On 03/19/2016 06:10 AM, Mauro Carvalho Chehab wrote:
Em Fri, 18 Mar 2016 20:50:31 -0600 Shuah Khan shuahkh@osg.samsung.com escreveu:
Fix to release stream resources from media_snd_device_delete() before media device is unregistered. Without this change, stream resource free is attempted after the media device is unregistered which would result in use-after-free errors.
Signed-off-by: Shuah Khan shuahkh@osg.samsung.com
- Ran bind/unbind loop (1000 iteration) test on snd-usb-audio while running mc_nextgen_test loop (1000 iterations) in parallel.
- Ran bind/unbind and rmmod/modprobe tests on both drivers. Also generated graphs when after bind/unbind, rmmod/modprobe. Graphs look good.
- Note: Please apply the following patch to fix memory leak: sound/usb: Fix memory leak in media_snd_stream_delete() during unbind https://lkml.org/lkml/2016/3/16/1050
Yeah, a way better!
For normal bind/unbind, it seems to be working fine. Also for driver's rmmod, so:
Tested-by: Mauro Carvalho Chehab mchehab@osg.samsung.com
PS.:
There are still some troubles if we run an infinite loop binding/unbinding au0828 and another one binding/unbinding snd-usb-audio, like this one:
Yes. I noticed this one when I was running a loop of 1000 on au0828. I couldn't reproduce this when I tested this patch.
P.S: au08282 loops takes longer btw since au0828 initialization is lot more complex. We have to look at this one.
[ 91.556188] ------------[ cut here ]------------ [ 91.556500] WARNING: CPU: 1 PID: 2920 at drivers/media/media-entity.c:392 __media_entity_pipeline_start+0x271/0xce0 [media]() [ 91.556626] Modules linked in: ir_lirc_codec lirc_dev au8522_dig xc5000 tuner au8522_decoder au8522_common au0828 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core tveeprom dvb_core rc_core v4l2_common videodev snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iTCO_wdt kvm iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg snd_hda_codec_realtek i915 snd_hda_codec_generic aesni_intel aes_x86_64 btusb lrw btrtl gf128mul snd_hda_intel glue_helper ablk_helper btbcm btintel cryptd psmouse snd_hda_codec bluetooth [ 91.556693] snd_hwdep i2c_algo_bit sg snd_hda_core serio_raw pcspkr evdev drm_kms_helper snd_pcm rfkill drm snd_timer mei_me snd i2c_i801 soundcore lpc_ich mei mfd_core battery video dw_dmac i2c_designware_platform dw_dmac_core i2c_designware_core acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod sd_mod hid_generic usbhid ahci libahci libata e1000e xhci_pci ptp scsi_mod ehci_pci ehci_hcd pps_core xhci_hcd fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid [ 91.556748] CPU: 1 PID: 2920 Comm: v4l_id Tainted: G D W 4.5.0+ #62 [ 91.556751] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [ 91.556754] ffffffffa0e247a0 ffff8803a3d17b08 ffffffff819447c1 0000000000000000 [ 91.556759] ffff88009bbe17c0 ffff8803a3d17b48 ffffffff8114fd16 ffffffffa0e20651 [ 91.556763] ffff8803a47c9c58 ffff8803a477d2c8 ffff8803a5ac96f8 dffffc0000000000 [ 91.556768] Call Trace: [ 91.556774] [<ffffffff819447c1>] dump_stack+0x85/0xc4 [ 91.556778] [<ffffffff8114fd16>] warn_slowpath_common+0xc6/0x120 [ 91.556783] [<ffffffffa0e20651>] ? __media_entity_pipeline_start+0x271/0xce0 [media] [ 91.556786] [<ffffffff8114feea>] warn_slowpath_null+0x1a/0x20 [ 91.556790] [<ffffffffa0e20651>] __media_entity_pipeline_start+0x271/0xce0 [media] [ 91.556794] [<ffffffff822d9aca>] ? __schedule+0x78a/0x2570 [ 91.556797] [<ffffffff8156e428>] ? memset+0x28/0x30 [ 91.556802] [<ffffffffa0e203e0>] ? media_entity_pipeline_stop+0x60/0x60 [media] [ 91.556806] [<ffffffff8124a73d>] ? trace_hardirqs_on+0xd/0x10 [ 91.556810] [<ffffffffa1430a05>] ? au0828_enable_source+0x55/0x9f0 [au0828] [ 91.556813] [<ffffffff822ddb20>] ? mutex_trylock+0x400/0x400 [ 91.556818] [<ffffffffa1440833>] ? au0828_v4l2_close+0xb3/0x590 [au0828] [ 91.556822] [<ffffffffa1430da4>] au0828_enable_source+0x3f4/0x9f0 [au0828] [ 91.556824] [<ffffffff822ddb20>] ? mutex_trylock+0x400/0x400 [ 91.556834] [<ffffffffa133acf6>] v4l_enable_media_source+0x66/0x90 [videodev] [ 91.556839] [<ffffffffa14409da>] au0828_v4l2_close+0x25a/0x590 [au0828] [ 91.556846] [<ffffffffa1301270>] v4l2_release+0xf0/0x210 [videodev] [ 91.556849] [<ffffffff815c2c4f>] __fput+0x20f/0x6d0 [ 91.556853] [<ffffffff815c317e>] ____fput+0xe/0x10 [ 91.556856] [<ffffffff811acde7>] task_work_run+0x137/0x200 [ 91.556859] [<ffffffff81005d54>] exit_to_usermode_loop+0x154/0x180 [ 91.556863] [<ffffffff8124a1b6>] ? trace_hardirqs_on_caller+0x16/0x590 [ 91.556866] [<ffffffff810073a6>] syscall_return_slowpath+0x186/0x1c0 [ 91.556869] [<ffffffff822e7a1c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 [ 91.556872] ---[ end trace 3e95e11ff0b9efad ]---
I suspect that something is not properly protected by the graph mutex at either ALSA or au0828 driver.
I also got a GPF:
[ 95.398931] au0828: Start Pipeline: Xceive XC5000->au0828a vbi Error -16 [ 95.398936] au0828: Deactivate link Error 0 [ 95.398943] tuner 6-0061: Putting tuner to sleep [ 95.398960] kasan: CONFIG_KASAN_INLINE enabled [ 95.398962] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 95.398967] general protection fault: 0000 [#2] SMP KASAN [ 95.399020] Modules linked in: ir_lirc_codec lirc_dev au8522_dig xc5000 tuner au8522_decoder au8522_common au0828 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core tveeprom dvb_core rc_core v4l2_common videodev snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device media cpufreq_powersave cpufreq_conservative cpufreq_userspace cpufreq_stats parport_pc ppdev lp parport snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iTCO_wdt kvm iTCO_vendor_support irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel sha256_ssse3 sha256_generic hmac drbg snd_hda_codec_realtek i915 snd_hda_codec_generic aesni_intel aes_x86_64 btusb lrw btrtl gf128mul snd_hda_intel glue_helper ablk_helper btbcm btintel cryptd psmouse snd_hda_codec bluetooth [ 95.399853] snd_hwdep i2c_algo_bit sg snd_hda_core serio_raw pcspkr evdev drm_kms_helper snd_pcm rfkill drm snd_timer mei_me snd i2c_i801 soundcore lpc_ich mei mfd_core battery video dw_dmac i2c_designware_platform dw_dmac_core i2c_designware_core acpi_pad button tpm_tis tpm ext4 crc16 mbcache jbd2 dm_mod sd_mod