Convert binding doc tlv320aic31xx.txt to yaml format. Additional change: - add i2c node in example. - replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have been defined in header file. - add ref to dai-common.yaml. - add #sound-dai-cells.
Fix below warning: arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18: failed to match any schema with compatible: ['ti,tlv320dac3100']
Signed-off-by: Frank Li Frank.Li@nxp.com --- .../bindings/sound/ti,tlv320dac3100.yaml | 127 ++++++++++++++++++ .../bindings/sound/tlv320aic31xx.txt | 77 ----------- 2 files changed, 127 insertions(+), 77 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml new file mode 100644 index 0000000000000..85e937e34962d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320dac3100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments - tlv320aic31xx Codec module + +maintainers: + - Shenghao Ding shenghao-ding@ti.com + +description: | + CODEC output pins: + * HPL + * HPR + * SPL, devices with stereo speaker amp + * SPR, devices with stereo speaker amp + * SPK, devices with mono speaker amp + * MICBIAS + + CODEC input pins: + * MIC1LP, devices with ADC + * MIC1RP, devices with ADC + * MIC1LM, devices with ADC + * AIN1, devices without ADC + * AIN2, devices without ADC + + The pins can be used in referring sound node's audio-routing property. + +properties: + compatible: + enum: + - ti,tlv320aic310x # - Generic TLV320AIC31xx with mono speaker amp + - ti,tlv320aic311x # - Generic TLV320AIC31xx with stereo speaker amp + - ti,tlv320aic3100 # - TLV320AIC3100 (mono speaker amp, no MiniDSP) + - ti,tlv320aic3110 # - TLV320AIC3110 (stereo speaker amp, no MiniDSP) + - ti,tlv320aic3120 # - TLV320AIC3120 (mono speaker amp, MiniDSP) + - ti,tlv320aic3111 # - TLV320AIC3111 (stereo speaker amp, MiniDSP) + - ti,tlv320dac3100 # - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP) + - ti,tlv320dac3101 # - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP) + + reg: + maxItems: 1 + + '#sound-dai-cells': + const: 0 + + HPVDD-supply: true + + SPRVDD-supply: true + + SPLVDD-supply: true + + AVDD-supply: true + + IOVDD-supply: true + + DVDD-supply: true + + reset-gpios: + description: GPIO specification for the active low RESET input. + + ai31xx-micbias-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + enum: [1, 2, 3] + description: | + MicBias Voltage setting + 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V + 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V + 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD + + ai31xx-ocmv: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + output common-mode voltage setting + 0 - 1.35V, + 1 - 1.5V, + 2 - 1.65V, + 3 - 1.8V + + gpio-reset: + description: gpio pin number used for codec reset + deprecated: true + + +required: + - compatible + - reg + - HPVDD-supply + - SPRVDD-supply + - SPLVDD-supply + - AVDD-supply + - IOVDD-supply + - DVDD-supply + +allOf: + - $ref: dai-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/sound/tlv320aic31xx.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sound@18 { + compatible = "ti,tlv320aic311x"; + reg = <0x18>; + + ai31xx-micbias-vg = <MICBIAS_2_0V>; + reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + + HPVDD-supply = <®ulator>; + SPRVDD-supply = <®ulator>; + SPLVDD-supply = <®ulator>; + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt deleted file mode 100644 index bbad98d5b9862..0000000000000 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ /dev/null @@ -1,77 +0,0 @@ -Texas Instruments - tlv320aic31xx Codec module - -The tlv320aic31xx serial control bus communicates through I2C protocols - -Required properties: - -- compatible - "string" - One of: - "ti,tlv320aic310x" - Generic TLV320AIC31xx with mono speaker amp - "ti,tlv320aic311x" - Generic TLV320AIC31xx with stereo speaker amp - "ti,tlv320aic3100" - TLV320AIC3100 (mono speaker amp, no MiniDSP) - "ti,tlv320aic3110" - TLV320AIC3110 (stereo speaker amp, no MiniDSP) - "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP) - "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP) - "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP) - "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP) - -- reg - <int> - I2C slave address -- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply, - DVDD-supply : power supplies for the device as covered in - Documentation/devicetree/bindings/regulator/regulator.txt - - -Optional properties: - -- reset-gpios - GPIO specification for the active low RESET input. -- ai31xx-micbias-vg - MicBias Voltage setting - 1 or MICBIAS_2_0V - MICBIAS output is powered to 2.0V - 2 or MICBIAS_2_5V - MICBIAS output is powered to 2.5V - 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD - If this node is not mentioned or if the value is unknown, then - micbias is set to 2.0V. -- ai31xx-ocmv - output common-mode voltage setting - 0 - 1.35V, - 1 - 1.5V, - 2 - 1.65V, - 3 - 1.8V - -Deprecated properties: - -- gpio-reset - gpio pin number used for codec reset - -CODEC output pins: - * HPL - * HPR - * SPL, devices with stereo speaker amp - * SPR, devices with stereo speaker amp - * SPK, devices with mono speaker amp - * MICBIAS - -CODEC input pins: - * MIC1LP, devices with ADC - * MIC1RP, devices with ADC - * MIC1LM, devices with ADC - * AIN1, devices without ADC - * AIN2, devices without ADC - -The pins can be used in referring sound node's audio-routing property. - -Example: -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/sound/tlv320aic31xx.h> - -tlv320aic31xx: tlv320aic31xx@18 { - compatible = "ti,tlv320aic311x"; - reg = <0x18>; - - ai31xx-micbias-vg = <MICBIAS_OFF>; - - reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - - HPVDD-supply = <®ulator>; - SPRVDD-supply = <®ulator>; - SPLVDD-supply = <®ulator>; - AVDD-supply = <®ulator>; - IOVDD-supply = <®ulator>; - DVDD-supply = <®ulator>; -};