The MAX9877 needs an address of start register when we write values to registers through i2c_master_send(), but the code for this was missed in max9877_write_regs().
If the value of control is 0 in the max9877_set_out_mode(), the value is not increased to 1, but actually the value to write to the register should be 1. And the register bits for out_mode and osc_mode should be cleared before writing.
Signed-off-by: Joonyoung Shim jy0922.shim@samsung.com --- sound/soc/codecs/max9877.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/max9877.c b/sound/soc/codecs/max9877.c index a1f1119..9e7e964 100644 --- a/sound/soc/codecs/max9877.c +++ b/sound/soc/codecs/max9877.c @@ -25,7 +25,14 @@ static u8 max9877_regs[5] = { 0x40, 0x00, 0x00, 0x00, 0x49 };
static void max9877_write_regs(void) { - if (i2c_master_send(i2c, max9877_regs, 5) != 5) + unsigned int i; + u8 data[6]; + + data[0] = MAX9877_INPUT_MODE; + for (i = 0; i < ARRAY_SIZE(max9877_regs); i++) + data[i + 1] = max9877_regs[i]; + + if (i2c_master_send(i2c, data, 6) != 6) dev_err(&i2c->dev, "i2c write failed\n"); }
@@ -135,12 +142,12 @@ static int max9877_set_out_mode(struct snd_kcontrol *kcontrol, { u8 value = ucontrol->value.integer.value[0];
- if (value) - value += 1; + value += 1;
if ((max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OUTMODE_MASK) == value) return 0;
+ max9877_regs[MAX9877_OUTPUT_MODE] &= ~MAX9877_OUTMODE_MASK; max9877_regs[MAX9877_OUTPUT_MODE] |= value; max9877_write_regs(); return 1; @@ -166,6 +173,7 @@ static int max9877_set_osc_mode(struct snd_kcontrol *kcontrol, if ((max9877_regs[MAX9877_OUTPUT_MODE] & MAX9877_OSC_MASK) == value) return 0;
+ max9877_regs[MAX9877_OUTPUT_MODE] &= ~MAX9877_OSC_MASK; max9877_regs[MAX9877_OUTPUT_MODE] |= value; max9877_write_regs(); return 1;