The "AMP Enable Switch" is useful in systems with multiple amplifiers connected to the same audio bus but not all of them are needed for all use cases.
Signed-off-by: Vlad Karpovich vkarpovi@opensource.cirrus.com --- sound/soc/codecs/cs35l45.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/cs35l45.c b/sound/soc/codecs/cs35l45.c index 6c8f179b9c1c..ddbf26f2e73a 100644 --- a/sound/soc/codecs/cs35l45.c +++ b/sound/soc/codecs/cs35l45.c @@ -417,6 +417,8 @@ static const struct snd_kcontrol_new cs35l45_dsp_muxes[] = { static const struct snd_kcontrol_new cs35l45_dac_muxes[] = { SOC_DAPM_ENUM("DACPCM Source", cs35l45_dacpcm_enums[0]), }; +static const struct snd_kcontrol_new amp_en_ctl = + SOC_DAPM_SINGLE("Switch", SND_SOC_NOPM, 0, 1, 0);
static const struct snd_soc_dapm_widget cs35l45_dapm_widgets[] = { SND_SOC_DAPM_SPK("DSP1 Preload", NULL), @@ -479,6 +481,8 @@ static const struct snd_soc_dapm_widget cs35l45_dapm_widgets[] = {
SND_SOC_DAPM_MUX("DACPCM Source", SND_SOC_NOPM, 0, 0, &cs35l45_dac_muxes[0]),
+ SND_SOC_DAPM_SWITCH("AMP Enable", SND_SOC_NOPM, 0, 0, &_en_ctl), + SND_SOC_DAPM_OUT_DRV("AMP", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_OUTPUT("SPK"), @@ -586,7 +590,8 @@ static const struct snd_soc_dapm_route cs35l45_dapm_routes[] = {
CS35L45_DAC_MUX_ROUTE("DACPCM"),
- { "SPK", NULL, "AMP"}, + { "AMP Enable", "Switch", "AMP" }, + { "SPK", NULL, "AMP Enable"}, };
static const char * const amplifier_mode_texts[] = {"SPK", "RCV"};