hid_generic usbhid ahci libahci libata e1000e xhci_pci ptp scsi_mod ehci_pci ehci_hcd pps_core xhci_hcd fan thermal sdhci_acpi sdhci mmc_core i2c_hid hid [ 95.400389] CPU: 2 PID: 2966 Comm: v4l_id Tainted: G D W 4.5.0+ #62 [ 95.400455] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [ 95.400541] task: ffff88009bbe4740 ti: ffff8803a45a0000 task.ti: ffff8803a45a0000 [ 95.400610] RIP: 0010:[<ffffffff81db0aa4>] [<ffffffff81db0aa4>] usb_set_interface+0x34/0x9c0 [ 95.400694] RSP: 0018:ffff8803a45a7d18 EFLAGS: 00010202 [ 95.400744] RAX: dffffc0000000000 RBX: ffff8803a3cbab2c RCX: 1ffff10006ba18e2 [ 95.400809] RDX: 0000000000000008 RSI: 0000000000000000 RDI: 0000000000000040 [ 95.400873] RBP: ffff8803a45a7d88 R08: 0000000000000001 R09: 0000000000000001 [ 95.400938] R10: ffff8803a4414a38 R11: 0000000000000000 R12: ffff8803bc482400 [ 95.401004] R13: dffffc0000000000 R14: ffff8803a3cb8000 R15: 0000000000000000 [ 95.401069] FS: 00007f19fbd19700(0000) GS:ffff8803c6900000(0000) knlGS:0000000000000000 [ 95.401141] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.401190] CR2: 0000558300d51d44 CR3: 000000009af29000 CR4: 00000000003406e0 [ 95.401255] Stack: [ 95.401277] ffff8803a5b5ea20 ffff8803a45a7d40 ffffffffa1490f0f 0000000000000061 [ 95.401358] ffff8803a5b5e510 ffff8803a45a7d58 ffffffffa147003c ffff880300000000 [ 95.401438] ffff880300000000 ffff8803a3cbab2c ffff8803bc482400 dffffc0000000000 [ 95.401518] Call Trace: [ 95.401547] [<ffffffffa1490f0f>] ? xc5000_sleep+0x8f/0xd0 [xc5000] [ 95.405722] [<ffffffffa147003c>] ? fe_standby+0x3c/0x50 [tuner] [ 95.409842] [<ffffffffa1440b20>] au0828_v4l2_close+0x3a0/0x590 [au0828] [ 95.412140] [<ffffffffa1301270>] v4l2_release+0xf0/0x210 [videodev] [ 95.414119] [<ffffffff815c2c4f>] __fput+0x20f/0x6d0 [ 95.416046] [<ffffffff815c317e>] ____fput+0xe/0x10 [ 95.417879] [<ffffffff811acde7>] task_work_run+0x137/0x200 [ 95.419656] [<ffffffff81005d54>] exit_to_usermode_loop+0x154/0x180 [ 95.421420] [<ffffffff8124a1b6>] ? trace_hardirqs_on_caller+0x16/0x590 [ 95.423177] [<ffffffff810073a6>] syscall_return_slowpath+0x186/0x1c0 [ 95.424911] [<ffffffff822e7a1c>] entry_SYSCALL_64_fastpath+0xbf/0xc1 [ 95.426629] Code: 00 00 00 00 fc ff df 48 89 e5 41 57 41 56 41 55 41 54 49 89 ff 53 48 83 c7 40 48 83 ec 48 89 55 c8 48 89 fa 48 c1 ea 03 89 75 d0 <80> 3c 02 00 0f 85 67 07 00 00 49 8d 7f 18 48 b8 00 00 00 00 00 [ 95.428560] RIP [<ffffffff81db0aa4>] usb_set_interface+0x34/0x9c0 [ 95.430358] RSP <ffff8803a45a7d18> [ 95.432566] ---[ end trace 3e95e11ff0b9efaf ]---
As nobody expects someone to do infinite loops binding/unbinding both drivers, I guess it is ok to keep it for Kernel 4.6, but we need to find a way fix those locking issues for dynamic graph changes.
Yes. Right. We have to look at these closely. I agree nobody runs a stress bin/ubind and rmmod/modprobe like we are doing. I think there is some lock and race type issue in au0828 v4l2 release path. I have had to fix some issues there in the past. I agree with you that we are good for 4.6-rc1 and I can continue to look at this. We can get this fixed for rc2 or rc3.
thanks, -- Shuah