On 7/20/18 2:27 AM, Hans de Goede wrote:
The volumes are taken from this commit: https://github.com/plbossart/UCM/commit/753e2430cd0e6cafbf10c6b29b689dbd32ac...
That commit also adds line-in support, so it has not been taken in its entirety.
Was there anything wrong with the line-in? It's been a while and I fried my board but I think it worked ok. The settings came from Bard Liao.
Signed-off-by: Hans de Goede hdegoede@redhat.com
src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf index 5dcb11e6..d6e8e48d 100644 --- a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf +++ b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf @@ -117,16 +117,13 @@ SectionDefaults [ cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
# default state
- cset "name='ADC Capture Volume' 126" cset "name='HPO MIX DAC1 Switch' on" cset "name='HPO MIX HPVOL Switch' off"
- cset "name='HP Playback Volume' 0" cset "name='HPO L Playback Switch' off" cset "name='HPO R Playback Switch' off" cset "name='HPOVOL L Switch' on" cset "name='HPOVOL R Switch' on" cset "name='IF1 ASRC Switch' on"
- cset "name='IN Capture Volume' 27" cset "name='IN2 Boost' 1" cset "name='IN1 Boost' 1" cset "name='LOUT L Playback Switch' on"
@@ -145,6 +142,13 @@ SectionDefaults [ cset "name='Headphone Switch' off" cset "name='Speaker Switch' off"
- # volumes for 0dB
- cset "name='OUT Playback Volume' 31"
- cset "name='HP Playback Volume' 31"
- cset "name='IN Capture Volume' 23"
- cset "name='ADC Capture Volume' 47"
- cset "name='DAC1 Playback Volume' 175"
- # input cset "name='Stereo1 ADC L1 Mux' ADC" cset "name='Stereo1 ADC R1 Mux' ADC"