On 17/09/2019 19:12, Ben Dooks wrote:
If the hw_params uses a different bit or channel count, then we need to change both the I2S unit's CIF configuration as well as the APBIF one.
To allow changing the APBIF, add a call to reconfigure the RX or TX FIFO without changing the DMA or allocation, and get the I2S driver to call it once the hw params have been calculate.
Signed-off-by: Ben Dooks ben.dooks@codethink.co.uk
sound/soc/tegra/tegra30_ahub.c | 114 ++++++++++++++++++--------------- sound/soc/tegra/tegra30_ahub.h | 5 ++ sound/soc/tegra/tegra30_i2s.c | 2 + 3 files changed, 69 insertions(+), 52 deletions(-)
diff --git a/sound/soc/tegra/tegra30_ahub.c b/sound/soc/tegra/tegra30_ahub.c index 952381260dc3..58e05ceb86da 100644 --- a/sound/soc/tegra/tegra30_ahub.c +++ b/sound/soc/tegra/tegra30_ahub.c @@ -84,12 +84,40 @@ static int tegra30_ahub_runtime_resume(struct device *dev) return 0; }
+int tegra30_ahub_setup_rx_fifo(enum tegra30_ahub_rxcif rxcif,
struct tegra30_ahub_cif_conf *cif_conf)+{
- int channel = rxcif - TEGRA30_AHUB_RXCIF_APBIF_RX0;
- u32 reg, val;
- pm_runtime_get_sync(ahub->dev);
- reg = TEGRA30_AHUB_CHANNEL_CTRL +
(channel * TEGRA30_AHUB_CHANNEL_CTRL_STRIDE);- val = tegra30_apbif_read(reg);
- val &= ~(TEGRA30_AHUB_CHANNEL_CTRL_RX_THRESHOLD_MASK |
TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_MASK);- val |= (7 << TEGRA30_AHUB_CHANNEL_CTRL_RX_THRESHOLD_SHIFT) |
TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_EN |TEGRA30_AHUB_CHANNEL_CTRL_RX_PACK_16;- tegra30_apbif_write(reg, val);
Aren't you just programming the same value to the APBIF here that was previously programmed by the allocate function? I don't see the point in moving this? What am I missing here?
Cheers Jon