3:806a79c0 r2:808229a0 [ 31.617371] [<80142b3c>] (remove_proc_entry) from [<80070380>] (unregister_irq_proc+0x94/0xb8) [ 31.625989] r10:00000000 r8:8000ede4 r7:80955f2c r6:0000004f r5:8118e738 r4:be00af00 [ 31.633952] [<800702ec>] (unregister_irq_proc) from [<80069dac>] (free_desc+0x2c/0x64) [ 31.641898] r6:0000004f r5:80955f38 r4:be00af00 [ 31.646604] [<80069d80>] (free_desc) from [<80069e68>] (irq_free_descs+0x4c/0x8c) [ 31.654092] r7:00000081 r6:00000001 r5:0000004f r4:00000001 [ 31.659863] [<80069e1c>] (irq_free_descs) from [<8006fc3c>] (irq_dispose_mapping+0x40/0x5c) [ 31.668247] r6:be17b844 r5:be17b800 r4:0000004f r3:802c5ec0 [ 31.673998] [<8006fbfc>] (irq_dispose_mapping) from [<7f004ea4>] (fsl_ssi_remove+0x58/0x70 [snd_so) [ 31.683948] r4:bb5bba10 r3:00000001 [ 31.687618] [<7f004e4c>] (fsl_ssi_remove [snd_soc_fsl_ssi]) from [<803720a0>] (platform_drv_remove) [ 31.697564] r5:7f0064f8 r4:be17b810 [ 31.701195] [<80372080>] (platform_drv_remove) from [<80370494>] (__device_release_driver+0x78/0xc) [ 31.710361] r5:7f0064f8 r4:be17b810 [ 31.713987] [<8037041c>] (__device_release_driver) from [<80370d20>] (driver_detach+0xbc/0xc0) [ 31.722631] r5:7f0064f8 r4:be17b810 [ 31.726259] [<80370c64>] (driver_detach) from [<80370304>] (bus_remove_driver+0x54/0x98) [ 31.734382] r6:00000800 r5:00000000 r4:7f0064f8 r3:bb67f500 [ 31.740149] [<803702b0>] (bus_remove_driver) from [<80371398>] (driver_unregister+0x30/0x50) [ 31.748617] r4:7f0064f8 r3:bd9f7080 [ 31.752245] [<80371368>] (driver_unregister) from [<80371f3c>] (platform_driver_unregister+0x14/0x) [ 31.761498] r4:7f00655c r3:7f005a70 [ 31.765130] [<80371f28>] (platform_driver_unregister) from [<7f005a84>] (fsl_ssi_driver_exit+0x14/) [ 31.776147] [<7f005a70>] (fsl_ssi_driver_exit [snd_soc_fsl_ssi]) from [<8008ed80>] (SyS_delete_mod) [ 31.786553] [<8008ec64>] (SyS_delete_module) from [<8000ec20>] (ret_fast_syscall+0x0/0x48) [ 31.794824] r6:00c46d18 r5:00000800 r4:00c46d18 [ 31.799530] ---[ end trace 954e8a3a15379e52 ]---
Moreover replace devm_request_irq() with request_irq() since there is no need to use it as now driver always frees IRQ manually.
devm_request_irq() is used by other drivers too, this should not be a problem. Looking at the code it seems that irq_dispose_mapping may not be necessary with devm_request_irq(). So I think it would be better to remove irq_dispose_mapping() instead.
Best Regards,
Markus Pargmann