From: Conor Dooley conor.dooley@microchip.com
The k210 U-Boot port has been using the clocks defined in the devicetree to bring up the board's SRAM, but this violates the dt-schema. As such, move the clocks to a dedicated node with the same compatible string. The regs property does not fit in either node, so is replaced by comments.
Tested-by: Niklas Cassel niklas.cassel@wdc.com Signed-off-by: Conor Dooley conor.dooley@microchip.com --- arch/riscv/boot/dts/canaan/k210.dtsi | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi index 44d338514761..cd4eae82d8b2 100644 --- a/arch/riscv/boot/dts/canaan/k210.dtsi +++ b/arch/riscv/boot/dts/canaan/k210.dtsi @@ -69,11 +69,13 @@ cpu1_intc: interrupt-controller {
sram: memory@80000000 { device_type = "memory"; + reg = <0x80000000 0x400000>, /* sram0 4 MiB */ + <0x80400000 0x200000>, /* sram1 2 MiB */ + <0x80600000 0x200000>; /* aisram 2 MiB */ + }; + + sram_controller: memory-controller { compatible = "canaan,k210-sram"; - reg = <0x80000000 0x400000>, - <0x80400000 0x200000>, - <0x80600000 0x200000>; - reg-names = "sram0", "sram1", "aisram"; clocks = <&sysclk K210_CLK_SRAM0>, <&sysclk K210_CLK_SRAM1>, <&sysclk K210_CLK_AI>;