Add the capture memory interface of Amlogic's axg SoCs. TDM, SPDIF or PDM input devices place audio samples inside this FIFO. The FIFO content is then pushed to DDR
Signed-off-by: Jerome Brunet jbrunet@baylibre.com --- sound/soc/meson/Kconfig | 7 ++ sound/soc/meson/Makefile | 2 + sound/soc/meson/axg-toddr.c | 199 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 208 insertions(+) create mode 100644 sound/soc/meson/axg-toddr.c
diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig index cdd78f62e8d7..3916060edcae 100644 --- a/sound/soc/meson/Kconfig +++ b/sound/soc/meson/Kconfig @@ -12,4 +12,11 @@ config SND_MESON_AXG_FRDDR Select Y or M to add support for the frontend playback interfaces embedded in the Amlogic AXG SoC family
+config SND_MESON_AXG_TODDR + tristate "Amlogic AXG Capture FIFO support" + select SND_MESON_AXG_FIFO + help + Select Y or M to add support for the frontend capture interfaces + embedded in the Amlogic AXG SoC family + endmenu diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile index 9c5d7d4a8e33..12edf2db2a24 100644 --- a/sound/soc/meson/Makefile +++ b/sound/soc/meson/Makefile @@ -2,6 +2,8 @@
snd-soc-meson-axg-fifo-objs := axg-fifo.o snd-soc-meson-axg-frddr-objs := axg-frddr.o +snd-soc-meson-axg-toddr-objs := axg-toddr.o
obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o +obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c new file mode 100644 index 000000000000..c2c9bb312586 --- /dev/null +++ b/sound/soc/meson/axg-toddr.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright (c) 2018 BayLibre, SAS. +// Author: Jerome Brunet jbrunet@baylibre.com + +/* This driver implements the frontend capture DAI of AXG based SoCs */ + +#include <linux/clk.h> +#include <linux/regmap.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dai.h> + +#include "axg-fifo.h" + +#define CTRL0_TODDR_SEL_RESAMPLE BIT(30) +#define CTRL0_TODDR_EXT_SIGNED BIT(29) +#define CTRL0_TODDR_PP_MODE BIT(28) +#define CTRL0_TODDR_TYPE_MASK GENMASK(15, 13) +#define CTRL0_TODDR_TYPE(x) ((x) << 13) +#define CTRL0_TODDR_MSB_POS_MASK GENMASK(12, 8) +#define CTRL0_TODDR_MSB_POS(x) ((x) << 8) +#define CTRL0_TODDR_LSB_POS_MASK GENMASK(7, 3) +#define CTRL0_TODDR_LSB_POS(x) ((x) << 3) + +static int axg_toddr_pcm_new(struct snd_soc_pcm_runtime *rtd, + struct snd_soc_dai *dai) +{ + return axg_fifo_pcm_new(rtd, SNDRV_PCM_STREAM_CAPTURE); +} + +static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + unsigned int type, width, msb = 31; + + /* + * NOTE: + * Almost all backend will place the MSB at bit 31, except SPDIF Input + * which will put it at index 28. When adding support for the SPDIF + * Input, we'll need to find which type of backend we are connected to. + */ + + switch (params_physical_width(params)) { + case 8: + type = 0; /* 8 samples of 8 bits */ + break; + case 16: + type = 2; /* 4 samples of 16 bits - right justified */ + break; + case 32: + type = 4; /* 2 samples of 32 bits - right justified */ + break; + default: + return -EINVAL; + } + + width = params_width(params); + + regmap_update_bits(fifo->map, FIFO_CTRL0, + CTRL0_TODDR_TYPE_MASK | + CTRL0_TODDR_MSB_POS_MASK | + CTRL0_TODDR_LSB_POS_MASK, + CTRL0_TODDR_TYPE(type) | + CTRL0_TODDR_MSB_POS(msb) | + CTRL0_TODDR_LSB_POS(msb - (width - 1))); + + return 0; +} + +static int axg_toddr_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + unsigned int fifo_threshold; + int ret; + + /* Enable pclk to access registers and clock the fifo ip */ + ret = clk_prepare_enable(fifo->pclk); + if (ret) + return ret; + + /* Select orginal data - resampling not supported ATM */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_SEL_RESAMPLE, 0); + + /* Only signed format are supported ATM */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_EXT_SIGNED, + CTRL0_TODDR_EXT_SIGNED); + + /* Apply single buffer mode to the interface */ + regmap_update_bits(fifo->map, FIFO_CTRL0, CTRL0_TODDR_PP_MODE, 0); + + /* TODDR does not have a configurable fifo depth */ + fifo_threshold = AXG_FIFO_MIN_CNT - 1; + regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_THRESHOLD_MASK, + CTRL1_THRESHOLD(fifo_threshold)); + + return 0; +} + +static void axg_toddr_dai_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct axg_fifo *fifo = snd_soc_dai_get_drvdata(dai); + + clk_disable_unprepare(fifo->pclk); +} + +static const struct snd_soc_dai_ops axg_toddr_ops = { + .hw_params = axg_toddr_dai_hw_params, + .startup = axg_toddr_dai_startup, + .shutdown = axg_toddr_dai_shutdown, +}; + +static struct snd_soc_dai_driver axg_toddr_dai_drv = { + .name = "TODDR", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = AXG_FIFO_CH_MAX, + .rates = AXG_FIFO_RATES, + .formats = AXG_FIFO_FORMATS, + }, + .ops = &axg_toddr_ops, + .pcm_new = axg_toddr_pcm_new, +}; + +static const char * const axg_toddr_sel_texts[] = { + "IN 0", "IN 1", "IN 2", "IN 3", "IN 4", "IN 6" +}; + +static const unsigned int axg_toddr_sel_values[] = { + 0, 1, 2, 3, 4, 6 +}; + +static SOC_VALUE_ENUM_SINGLE_DECL(axg_toddr_sel_enum, FIFO_CTRL0, + CTRL0_SEL_SHIFT, CTRL0_SEL_MASK, + axg_toddr_sel_texts, axg_toddr_sel_values); + +static const struct snd_kcontrol_new axg_toddr_in_mux = + SOC_DAPM_ENUM("Input Source", axg_toddr_sel_enum); + +static const struct snd_soc_dapm_widget axg_toddr_dapm_widgets[] = { + SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0, &axg_toddr_in_mux), + SND_SOC_DAPM_AIF_IN("IN 0", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 1", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 2", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 3", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 4", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("IN 6", NULL, 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route axg_toddr_dapm_routes[] = { + { "Capture", NULL, "SRC SEL" }, + { "SRC SEL", "IN 0", "IN 0" }, + { "SRC SEL", "IN 1", "IN 1" }, + { "SRC SEL", "IN 2", "IN 2" }, + { "SRC SEL", "IN 3", "IN 3" }, + { "SRC SEL", "IN 4", "IN 4" }, + { "SRC SEL", "IN 6", "IN 6" }, +}; + +static const struct snd_soc_component_driver axg_toddr_component_drv = { + .dapm_widgets = axg_toddr_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(axg_toddr_dapm_widgets), + .dapm_routes = axg_toddr_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(axg_toddr_dapm_routes), + .ops = &axg_fifo_pcm_ops +}; + +static const struct axg_fifo_match_data axg_toddr_match_data = { + .component_drv = &axg_toddr_component_drv, + .dai_drv = &axg_toddr_dai_drv +}; + +static const struct of_device_id axg_toddr_of_match[] = { + { + .compatible = "amlogic,axg-toddr", + .data = &axg_toddr_match_data, + }, {} +}; +MODULE_DEVICE_TABLE(of, axg_toddr_of_match); + +static struct platform_driver axg_toddr_pdrv = { + .probe = axg_fifo_probe, + .driver = { + .name = "axg-toddr", + .of_match_table = axg_toddr_of_match, + }, +}; +module_platform_driver(axg_toddr_pdrv); + +MODULE_DESCRIPTION("Amlogic AXG capture fifo driver"); +MODULE_AUTHOR("Jerome Brunet jbrunet@baylibre.com"); +MODULE_LICENSE("GPL v2");